TrustFire Mini X7 жалпак EDC фонаригин колдонуу боюнча колдонмо

Introduction

This manual provides detailed instructions for the safe and effective operation of your TrustFire Mini X7 Flat EDC Flashlight. Please read this manual thoroughly before use and retain it for future reference.

Продукт бүттүview

Негизги өзгөчөлүктөрү:

• 3-in-1 Functionality: White LED (750 Lumens), Red Beam, and Distance Meter.
• Adjustable Brightness: Four white light modes.
• Real-time Distance Measurement: 0.03 to 30 meters with 2mm precision.
• Magnetic Tail: For hands-free operation.
• Durable Construction: Aluminum alloy, IPX6 waterproof, 1-meter impact resistance.
• Rechargeable: USB-C charging.

Пакеттин мазмуну:

• TrustFire Mini X7 Flashlight
• C түрүндөгү кубаттоочу кабель
• User Manual

Image: The TrustFire Mini X7 flashlight, showcasing анын компакт дизайны жана интегралдык дисплей.

Image: Illustration of the Mini X7's three primary functions: white light, white light with red beam, and distance meter.

Жайгашуу

Аппаратты заряддоо:

1. Түзмөктөгү USB-C кубаттоо портун табыңыз.
2. Connect the provided Type-C cable to the flashlight and a compatible USB power source (e.g., computer, wall adapter).
3. Заряддоо учурунда индикатордун жарыгы кызыл болуп күйөт, ал эми толук заряддалганда жашыл болуп күйөт.

Image: Visual representation of the charging status indicator: red for charging, green for fully charged.

Иштөө нускамалары

Режим тандоо:

The Mini X7 features a side toggle button for mode selection. Move the toggle to switch between modes:

• Эң жогорку кызмат орду: Switch Mode (Power On/Off)
• Ортодогу абалы: Lighting Mode (Flashlight functions)
• Төмөнкү абалы: Distance Meter Mode

Image: Diagram illustrating the side toggle button positions for Switch, Lighting, and Distance Meter modes.

Flashlight Operation (Lighting Mode):

When the side toggle is in the middle position (Lighting Mode):

• Күйгүзүү/өчүрүү: Press the round button once to turn the white light on or off.
• Жарыктыкты жөндөө: With the light on, short press the round button to cycle through brightness modes: Low (2.5lm), Medium (50lm), High (200lm), Extreme High (750lm).
• Strobe режими: Press and hold the round button for 3 seconds to activate strobe mode. (Strobe is only accessible in Lighting Mode).
• Red Beam Activation: Press and hold the round button for 1 second to turn on the red beam.

Image: Visual guide to the round button functions for brightness adjustment, strobe, and red beam activation.

Image: A person using the Mini X7 flashlight with both white light and red beam activated in an outdoor setting.

Distance Meter Operation (Distance Meter Mode):

When the side toggle is in the bottom position (Distance Meter Mode):

1. Жалгыз өлчөө: Short press the round button to start a measurement. Press again to stop and display the result.
2. Үзгүлтүксүз өлчөө: Press and hold the round button for continuous measurement. Release to stop.
3. Changing Measurement Reference: In Measurement Mode, short press the round button to cycle through measurement reference points (Pre Datum Measurement or Post Datum Measurement).
4. Бирдиктерди өзгөртүү: The device supports meters (m), feet (ft), inches (in), and fractional inches (-/in). Refer to the settings mode for unit conversion.

Image: Diagram showing how to change the measurement reference point (Pre Datum vs. Post Datum) on the Mini X7's display.

Image: Illustration of the five measurement units available on the Mini X7: meters, feet, inches, and fractional inches.

Орнотуулар режими:

To enter Settings Mode (for CRL, Measurement Unit, Backlight On/Off):

1. Push the side toggle button to its top position (Switch Mode).
2. Press and hold the round button for 5 seconds.
3. Release immediately after the screen turns off.
4. Чыгарылгандан кийин дарооasing (within 1 second), press and hold the round button again for 5 seconds to enter Settings Mode.
5. In Settings Mode: Short press the round button to change settings (cycle through CRL, Measurement Unit, Backlight On/Off). Press and hold for 1 second to confirm the setting and move to the next one.

Image: Step-by-step visual guide on how to access and navigate the settings mode for CRL, measurement units, and backlight control.

Магниттик куйрук:

The integrated magnetic tail allows for hands-free operation by attaching the flashlight to metallic surfaces. This is useful for tasks requiring both hands, such as vehicle maintenance or workshop activities.

Сүрөт: Мисamples of using the Mini X7's magnetic base for hands-free lighting during home repair, camping, and workshop tasks.

Техникалык тейлөө

• Тазалоо: Кол чырактын корпусун жумшак менен сүртүңүз, гamp кездеме. Абразивдүү тазалагычтарды же эриткичтерди колдонбоңуз.
• Сактагыч: Түзмөктү узак убакыт бою колдонбогон учурда, аны салкын, кургак жерде, күн нуру түз тийбеген жерде сактаңыз.
• Батареяга кам көрүү: Recharge the battery regularly, even if not frequently used, to maintain battery health. Avoid fully discharging the battery for prolonged periods.
• Суу каршылык: The Mini X7 is IPX6 waterproof. While it can withstand heavy rain and splashes, it is not designed for submersion. Ensure the charging port cover is securely closed to maintain water resistance.

Image: The TrustFire Mini X7 flashlight being exposed to water splashes, demonstrating its IPX6 waterproof rating.

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

For warranty information and customer support, please refer to the official TrustFire webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.

You can visit the official TrustFire store on Amazon for more information: TrustFire Store