Morimoto XB Evo Hybrid LED Headlights User Manual

1. Киришүү

This manual provides detailed instructions for the installation, operation, and maintenance of your Morimoto XB Evo Hybrid LED Headlights. These headlights are designed to enhance the lighting performance and aesthetic of your Toyota 4Runner (2014-2024) with advanced Bi-LED projectors, bright Daytime Running Lights (DRL), and amber LED turn signals. Please read this manual thoroughly before beginning installation or operation to ensure proper function and safety.

Image 1.1: Toyota 4Runner equipped with Morimoto XB Evo Hybrid LED Headlights.

2. Коопсуздук маалыматы

Always prioritize safety during installation and operation. Failure to follow these guidelines may result in injury, damage to the product, or vehicle damage.

• Disconnect the vehicle's battery before beginning any electrical work to prevent electrical shock or short circuits.
• Тиешелүү жеке коргоочу шаймандарды, анын ичинде коопсуздук көз айнектерин жана кол каптарды кийиңиз.
• Унаа тегиз жерде токтоп турганына, токтоочу тормозду иштетиңиз.
• Allow the vehicle's engine and any hot components to cool down before working.
• Эгерде сиз орнотуу процессинин кайсы бир кадамы боюнча күмөн санасаңыз, квалификациялуу автоунаа технигине кайрылыңыз.
• Do not modify the headlight assemblies or wiring harnesses, as this may void the warranty and compromise safety.

3. Пакеттин мазмуну

Verify that all components are present and undamaged before proceeding with installation. The package should contain the following items:

• Pair of Morimoto XB Evo Hybrid LED Headlight Assemblies (Left and Right)
• Plug and Play Wiring Harnesses (specific to vehicle's original headlight type)
• DRL жабдыктары
• DRL Harness Extension
• Fuse Tap
• OE LED Harnesses (if applicable)
• OE Halogen Harnesses (if applicable)
• Resistors (if applicable)
• 9005 Connector Caps (if applicable)

Image 3.1: Morimoto XB Evo Hybrid LED Headlights and included wiring components.

Сүрөт 3.2: Детальдуу view of the various wiring harnesses and accessories.

4. Орнотуу жана орнотуу

4.1. Керектүү куралдар

• Розетка ачкычтарынын топтому
• Панелди алып салуу куралдары
• Бурагычтар (Phillips жана Flathead)
• Wire Strippers/Crimpers (if custom wiring is needed, though typically plug-and-play)
• Мультиметр (туташууларды текшерүү үчүн)
• Zip Ties or Cable Management Clips

4.2. Орнотууга чейинки кадамдар

1. Park the vehicle on a flat, stable surface and engage the parking brake.
2. Моторду өчүрүп, от алдыруудан ачкычты чыгарыңыз.
3. Унаанын аккумуляторунун терс терминалын ажыратыңыз.
4. Allow the engine bay to cool down completely.

4.3. Headlight Removal

1. Carefully remove any plastic clips, bolts, or screws securing the front bumper cover.
2. Gently pull the bumper cover away from the vehicle to access the headlight mounting bolts. It may not be necessary to fully remove the bumper, only to loosen it sufficiently.
3. Locate and remove the bolts securing the factory headlight assembly. Typically, there are bolts on the top, side, and sometimes underneath the headlight.
4. Carefully pull the factory headlight assembly forward, disconnecting all electrical connectors from the rear of the housing.
5. Башка тарап үчүн процессти кайталаңыз.

4.4. Зымдарды туташтыруу

The Morimoto XB Evo Hybrid headlights feature a plug-and-play design. The specific harnesses used will depend on whether your 4Runner originally came with LED or Halogen headlights.

