SUPERONE X11

SUPERONE MagSafe Car Mount Charger Instruction Manual

Brand: SUPERONE | Model: X11

Introduction

This manual provides comprehensive instructions for the installation, operation, and maintenance of your SUPERONE MagSafe Car Mount Charger. Designed for convenience and efficiency, this magnetic wireless car charger offers secure mounting and fast charging for your iPhone 12-16 series and MagSafe-compatible devices. Please read this manual thoroughly before use to ensure optimal performance and safety.

Продукт өзгөчөлүктөрү

Кутуда эмне бар

Орнотуу нускамалары

  1. Монтаждоо ордун тандоо: Select a flat, clean surface on your car's windshield, dashboard, or panel. Ensure the chosen location does not obstruct your view же айдоону башкаруу элементтерине тоскоолдук кылбаңыз.
  2. Бетти даярдоо: Clean the chosen mounting surface thoroughly with an alcohol wipe and allow it to dry completely. This ensures optimal adhesion for the suction cup.
  3. Apply Dash Pad (Optional, for textured dashboards): If mounting on a textured dashboard, first apply the included washable adhesive dash pad to the cleaned surface. Press firmly across the pad's edges to ensure even adhesion. Wait approximately 15 minutes after applying the pad before attaching the mount to allow the adhesive to set.
  4. Тоону тиркөө: Place the suction cup of the mount onto the prepared surface (or dash pad). Press down firmly on the suction cup, then push the locking lever down to create a vacuum seal.
  5. Туташуу кубаты: Connect the provided USB-C cable to the USB-C port on the car mount charger and plug the other end into a car charger adapter (a 20W+ USB-C Power Delivery (PD) adapter is recommended for best charging results). The ambient light on the charger will illuminate, indicating it has power.
Image showing the SUPERONE MagSafe car mount charger with a phone attached, illustrating its setup in a car interior.

Proper installation ensures a secure and stable charging experience.

Иштөө нускамалары

  1. Телефонуңузду тиркөө: Align your MagSafe-compatible iPhone (12-16 series) or MagSafe-enabled case with the magnetic charging surface of the mount. The strong N55 magnets will automatically snap your phone into place, ensuring proper alignment for wireless charging.
  2. Зымсыз кубаттоо: Once your phone is securely attached and the mount is powered, wireless charging will begin automatically. The ambient light may indicate charging status (refer to product specific light indicators if available).
  3. Тууралоо Viewбурч:
    • 360° айлануу: The magnetic charging head can be rotated 360 degrees to switch between portrait and landscape viewбагыттарды аныктоо.
    • Dual-Axis Adjustment: Utilize the dual-axis folding metal arms to adjust the height and distance of your phone, finding the optimal viewing angle for navigation or media consumption.
  4. Телефонуңузду алып салуу: Gently pull your phone away from the magnetic charging surface. Due to the strong magnetic hold, it is recommended to hold the base of the mount with one hand while removing your phone with the other, especially if the mount is on a dash pad.
Image demonstrating the 360-degree rotation and dual-axis adjustment capabilities of the mount.

Easily adjust your phone's position for optimal viewжана өз ара аракеттенүү.

Техникалык тейлөө

Проблемаларды чечүү

КөйгөйМүмкүн себепЧечим
Slow or No Charging
  • Insufficient power from car adapter.
  • Phone not properly aligned on charging surface.
  • Non-MagSafe case interfering with charging.
  • Ensure your car adapter provides at least 20W USB-C Power Delivery (PD).
  • Re-position phone to ensure it snaps centrally onto the magnetic surface.
  • Use a MagSafe-compatible case or remove the case for charging.
Mount Loses Suction/Falls Off
  • Surface not clean or dry during installation.
  • Температуранын кескин өзгөрүшү.
  • Suction cup is dirty.
  • Clean the mounting surface and suction cup thoroughly with alcohol and dry completely before re-applying.
  • Re-apply the mount, ensuring the locking lever is fully engaged.
  • Rinse the suction cup with water and air-dry to restore stickiness.
Phone Not Holding Securely
  • Using a non-MagSafe case or a very thick case.
  • Phone not centered on the magnetic surface.
  • Ensure you are using a MagSafe-compatible phone or case. Non-MagSafe cases will significantly reduce magnetic strength.
  • Ensure the phone is properly aligned and snapped onto the magnetic charging surface.

Техникалык шарттар

ӨзгөчөлүкДеталь
БрендSUPERONE
Модель номериX11
Элемент Салмагы5.9 унция
Пакеттин өлчөмдөрү3.19 x 3.19 x 2.32 дюйм
Шайкеш түзмөктөрiPhone 16/15/14/13/12 Series and MagSafe Cases
Монтаж түрүSuction Car Phone Mount Charger (Windshield/Dash)
ӨзгөчөлүктөрFoldable, One-Hand Operation, Rotatable
Магниттик күч24 N55 Magnets, up to 2800gf
Suction Cup DurabilitySupports up to 88 lbs, -40°F to 300°F
ӨндүрүүчүDongguan Bingli Changcheng Technology Co., Ltd.

Кепилдик жана колдоо

SUPERONE provides an 18-Month Hassle-free WARRANTY for this MagSafe Car Mount Charger, ensuring peace of mind regarding your purchase. We also offer LIFETIME SUPPORT биздин продуктылар үчүн.

Should you encounter any issues or have questions regarding your magnetic phone holder for car, please do not hesitate to contact our customer service team. We are committed to responding to all inquiries within 12 hours.

For support, please refer to the contact information provided on the product packaging or the official SUPERONE webсайт.