Raynic CR1026A Remote Control User Manual

1. Киришүү

Thank you for choosing the Raynic CR1026A Remote Control. This remote is specifically designed to provide convenient and direct control over your Raynic 10.1 Inches Digital Calendar Clock CR1026. It allows for easy adjustment of settings, including time, screen display, and alarm functions, without needing to physically interact with the clock itself. This manual will guide you through the product's features, setup, operation, and maintenance.

2. Коопсуздук маалыматы

WARNING: CHOKING HAZARD - This product contains a button or coin cell battery. A swallowed button or coin battery can cause Internal Chemical Burns in as little as 2 hours and can lead to death or serious injury if ingested. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.

• Пультту күндүн түз нуруна, жылуулук булактарына же өтө жогорку температурага дуушар кылбаңыз.
• Алыстан башкаруу пультун түшүрүп алуудан же катуу соккуга кабылтуудан алыс болуңуз.
• Пультту ажыратууга же өзгөртүүгө аракет кылбаңыз.
• Пультту суудан жана башка суюктуктардан алыс кармаңыз.

3. Продукт бүтүп калдыview

3.1 Алыстан башкаруунун схемасы

The Raynic CR1026A remote control features a simple and intuitive button layout for easy operation of your digital calendar clock.

Сүрөт 1: Алдыңкы view of the Raynic CR1026A Remote Control. Buttons include Power, Snooze, Alarm Off, Navigation (Up, Down, Left, Right, OK/Confirm), Back, Menu, and Sleep Mode.

3.2 Батарея отсеги

The battery compartment is located on the back of the remote control. It houses the required button cell battery.

2-сүрөт: Артка view of the Raynic CR1026A Remote Control, illustrating the battery compartment with a slide-out tray and a warning label regarding button cell batteries.

4. Орнотуу

4.1 Батареяны орнотуу

1. Алыстан башкаруу пультунун арткы бетиндеги батарея бөлүмүн табыңыз (2-сүрөттү караңыз).
2. Slide the battery tray out in the direction indicated by the arrow.
3. Remove the protective battery sheet if present.
4. Insert one CR2025 3V Nonstandard Battery into the tray with the positive (+) side facing up.
5. Gently slide the battery tray back into the remote control until it clicks securely into place.

4.2 Initial Use (No Pairing Required)

The Raynic CR1026A remote control is designed for direct use with the Raynic 10.1 Inches Digital Calendar Clock CR1026. No pairing or complex programming is required. Once the battery is correctly installed, the remote is ready to control your CR1026 calendar clock immediately.

5. Иштөө нускамалары

Point the remote control directly at your Raynic CR1026 Digital Calendar Clock to ensure proper signal transmission.

• Кубат баскычы: Press to turn the clock display on or off.
• Тындырма баскычы: Activates the snooze function when an alarm is sounding.
• Alarm Off Button: Disables the active alarm.
• Чабыттоо баскычтары (өйдө, ылдый, солго, оңго): Use these arrows to navigate through menus and adjust settings on the clock's display.
• OK/Confirm Button (Center of Navigation): Тандоолорду ырастайт же кошумча менюга кирет.
• Артка баскычы: Мурунку менюга же экранга кайтат.
• Меню баскычы: Accesses the main settings menu of the clock.
• Уйку режиминин баскычы: Activates or deactivates the clock's sleep mode.

5.1 Жалпы операциялар

• Орнотуу убактысы: басыңыз Меню button, navigate to the time settings using the Чабыттоо баскычтары, жана колдонуңуз OK/Ырастоо button to enter. Adjust values with Өйдө/Төмөн жана менен ырастаңыз OK/Ырастоо.
• Turning Off Screen: басыңыз Күч button to toggle the screen display.
• Ойготкучту өчүрүү: Ойготкуч чыкканда, басыңыз Ойготкуч өчүк басуу үчүн баскычты басыңыз.
• Using as Wall Clock: The remote allows you to control the CR1026 calendar clock even when it is hung on a wall, eliminating the need to take it down for adjustments.

6. Техникалык тейлөө

6.1 Батареяны алмаштыруу

When the remote control's responsiveness decreases or it stops functioning, it is likely time to replace the battery. Follow the battery installation steps in Section 4.1 to replace the CR2025 3V battery.

6.2 Тазалоо

Пультту тазалоо үчүн анын бетин жумшак, кургак чүпүрөк менен акырын сүртүңүз. Абразивдүү тазалагычтарды, эриткичтерди колдонбоңуз же пультту сууга салбаңыз.

7. Кыйынчылыктарды

• Пульт жооп бербей жатат:
  • Ensure the remote is pointed directly at the CR1026 clock.
  • Check if the battery is correctly installed and has sufficient power. Replace the battery if necessary.
  • Пульт менен сааттын ортосунда эч кандай тоскоолдук жок экенин текшериңиз.
• Баскычтар иштебейт:
  • Clean the remote's surface to ensure no debris is obstructing the buttons.
  • If individual buttons are unresponsive, the remote may be damaged.
• Remote is damaged:

  If the remote control is physically damaged or ceases to function after troubleshooting, it may need to be replaced. Multiple spare remote controls are compatible with the CR1026 calendar clock.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For information regarding the warranty of your Raynic CR1026A Remote Control, please refer to the documentation provided with your original purchase of the Raynic 10.1 Inches Digital Calendar Clock CR1026, or contact the seller/manufacturer directly. Raynic Electronic is the manufacturer of this product.

For further assistance or technical support, please visit the official Raynic website or contact their customer service department. Ensure you have your product model number (CR1026A) and details of your issue ready when seeking support.