ECOELER 6-Inch Motion Sensor LED Ceiling Light

1. Киришүү

Thank you for choosing the ECOELER 6-Inch Motion Sensor LED Ceiling Light. This manual provides detailed instructions for the safe installation, operation, and maintenance of your new lighting fixture. Please read this manual thoroughly before installation and retain it for future reference.

Сүрөт 1.1: Алдыңкы view of the ECOELER 6-Inch Motion Sensor LED Ceiling Light.

2. Коопсуздук маалыматы

Өрт, электр шок же жеке жаракат алуу коркунучун азайтуу үчүн, ар дайым төмөнкү коопсуздук чараларын аткарыңыз:

• ЭСКЕРТҮҮ: Электр шок коркунучу. Орнотуудан же тейлөөдөн мурун сактагычтан же автоматтык өчүргүчтөн электр кубатын өчүрүңүз.
• Бул продуктту колдонуудагы орнотуу кодуна ылайык буюмдун курулушу жана иштеши жана ага байланыштуу коркунучтар менен тааныш адам тарабынан орнотулушу керек.
• Use only 120V AC, 60Hz circuits.
• Do not attempt to disassemble or modify the fixture. There are no user-serviceable parts inside.
• Бардык байланыштар коопсуз жана туура изоляцияланганын текшериңиз.
• Бул арматура ички колдонуу үчүн гана ылайыктуу.

3. Пакеттин мазмуну

Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:

• 6-Inch Black Motion Sensor LED Ceiling Light (x1)
• Монтаждоочу жабдыктар (бурамалар, зым гайкалар)
• E26 Adapter Accessories (for recessed can installation)
• Көрсөтмө (бул документ)

Image 3.1: Included accessories for installation.

4. Продукциянын өзгөчөлүктөрү

• 3CCT тандалышы мүмкүн: Choose between 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight) color temperatures.
• Кыймыл сенсору: Passive Infrared (PIR) sensor detects motion within 9-16 feet.
• Убакыттын жөнгө салынышы: Set the light to remain on for 30 seconds, 1 minute, or 5 minutes after motion ceases.
• Жарык сенсору: The motion sensor functions only in dark environments, remaining off during daylight hours.
• Энергияны үнөмдүү: 16W LED provides 1000 lumens of brightness.
• Ар тараптуу орнотуу: Compatible with 3.5 or 4-inch junction boxes and 5 or 6-inch recessed cans.

Image 4.1: Key features including PIR sensor, 3CCT, and time delay settings.

5. Орнотуу жана орнотуу

Before installation, ensure the power supply is turned off at the circuit breaker.

5.1. Junction Box Installation

1. Линзаны саат жебеси боюнча буруп алып салыңыз.
2. Connect the supply wires to the fixture wires using the provided wire nuts: black to black (live), white to white (neutral), and green/bare copper to green (ground).
3. Attach the fixture base to the junction box using the provided screws.
4. Twist the lens counter-clockwise to secure it back onto the fixture.

5.2. Recessed Can Installation

1. Линзаны саат жебеси боюнча буруп алып салыңыз.
2. Install the spring clips onto the fixture base using screws.
3. Connect the E26 adapter to the existing socket in the recessed can.
4. Connect the fixture wires to the E26 adapter wires using wire nuts.
5. Push the disk light into the recessed can until the spring clips secure it.
6. Twist the lens counter-clockwise to secure it back onto the fixture.

Image 5.1: Installation diagrams for junction box and recessed can.

6. Иштөө нускамалары

After successful installation and restoring power, the light will be ready for operation. The ECOELER motion sensor light operates automatically based on ambient light and motion detection.

6.1. Кыймыл сенсорунун функциясы

• Күндүз: The light remains off even if motion is detected, due to the integrated light sensor.
• Nighttime/Dark Environments: The light will automatically turn on when motion is sensed within its detection range (approximately 9-16 feet).
• The light will turn off after the set time delay if no further motion is detected.

Image 6.1: Motion sensor operation during day and night.

6.2. Color Temperature (CCT) Adjustment

The fixture offers three color temperature options: 3000K (Warm White), 4000K (Cool White), and 5000K (Daylight). To adjust the CCT:

1. Кубат өчүрүлгөнүн текшериңиз.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the CCT selector switch on the LED board (refer to Image 4.1).
4. Slide the switch to your desired color temperature setting (3000K, 4000K, or 5000K).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.2: Visual representation of 3CCT options.

6.3. Time Delay Adjustment

The light can be set to remain on for 30 seconds, 1 minute, or 5 minutes after motion is no longer detected. To adjust the time delay:

1. Кубат өчүрүлгөнүн текшериңиз.
2. Carefully remove the lens by twisting it clockwise.
3. Locate the time delay selector switch on the fixture (refer to Image 4.1).
4. Slide the switch to your desired time setting (30s, 1min, or 5mins).
5. Replace the lens by twisting it counter-clockwise.
6. Restore power to test the new setting.

Image 6.3: Time delay countdown feature.

7. Техникалык тейлөө

The ECOELER LED ceiling light requires minimal maintenance.

• Тазалоо: Тазалоодон мурун электр кубаты өчүрүлгөнүн текшериңиз. Аппаратты жумшак, кургак же бир аз менен сүртүңүз damp cloth. Do not use harsh chemicals or abrasive cleaners, as they may damage the finish or electronic components.
• Объектив: Keep the lens clean to ensure optimal light output and motion sensor performance.

8. Кыйынчылыктарды

If you experience issues with your ECOELER LED ceiling light, refer to the following common problems and solutions:

9. Техникалык шарттар

10. Кепилдик жана колдоо

This ECOELER product is backed by a Limited Warranty. For specific warranty details and duration, please refer to the documentation included with your purchase or contact ECOELER customer support.

For technical assistance, troubleshooting, or warranty claims, please contact ECOELER customer support through the retailer where the product was purchased or visit the official ECOELER webсайт.

Өндүрүүчү: ECOELER ELECTRIC INC