1. Identify Original Headlight Type: Determine if your vehicle originally had LED or Halogen headlights. Select the corresponding Morimoto wiring harness (OE LED Harnesses or OE Halogen Harnesses).
2. Connect Main Headlight Harness: Connect the appropriate Morimoto main headlight harness to the vehicle's factory headlight connector.
3. DRL Harness Connection: Connect the DRL Harness to the designated port on the new headlight assembly. Use the DRL Harness Extension if needed for proper routing.
4. Fuse Tap Installation: Install the provided Fuse Tap into an appropriate fuse slot in the vehicle's fuse box (refer to your vehicle's owner's manual for an accessory fuse location). Connect the DRL harness to the fuse tap. This provides power for the Daytime Running Lights.
5. Resistor Installation (if applicable): If your vehicle requires resistors to prevent hyper-flashing or bulb-out warnings (common with some halogen-to-LED conversions), securely mount the resistors to a metal surface away from plastic components, as they can generate heat. Connect them as per the included resistor instructions.
6. 9005 Connector Caps (if applicable): Use these caps to seal any unused connectors.
7. Бардык байланыштар коопсуз жана туура орнотулганын текшериңиз.

4.5. Фараларды орнотуу

1. Carefully guide the new Morimoto XB Evo Hybrid LED Headlight assembly into the opening. Ensure all wiring is tucked away and not pinched.
2. Align the mounting points and secure the headlight assembly with the factory bolts removed earlier. Do not overtighten.
3. Repeat for the other headlight.
4. Reinstall the front bumper cover, ensuring all clips, bolts, and screws are reattached securely.

4.6. Орнотуудан кийинки текшерүүлөр

1. Унаанын аккумуляторунун терс терминалын кайра туташтырыңыз.
2. Turn on the vehicle's ignition and test all lighting functions: Daytime Running Lights, Low Beams, High Beams, and Turn Signals.
3. Verify that there are no dashboard warning lights related to the headlights.
4. Perform a headlight aiming adjustment. This is crucial for proper light distribution and to avoid blinding oncoming traffic. Consult your vehicle's service manual or a professional for correct aiming procedures.

5. Иштөө нускамалары

Your Morimoto XB Evo Hybrid LED Headlights are designed to integrate seamlessly with your vehicle's existing lighting controls.

5.1. Daytime Running Lights (DRL)

The integrated white LED DRLs will illuminate automatically when the vehicle is running and the headlights are off, or as per your vehicle's DRL settings. These provide enhanced visibility during daylight hours.

Image 5.1: Headlights with DRLs active.

5.2. Low Beam

Activate the low beams using your vehicle's standard headlight switch. The Bi-LED projectors will provide a wide and bright light pattern for general night driving, compliant with DOT standards.

5.3. Жогорку нур

Engage the high beams using your vehicle's standard high beam control. The Bi-LED projectors will switch to a more focused, intense beam pattern to illuminate further down the road.

5.4. Бурулуш сигналдары

The amber LED turn signals will activate with a fade-off effect when your vehicle's turn signal lever is engaged. Ensure they flash at the correct rate.

Image 5.2: Headlights with amber turn signals active.

6. Техникалык тейлөө

Proper maintenance ensures the longevity and optimal performance of your Morimoto XB Evo Hybrid LED Headlights.

6.1. Тазалоо

• Clean the headlight lenses regularly with a soft cloth and mild automotive soap or glass cleaner.
• Avoid abrasive cleaners or harsh chemicals, as these can damage the polycarbonate lens material.
• Самындын калдыктарын жок кылуу үчүн суу менен жакшылап чайкаңыз.

6.2. Текшерүү

• Periodically inspect the headlight assemblies for any signs of damage, cracks, or moisture intrusion.
• Check all wiring connections to ensure they remain secure and free from corrosion.
• Verify that all lighting functions (DRL, low beam, high beam, turn signals) are operating correctly.

7. Кыйынчылыктарды

This section addresses common issues you might encounter with your headlights.

8. Техникалык шарттар

9. Кепилдик жана колдоо

Morimoto stands behind the quality of the XB Evo Hybrid LED Headlights with an industry-leading беш жылдык кепилдик. This warranty covers manufacturing defects and ensures the product performs as intended under normal use.

For warranty claims, technical assistance, or any questions regarding your Morimoto product, please contact Morimoto customer support through their official website or authorized dealers. When contacting support, please have your purchase information and product model number (LF2-531Y) available.