Hover-1 Journey 2.0 электр скутеринин колдонуучу колдонмосу

Introduction

The Hover-1 Journey 2.0 Electric Scooter is designed for adults and teens seeking an efficient and enjoyable commuting solution. Equipped with a powerful 300W brushless motor, it offers a maximum speed of 16 mph and a range of up to 16 miles on a single charge. Its 8.5-inch air-filled tires provide a smooth ride, while the upgraded steering column and two-part folding mechanism enhance handling, stability, and portability. The scooter features a digital LED display for essential ride information and is UL2272 certified for safety.

Figure 1: The Hover-1 Journey 2.0 Electric Scooter.

Коопсуздук эрежелери

Your safety is paramount. Always adhere to the following guidelines when operating the Hover-1 Journey 2.0 Electric Scooter:

• Always wear a certified helmet and appropriate safety gear, including knee and elbow pads.
• Ар бир сапардан мурун скутердин толук заряддалганын жана бардык компоненттеринин бекем бекитилгенин текшериңиз.
• 264 фунт (120 кг) максималдуу салмак чегинен ашпаңыз.
• Operate the scooter on smooth, dry surfaces. Avoid wet conditions, loose debris, or steep inclines beyond 15 degrees.
• Be aware of your surroundings and other pedestrians or vehicles. Follow all local traffic laws and regulations.
• Жогорку ылдамдыкта кескин бурулуштардан же маневрлерден алыс болуңуз.
• The scooter is UL2272 certified, indicating it has met safety standards for electric mobility devices.
• Note the "WARNING: DO NOT STEP HERE" sticker on the rear fender, indicating a critical area to avoid stepping on during operation.

Пакеттин мазмуну

Пакетти ачкандан кийин, төмөнкү нерселердин бардыгы камтылганын текшериңиз:

• Hover-1 Journey 2.0 Electric Scooter
• Hover-1 Wall Charger
• Journey 2.0 User Manual

Жайгашуу

Follow these steps to set up your Hover-1 Journey 2.0 Electric Scooter:

1. Скутерди ачуу: Carefully lift the steering column until it locks into the upright position. Ensure the folding lock mechanism is securely engaged. The upgraded 2-part folding mechanism with a safety latch provides enhanced stability.
2. Руткаларды тиркөө: Insert the handlebars into the steering column and secure them with the provided bolts. Ensure they are tightened firmly.
3. Баштапкы төлөм: Before the first ride, fully charge the scooter's 36V/6Ah lithium-ion battery. Connect the Hover-1 Wall Charger to the charging port on the scooter and then to a power outlet. The charging indicator will show when charging is complete (approximately 5 hours).
4. Шинанын басымын текшерүү: The 8.5-inch air-filled tires require proper inflation for optimal performance and safety. Check the tire pressure and inflate if necessary according to the recommended PSI (usually found on the tire sidewall or in the quick start guide).

Figure 2: Key specifications of the Hover-1 Journey 2.0.

Иштөө нускамалары

Familiarize yourself with the scooter's controls and functions before riding.

• Күйгүзүү/өчүрүү: Press and hold the power button on the handlebars to turn the scooter on or off.
• Digital LED дисплей: The integrated display shows your current speed, battery level, and indicators for high-speed mode, cruise control, and headlight activation.
• Муунткуч: To accelerate, push off with one foot to gain initial momentum, then press the thumb throttle located on the right handlebar.
• Тормоздоо: Use the rear disc brake lever on the left handlebar to slow down or stop. The scooter features high-performance rear disc brakes for quick and safe stopping.
• Ылдамдык режимдери: The scooter offers different speed modes. Refer to the display to switch between modes (e.g., Eco mode for lower speed, Sport mode for maximum speed).
• Фара: Activate the headlight for improved visibility in low-light conditions. The headlight icon on the display will indicate its status.
• Бүктөө: To fold the scooter for storage or transport, disengage the safety latch and folding lock mechanism on the steering column. Carefully fold the column down until it clicks into place.

Figure 3: Handlebar controls and digital display functions.

Figure 4: Portability and folding design of the scooter.

Техникалык тейлөө

Үзгүлтүксүз техникалык тейлөө скутериңиздин узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.

• Батареяга кам көрүү:
  • Батареяны ар бир колдонуудан кийин толук кубаттаңыз, айрыкча, узак убакытка сактасаңыз.
  • Батареянын кубатын толугу менен түгөтүп жиберүүдөн алыс болуңуз, анткени бул анын иштөө мөөнөтүн кыскартышы мүмкүн.
  • Скутерди түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Шиналарды тейлөө:
  • Regularly check the pressure of the 8.5-inch air-filled tires. Proper inflation improves ride quality and prevents punctures.
  • Inspect tires for wear and tear, and replace them if necessary.
• Тазалоо:
  • Скутерди жарнама менен сүртүңүзamp колдонгондон кийин кездемеге сүртүңүз. Катуу химиялык заттарды же абразивдүү тазалоочу каражаттарды колдонуудан алыс болуңуз.
  • Do not use high-pressure water jets, as this can damage electronic components.
• Жалпы текшерүү:
  • Мезгил-мезгили менен бардык бурамалар менен болттордун бекемдигин текшерип туруңуз.
  • Inspect the brake system for proper function and adjust if needed.
  • Ensure the folding mechanism operates smoothly and securely.

Проблемаларды чечүү

If you encounter issues with your Hover-1 Journey 2.0, refer to the common problems and solutions below:

If the problem persists after attempting these solutions, please contact Hover-1 customer support for further assistance.

Техникалык шарттар

Кепилдик жана колдоо

The Hover-1 Journey 2.0 Electric Scooter comes with a 6 айлык чектелген кепилдик. This warranty covers manufacturing defects and issues arising from normal use. Please retain your proof of purchase for warranty claims.

Техникалык колдоо, кепилдик боюнча суроолор же алмаштыруучу тетиктер үчүн расмий Hover-1 сайтына кириңиз webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Көбүрөөк маалымат жана байланыш маалыматтарын даректен таба аласыз Hover-1 Store Page.