Продукт бүттүview
The ALLmeter DTI Digital Dial Indicator is a precision measuring tool designed for accurate dimensional measurements in various mechanical and industrial applications. It features a large LCD display for easy readability, switchable metric and imperial units, and a zero-setting function for versatile use.
Сүрөт 1: Алдыңкы view of the ALLmeter DTI Digital Dial Indicator, showing the LCD display and control buttons.
Figure 2: Detailed diagram illustrating the key components and dimensions of the digital dial indicator, including the LCD display, on/off switch, inch/mm switch, zero-setting button, holding point for clamp, spring-loaded probe, and screw thread type M2.5.
Эмне камтылган
Пакетти ачканда, бардык компоненттер бар экенин текшериңиз:
- Digital Dial Indicator unit
- Rear Cover (for mounting)
- 1.5V Battery (LR44 type)
- Көрсөтмө (бул документ)
Figure 3: Image showing the complete contents of the product package, including the digital dial indicator, rear cover, battery, and instruction manual.
Жайгашуу
1. Батареяны орнотуу
The digital dial indicator requires one LR44 1.5V button cell battery. The battery compartment is located on the side of the unit.
- Батарея уясынын капкагын табыңыз.
- Бөлүктү ачуу үчүн капкакты акырын жылдырыңыз же ачыңыз.
- Insert the LR44 battery with the positive (+) side facing upwards.
- Батарея уясынын капкагын бекем жабыңыз.
Сүрөт 4: Жакын пландан view of the digital dial indicator, highlighting the convenient LR44 battery compartment for easy replacement and the zero button.
2. Attaching Rear Cover
The digital dial indicator comes with a detachable rear cover, allowing it to be used with different magnetic base holder stands or other mounting solutions. The standard rear cover can be replaced with the included metal back with a mounting lug for increased versatility.
- If a different rear cover is desired, use a small screwdriver to remove the screws securing the current rear cover.
- Carefully remove the existing cover.
- Align the desired rear cover (e.g., the metal one with mounting lug) with the screw holes.
- Secure the new cover by tightening the screws.
Video 1: Demonstration of how to detach and attach the rear cover of the digital dial indicator, showcasing its adaptability for various magnetic base holder stands.
Иштөө нускамалары
1. Күйгүзүү/өчүрүү
басыңыз OFF/ON аппаратты күйгүзүү же өчүрүү үчүн баскыч.
2. Unit Conversion (mm/inch)
басыңыз дюйм / мм button to switch between metric (millimeters) and imperial (inches) units. The selected unit will be displayed on the LCD screen.
Figure 5: Comparison of the digital dial indicator display showing measurements in both millimeters (mm) and inches (in), demonstrating the unit conversion feature.
3. Zero Setting
To set the current position as zero, press the НӨЛ button. This allows for relative measurements from any desired reference point.
4. Өлчөөлөрдү алуу
Extend or retract the spring-loaded probe to make contact with the surface to be measured. The measurement will be displayed instantly on the LCD screen.
Video 2: Operational demonstration of the electronic digital dial indicator, including switching between mm/inch units, performing zero setting, and taking measurements on a surface.
5. Автоматтык өчүрүү
The device features an automatic shutdown function to conserve battery life. If there is no operation for approximately 5 minutes, the indicator will automatically turn off.
Figure 6: Illustration of the automatic shutdown feature, indicating that the device powers off after 5 minutes of inactivity to save battery.
Техникалык тейлөө
1. Тазалоо
To ensure accurate readings and prolong the life of your digital dial indicator, keep it clean. Wipe the surface with a soft, dry cloth. Avoid using abrasive cleaners or solvents that could damage the display or housing.
2. Сактоо
When not in use, store the digital dial indicator in its protective case to prevent dust and damage. Store in a dry environment away from direct sunlight and extreme temperatures.
Figure 7: The digital dial indicator shown with its protective storage case and included batteries, emphasizing proper storage for protection and longevity.
3. Батареяны алмаштыруу
If the display starts flashing consistently, it indicates a low battery. Replace the LR44 battery as described in the "Battery Installation" section to ensure continued accurate operation.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей бош же күңүрт. | Батарея өлүп калган же туура эмес орнотулган. | Батареянын багытын текшериңиз. Зарыл болсо, батареяны алмаштырыңыз. |
| Display is flashing. | Батареянын төмөн көрсөткүчү. | LR44 батареясын алмаштырыңыз. |
| Туура эмес окуулар. | Dirt or debris on the probe or measuring surface; damaged probe; unit not properly zeroed. | Clean the probe and measuring surface. Re-zero the device. If problem persists, contact support. |
| Түзмөк күйбөйт. | Батарея көйгөйү; ички бузук. | Ensure battery is new and correctly installed. If still unresponsive, contact support. |
Техникалык шарттар
Figure 8: ашыкview of the digital dial indicator's key specifications, including measuring range, resolution, and operating conditions.
- Өлчөө диапазону: 0-25.4мм (0-1 дюйм)
- Чечим: 0.01мм (0.0005 дюйм)
- Жооп убактысы: ≤ 0.5 м/с
- Иштөө температурасы: 0 ~ 40 ° C (32 ~ 104 ° F)
- Сактоо температурасы: -20 ~ 70 ° C (-4 ~ 158 ° F)
- Салыштырмалуу нымдуулук: ≤ 80% R.H
- Материал: Aluminum Alloy frame
- Продукциянын өлчөмдөрү: 7.09 x 3.35 x 2.36 дюйм
- Салмагы: Болжол менен 129г (4.55 унция)
- Батарея түрү: 1 x LR44 1.5V button cell (included)
- Автоматтык өчүрүү: 5 мүнөт аракетсиздиктен кийин
Кепилдик жана колдоо
ALLmeter products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact ALLmeter customer service through the retailer where the product was purchased or visit the official ALLmeter webсайт.
Көбүрөөк маалымат алуу жана продукт жаңыртуулары үчүн, төмөнкү дарекке кириңиз ALLmeter Store on Amazon.
