WEUASTE BSD01 Motorcycle Blind Spot Detection System User Manual

Продукт бүттүview

The WEUASTE BSD01 Motorcycle Blind Spot Detection System is designed to enhance rider safety by providing comprehensive 360° protection. It monitors vehicles approaching from behind, left, and right sides, alerting the rider to potential hazards within its operational range. This IP67-rated waterproof system ensures reliable performance in various weather conditions, offering crucial extra reaction time for safer lane changes and maneuvers.

Негизги өзгөчөлүктөрү:

• 360° Blind Spot Monitoring: Detects vehicles approaching from the rear and sides.
• 24GHz Millimeter Wave Sensor: Provides precise and reliable detection.
• IP67 суу өткөрбөйт рейтинги: Ensures all-weather performance in rain, fog, or snow.
• ACC Power Support: Automatic power on/off with motorcycle ignition, preventing battery drain.
• 130° Rear Blind Spot Zone: Monitors a wide area behind the motorcycle.
• 30-Meter Safety Perimeter: Alerts when vehicles enter this critical zone.
• Өз алдынча орнотуунун оңой жолу: Warning lights attach with strong adhesive to rearview күзгүлөр.

Пакеттин мазмуну

The WEUASTE BSD01 system includes all necessary components for installation and operation:

• Радар сенсору
• LED Indicator Lights (Left & Right)
• Power Harness with ACC support
• BSD Bracket
• Кош тараптуу жабышчаак
• Орнотуу куралдары жана бурамалар
• Binding Straps (x10)
• Электр лентасы
• User Manual

Figure 1: Contents of the WEUASTE BSD01 Motorcycle Blind Spot Detection System package.

Орнотуу боюнча колдонмо

Follow these steps for proper installation of your WEUASTE BSD01 system:

1. Mounting the Radar Sensor:

1. Attach the double-sided adhesive to the host bracket.
2. Securely attach the host bracket to the radar sensor.
3. Mount the radar sensor at the back of the motorcycle. Ensure it is perpendicular to the ground at 90° and approximately 20 inches (50 cm) from the ground. The arrow on the sensor should point upwards.
4. Tighten the nuts with the provided wrench to secure the sensor.

Figure 2: Radar detection zone and sensor placement.

2. Installing LED Indicator Lights:

1. Identify the left (L) and right (R) warning lights.
2. Peel off the adhesive backing from the warning lights.
3. Attach the left warning light to the left rearview mirror and the right warning light to the right rearview mirror. Ensure they are clearly visible.

Figure 3: LED indicator lights mounted on rearview күзгүлөр.

3. Кубат туташуу:

1. Connect the positive wire of the power harness to your motorcycle's ACC (Accessory) line.
2. Connect the negative wire of the power harness to the battery terminal.
3. Secure all wiring using the provided binding straps and electrical tape to prevent interference and ensure durability.
4. The system will automatically power on and off with your motorcycle's ignition.

Figure 4: ACC power connection diagram.

Орнотуу видеолору:

Иштөө нускамалары

The WEUASTE BSD01 system operates automatically once installed and connected to the ACC power.

1. Автоматтык иштетүү: The system powers on automatically when your motorcycle is started and powers off when the ignition is turned off.
2. Аныктоо: The 24GHz millimeter wave sensor continuously monitors the 130° rear blind spot zone and a 30-meter safety perimeter.
3. Эскертүү көрсөткүчтөрү:
   • When a vehicle approaches from the left rear, the left yellow light on your rearview mirror will illuminate.
   • When a vehicle approaches from the right rear, the right yellow light on your rearview mirror will illuminate.
   • When a vehicle approaches directly from behind, both red lights in the center of the indicators will light up simultaneously.
4. Бардык аба ырайынын көрсөткүчү: The IP67 waterproof design ensures consistent radar detection performance even in heavy rain, fog, or snow.

Figure 5: Visual representation of the detection zones and warning lights.

Техникалык тейлөө

To ensure optimal performance and longevity of your WEUASTE BSD01 system, follow these maintenance guidelines:

• үзгүлтүксүз тазалоо: Keep the radar sensor and LED indicator lights clean from dirt, mud, and debris. Use a soft, damp cloth to wipe them gently. Avoid abrasive cleaners that could damage the surfaces.
• Зымдарды текшерүү: Periodically check all wiring connections for any signs of wear, fraying, or loose connections. Ensure all cable ties are secure.
• Сенсорду тегиздөө: Verify that the radar sensor remains perpendicular to the ground and securely mounted. Any significant impact or vibration could alter its alignment.
• Жабышкак текшерүү: Ensure the adhesive backing on the LED indicator lights remains firmly attached to your rearview mirrors. Reapply or replace if necessary.
• Жогорку басымдагы суудан алыс болуңуз: While the system is IP67 waterproof, avoid directing high-pressure water directly at the sensor or indicator lights during washing, as this could potentially compromise seals over time.

Проблемаларды чечүү

If you experience issues with your WEUASTE BSD01 system, refer to the following troubleshooting tips:

If issues persist after troubleshooting, please contact WEUASTE customer support for assistance.

Техникалык шарттар

• Бренд: WEUASTE
• Модел: WEUASTE BSD01
• Элемент Салмагы: 10.8 унция
• Продукциянын өлчөмдөрү: 1.96 x 1.96 x 0.7 дюйм
• Өндүрүүчү бөлүгүнүн номери: YY-BDS-2401
• Сырткы: боёлгон
• ASIN: B0F79LK6NP
• Биринчи жеткиликтүү болгон күнү: 2-май, 2025-жыл

Кепилдик жана колдоо

Your WEUASTE BSD01 Motorcycle Blind Spot System is backed by a 12 айлык кепилдик. WEUASTE is committed to quality and customer satisfaction.

For any questions or concerns, our dedicated 24/7 техникалык колдоо team is available to assist you. We guarantee to address all inquiries within 24 hours.

Please refer to your purchase documentation for specific warranty claim procedures or visit the official WEUASTE webбайланыш маалыматы үчүн сайт.