ANZZI Series Frameless Sliding Shower Door

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your ANZZI Series frameless sliding shower door. Please read all instructions carefully before beginning installation to ensure proper function and safety. Professional installation is recommended.

Сүрөт 1: Алдыңкы view of the ANZZI Series Frameless Sliding Shower Door.

Коопсуздук маалыматы

• Орнотуу учурунда ар дайым коргоочу көз айнек тагыныңыз.
• Handle glass panels with extreme care. Tempered glass can shatter if struck at the edges.
• Бардык орнотуучу беттер структуралык жактан бекем жана душтун эшигинин салмагын көтөрө ала тургандыгын текшериңиз.
• Use appropriate tools and follow all local building codes.
• Do not overtighten screws, as this may damage components or glass.
• Балдарды жана үй жаныбарларын орнотуу аянтынан алыс кармаңыз.

Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттердин бар экенин жана бузулбаганын текшериңиз. Эгерде кандайдыр бир тетиктер жок болсо же бузулган болсо, ANZZI кардарларды колдоо кызматына кайрылыңыз.

• Tempered Clear Glass Panels (Deco-Glass, 3/8" / 10mm thick)
• Rhino Alloy Hardware (Brushed Gold finish)
• Sliding Rail and Rollers
• Wall Brackets and Support Bar
• Bottom Rail and Guide Block
• Door Handles
• Тыгыздоочу тилкелер жана прокладкалар
• Орнотуу бурамалары жана анкерлери

Техникалык шарттар

Figure 2: Product dimensions and reversible installation feature.

Орнотуу жана орнотуу

For a visual guide, please refer to the official installation video below. Ensure you have all necessary tools and follow safety precautions.

Негизги орнотуу кадамдары:

1. Өлчөө жана даярдоо: Accurately measure your shower opening (W1 and W2) to ensure proper fit. Verify walls are plumb and level. Mark the installation points for the wall brackets.
2. Дубал кашааларын орнотуу: Drill holes at the marked locations. Secure the wall bracket plates, ensuring they are plumb.
3. Prepare Support Bar: Remove wall brackets from the support bar. If necessary, cut the support bar to the required length (W1 minus 1.5 inches).
4. Install Support Bar: Attach the support bar to the installed wall bracket plates. Ensure it is level and secure.
5. Install Bottom Rail and Guide Block: Position the bottom rail and guide block at the center of the shower base. Mark and drill holes. Secure with screws if drilling into acrylic or wood, or use silicone sealant for tile.
6. Роликтерди айнек панелдерге бекитүү: Assemble the rollers, gaskets, washers, and stoppers onto the glass panels. Ensure the side holes point upward.
7. Hang Fixed Glass Panel: Carefully lift and hang the fixed glass panel onto the support bar. Ensure it is properly seated and secured.
8. Hang Sliding Glass Panel: Hang the sliding glass panel onto the support bar. Place a cloth or blanket under the door for protection during this step.
9. Adjust Door Alignment: Slightly push the door to the wall to check if the water sealing strip aligns. If not, loosen the screw of the roller and turn the eccentric block to adjust the door's position. Retighten screws after adjustment.
10. Эшиктин туткаларын орнотуу: Attach the door handles to the designated holes on the glass panels using the provided screws, anchors, and gaskets.
11. Силикон герметикти колдонуу: Apply silicone sealant along the bottom rail and vertical edges where the glass meets the wall to ensure a watertight seal.

3-сүрөт: Сол же оң жагын ачуу үчүн кайра орнотуу параметрлери.

Иштөө нускамалары

Your ANZZI frameless sliding shower door is designed for smooth and quiet operation. To open or close the door, gently slide the handle along the track. Avoid forcing the door, as this may damage the rollers or track. The door features easy glide rollers for effortless movement.

Техникалык тейлөө

Душ кабинаңыздын эшигинин узакка кызмат кылуусун жана көрүнүшүн үзгүлтүксүз тазалоо жана техникалык тейлөө камсыздайт.

• Айнек тазалоо: The Tsunami Guard coating repels water, soap scum, and mineral staining, making cleaning easier. For best results, wipe down the glass after each use with a soft cloth or squeegee. For deeper cleaning, use a non-abrasive glass cleaner. Avoid harsh chemicals or abrasive pads that could damage the Tsunami Guard coating.
• Аппараттык тазалоо: Clean the brushed gold Rhino Alloy hardware with a soft, damp кездеме. Абразивдүү тазалоочу каражаттарды, болоттон жасалган жүндү же аммиак, агартуучу же кислота камтыган тазалоочу каражаттарды колдонбоңуз, анткени алар капталга зыян келтириши мүмкүн.
• Мөөрлөр жана прокладкалар: Periodically check the sealing strips and gaskets for wear or damage. Replace them if necessary to maintain a watertight enclosure.
• Роликти тейлөө: Ensure the rollers are free of debris and operate smoothly. If they become stiff, clean them and apply a small amount of silicone-based lubricant if needed.

Figure 4: Deco-Glass with Tsunami Guard coating for easy cleaning.

Проблемаларды чечүү

If you encounter issues with your shower door, try the following solutions:

• Door does not slide smoothly: Check rollers for debris. Clean and lubricate if necessary. Ensure the track is clear.
• Суунун агып чыгышы: Inspect all silicone sealant lines and sealing strips. Reapply sealant or replace worn seals as needed. Ensure the door is properly aligned and closes completely.
• Door alignment issues: Refer to the installation video and step 9 in the Setup section to adjust the eccentric blocks on the rollers.

Кепилдик жана колдоо

ANZZI жан дүйнө тынчтыгын сунуштайт ӨМҮР БОЙДУК КЕПИЛДИК on all products, reflecting our commitment to quality and durability. For technical assistance, replacement parts, or warranty claims, please contact ANZZI customer support.

ANZZI Customer Support:

• Webсайт: www.anzzi.com
• Телефон: 1-844-44-ANZZI (for general inquiries)
• Электрондук почта: support@anzzi.com