Продукт бүттүview
The CYCLAMI Ultralight TPU Mountain Bike Inner Tubes are designed for mountain bikes and road bikes, offering a lightweight and durable alternative to traditional butyl rubber tubes. These tubes are compatible with 26x1.9-2.5" tires and feature a 45mm French Presta valve. They are engineered for enhanced performance, including reduced rotational weight, improved puncture resistance, and lower rolling resistance.
- Universal Fit: Compatible with 26x1.9-2.5" tires and 45mm Presta valves.
- Ультра жеңил: Weighing approximately 63g per tube, significantly lighter than standard butyl tubes.
- Аскердик даражадагы туруктуулугу: Constructed with 0.3mm reinforced TPU walls for superior puncture resistance and pressure handling (up to 150 PSI).
- Low Rolling Resistance: Ичке проfile minimizes tire friction for improved speed and efficiency.
Орнотуу боюнча колдонмо
Proper installation is crucial for optimal performance and longevity of your CYCLAMI TPU inner tube. Follow these steps carefully.
Орнотууга чейинки текшерүү
Before installing the new TPU inner tube, ensure there are no foreign objects inside the tire or on the rim strip that could cause punctures. Inspect the tire thoroughly for any sharp debris.
Figure 1: Cleaning the inner tube pad and outer tire to remove foreign objects.
Кадам-кадам орнотуу
- Prepare the Inner Tube: Slightly inflate the TPU inner tube (less than 3 PSI) to give it shape. This helps prevent pinching during installation. WARNING: Do not inflate the empty inner tube more than 5 PSI, as this can cause irreversible damage.
- Агышууларды текшерүү: Immerse the slightly inflated inner tube in water to check for any air leaks. If bubbles appear, indicating a leak, do not proceed with installation and contact support.
- Клапанды киргизүү: Locate the air nozzle hole on the wheel hub. Insert the Presta valve of the TPU inner tube through this hole.
- Position Inner Tube: Carefully place the inner tube inside the outer tire, ensuring it is evenly distributed around the rim.
- Install Outer Tire: Begin installing one bead of the outer tire onto the wheel hub. Then, carefully work the second bead onto the rim. This step requires patience to avoid pinching the inner tube. Tire levers can be used, but exercise extreme caution to prevent damaging the TPU tube.
- Үстүрүү: Once the outer tire is fully seated, inflate the inner tube to the recommended pressure. Refer to the maximum air pressure indicated on your tire (e.g., 120 PSI / 8.3 BAR).
- Apply Nozzle Sticker: Install the provided nozzle sticker over the valve stem base to help prevent dust and water from entering the tire's interior.
Video 1: Detailed installation guide for CYCLAMI TPU inner tubes. This video demonstrates the steps from preparing the tube to final inflation and sealing.
Figure 2: Inflating the TPU inner tube after installation.
Колдонуу жана тейлөө
Maintaining Tire Pressure
Regularly check your tire pressure using a reliable gauge. Maintaining the correct pressure, as indicated on your tire sidewall, is essential for performance, comfort, and puncture prevention. Over-inflation or under-inflation can lead to issues.
Puncture Repair
In the event of a puncture, CYCLAMI TPU inner tubes can be repaired using a standard TPU patch kit. Ensure the area around the puncture is clean and dry before applying the patch. No glue is required for these self-adhesive patches.
Video 2: Demonstration of repairing a TPU inner tube with a patch kit. This video illustrates the simple process of applying a self-adhesive patch.
Figure 3: Easy and convenient repair of a TPU inner tube using a patch.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Frequent Punctures | Debris in tire, improper tire pressure, sharp rim strip. | Thoroughly inspect tire and rim strip for debris. Maintain correct tire pressure. Replace worn rim strip. |
| Air Leakage (slow) | Small puncture, loose valve core, valve stem issue. | Check for punctures and patch if necessary. Tighten valve core. Inspect valve stem for damage. |
| Tube Pinching during Installation | Insufficient pre-inflation, improper tire seating. | Ensure tube is slightly inflated (less than 3 PSI) before seating. Carefully work tire beads onto rim, avoiding pinching. |
Продукт спецификациялары
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | CYCLAMI |
| Модель аты | MTB26 |
| Материал | TPU |
| Compatible Tire Size | 26x1.9-2.5 inches |
| Клапан түрү | Presta |
| Клапан узундугу | 45мм (1.77 дюйм) |
| Элемент Салмагы | Approximately 63 Grams per tube |
| Максималдуу басым | 150 PSI / 8.3 BAR |
Кепилдик жана колдоо
This CYCLAMI product comes with a 1 жылдык кепилдик. For any defects or issues, please contact our customer support. We offer 24/7 expert troubleshooting and a free replacement within 48 hours for any manufacturing defects, with no returns required.
Кошумча жардам алуу үчүн, сураныч, баш багыңыз CYCLAMI Store же сатып алууңуз менен берилген байланыш маалыматын караңыз.
