NERF Loadout Cyberlight Ghost Blaster колдонуу боюнча колдонмосу

Introduction

This manual provides essential information for the safe and effective use of your NERF Loadout Cyberlight Ghost Blaster. Please read thoroughly before assembly and operation.

Коопсуздук эрежелери

8 жаштан жогоркулар үчүн.

ЭСКЕРТҮҮ: Көздү же бетти бутага албаңыз.

The use of protective eyewear is recommended for players and people within range.

Use only official Nerf N1 darts. Other darts may not meet safety standards.

Do not modify darts or the blaster.

Пакеттин мазмуну

Your NERF Loadout Cyberlight Ghost Blaster package includes:

• 1x NERF Loadout Cyberlight Ghost Blaster
• 1x Баррел тиркемеси
• 1x Көрүүчү тиркеме
• 1x Кампадан тиркелген
• 1x Dart holder attachment
• 24x Nerf N1 Darts

Image: The NERF Loadout Cyberlight Ghost Blaster is shown in its retail packaging, displaying the main blaster unit, barrel, sight, stock, dart holder, and 24 N1 darts.

Орнотуу жана чогултуу

Монтаждоо көрсөтмөлөрү

1. Батареяны орнотуу:

   Батарея бөлүкчөсүн табыңыз.

   Insert 2 x 1.5V AAA alkaline batteries (not included).

   Батарея отсегин бекем жабыңыз.

2. Баррелди тиркөө: Align the barrel attachment with the front of the blaster and twist to secure.
3. Attach Sight: Slide the sight attachment onto the tactical rail on top of the blaster until it clicks into place.
4. Attach Stock: Connect the stock attachment to the rear of the blaster.
5. Attach Dart Holder: Secure the dart holder attachment to the designated slot on the blaster.
6. Adjust Reload Bolt: The reload bolt can be unscrewed and re-attached to either side of the blaster for left-handed or right-handed users.

Дарт жүктөө

The Cyberlight Ghost Blaster features a 6-dart rotating cylinder.

1. Бластер праймер менен капталбаганын текшериңиз.
2. Insert one N1 dart into each of the six openings in the rotating cylinder from the top.
3. Additional N1 darts can be stored in the attached dart holder.

Иштөө нускамалары

Firing the Blaster

1. Дарттарды жүктөө: Follow the "Loading Darts" instructions above.
2. Blasterди иштетиңиз: Pull the reload bolt (located on the side of the blaster) all the way back and then push it forward until it locks into place.
3. Максаты: Use the sight to aim at your target.
4. Өрт: Pull the trigger to launch a dart.
5. Кайталоо: To fire another dart, prime the blaster again. The cylinder will rotate to the next loaded dart.

Ыңгайлаштыруу

The NERF Loadout system allows for extensive customization. All included accessories (barrel, sight, stock, dart holder) are interchangeable with other NERF Loadout blasters (sold separately). This enables over 1000 possible combinations to create your ultimate blaster setup.

Кароо жана тейлөө

• Тазалоо: Жардыргычты жарнама менен сүртүңүзamp cloth to remove dust and dirt. Do not submerge in water.
• Дартс кам көрүү: Keep darts clean and dry. Avoid bending or damaging darts, as this can affect performance.
• Сактагыч: Бластер менен дартсты салкын, кургак жерде, күндүн нуру түз тийбеген жерде сактаңыз.
• Батареяны алмаштыруу: Replace batteries when the LED lights dim or cease to function.

Жалпы маселелер

• Darts not firing: Ensure the blaster is properly primed and darts are fully inserted into the cylinder. Check battery level if LED lights are not working.
• Darts falling out: Ensure only official Nerf N1 darts are used. Darts may fall out if the blaster is shaken vigorously.
• LED чырактары иштебей жатат: Батареялар туура орнотулганын жана түгөнүп калбаганын текшериңиз. Зарыл болсо, батареяларды алмаштырыңыз.

Продукт спецификациялары

Кепилдик жана колдоо

For warranty details and customer support, please refer to the manufacturer's official webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Бардык кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

Расмий продукт Videos

No official seller videos for this specific product were found. Please refer to the manufacturer's website for general product information and videos.