1. Киришүү
The Victron Energy SmartSolar MPPT 150 | 70 - Tr VE.Can is an advanced solar charge controller designed to maximize energy harvest from solar panels and efficiently charge batteries in 12V, 24V, 36V, or 48V systems. Featuring Maximum Power Point Tracking (MPPT) technology, it ensures optimal power conversion even under varying light conditions. Integrated Bluetooth connectivity allows for convenient monitoring and configuration via the VictronConnect app.
Figure 1: Victron Energy SmartSolar MPPT 150 | 70 - Tr VE.Can Solar Charge Controller.
2. Негизги өзгөчөлүктөрү
- Smart Solar Charging: Optimizes solar energy conversion and battery longevity.
- Максималдуу кубаттуулугу: Utilizes fast MPPT and intelligent charge algorithms for peak power, even with partial shading.
- Синхрондоштурулган кубаттоо: Multiple SmartSolar MPPT controllers can synchronize for unified charging stages, enhancing battery life and system efficiency.
- Bluetooth байланышы: Access real-time data, 30-day performance history, configure settings, update firmware, and set alarms via the VictronConnect app.
- Акылдуу жүктөө чыгышы: Directly power devices with configurable voltage thresholds for automatic disconnection if battery voltage өтө төмөн төмөндөйт.
Figure 2: ашыкview of SmartSolar charge controller features.
3. Орнотуу жана орнотуу
3.1 Коопсуздук чаралары
- Бардык туташуулардын бекем жана туура поляризацияланганын текшериңиз.
- Disconnect solar panels and battery before making or breaking connections.
- Install in a well-ventilated area, away from flammable materials.
- Refer to local electrical codes and standards for installation.
3.2 Физикалык байланыштар
- Connect the battery to the 'BATTERY' terminals (+ and -) on the charge controller. Ensure correct polarity.
- Connect the solar panels to the 'PV' terminals (+ and -) on the charge controller. Ensure correct polarity.
- If using the intelligent load output, connect your DC load to the 'LOAD' terminals (+ and -).
Figure 3: Connection points and safety features of the SmartSolar controller.
3.3 VictronConnect App Setup
The VictronConnect app allows for easy monitoring and configuration of your SmartSolar controller. Download the app from your device's app store (available for Android and iOS).
Video 1: Instructions on how to get a readout from an MPPT solar charge controller using a VE.Direct Bluetooth Smart dongle and the VictronConnect app.
- Смартфонуңузда же планшетиңизде Bluetooth иштетилгенин текшериңиз.
- Open the VictronConnect app. The app will scan for Victron products.
- Select your SmartSolar MPPT 150 | 70 from the discovered devices list.
- If prompted, enter the default PIN code (usually '000000' or found on the product label). You can change this PIN in the app settings.
4. Иштөө нускамалары
4.1 Monitoring Performance
Once connected via VictronConnect, you can view real-time data and historical performance. The main screen displays solar power (watts), solar voltage, solar current, battery voltage, battery current, and charger state (Bulk, Absorption, Float).
Video 2: Demonstration of the VictronConnect App for monitoring performance data from the charge controller.
4.2 Орнотууларды тууралоо
The app allows you to customize various settings, including battery type, charge voltages, and load output parameters. Use the settings menu within the app to make adjustments. Always ensure settings are appropriate for your battery type to prevent damage.
Figure 4: The VictronConnect app interface for monitoring and insights.
5. Техникалык тейлөө
- Regularly inspect all wiring and connections for tightness and corrosion.
- Keep the controller clean and free from dust and debris to ensure proper heat dissipation.
- Check for any error codes or warnings displayed in the VictronConnect app.
- Ensure adequate ventilation around the unit, especially the heatsink fins.
6. Кыйынчылыктарды
- Кубат жок/дисплей жок: Check battery connections and ensure the battery is charged. Verify fuses or circuit breakers.
- Low Solar Output: Inspect solar panel connections, check for shading, and ensure panels are clean. Verify solar voltage and current via the app.
- Колдонмонун туташуу маселелери: Ensure Bluetooth is on, the controller is powered, and you are within range. Try restarting the app or your device.
- Батарея заряддалбай жатат: Confirm battery settings in the app match your battery type. Check for any error indicators on the controller or in the app.
For persistent issues, consult the detailed troubleshooting guide available on the Victron Energy webсайтка же кардарларды колдоо менен байланышыңыз.
7. Техникалык шарттар
| Спецификация | Нарк |
|---|---|
| Бренд | VictronEnergy |
| Модель номери | NT-1209 |
| Max PV Voltage | 150V |
| Номиналдуу заряд ток | 70A |
| Батарея Voltage | 12/24/36/48V Auto Select |
| Продукциянын өлчөмдөрү | 3.74 x 9.84 x 7.28 дюйм |
| Элемент Салмагы | 6.82 фунт (3.1 килограмм) |
| Дисплей түрү | LCD (via optional display or app) |
| Материал | Пластик |
Figure 5: Physical dimensions and weight of the SmartSolar controller.
8. Кепилдик жана колдоо
The Victron Energy SmartSolar MPPT controller comes with a standard manufacturer's warranty. For specific warranty details and to register your product, please refer to the official Victron Energy website or contact your authorized dealer. Technical support and additional resources are also available through Victron Energy's customer service channels.
