Introduction
This manual provides detailed instructions for the safe and efficient operation of your Mellif MF15P 20V Portable Dual-Mode Tire Inflator and Air Compressor. This versatile tool is designed for both inflation tasks and powering pneumatic tools, offering cordless convenience and precise pressure control.
Сураныч, биринчи жолу колдонуудан мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.
Коопсуздук нускамалары
Өрт, электр тогуна урунуу жана жеке жаракат алуу коркунучун азайтуу үчүн электр шаймандарын колдонууда ар дайым негизги коопсуздук чараларын сактаңыз.
- Бардык нускамаларды окуңуз: Куралдын иштеши жана мүмкүн болуучу коркунучтар менен таанышыңыз.
- Жакшы желдетилген аймактарда колдонуу: Ensure adequate airflow, especially when operating for extended periods.
- Көздү коргоо: Always wear safety glasses or goggles when operating the inflator.
- Угуу коргоо: Use hearing protection during prolonged operation.
- Балдарды алыс кармаңыз: Do not allow children to operate or play near the inflator.
- Proper Battery Usage: Use only compatible 20V MAX or Mellif 20V batteries. Ensure the battery is fully charged before use. (Battery not included).
- Ашыкча инфляцияны болтурбоо: Do not exceed the recommended pressure for any item being inflated. The auto shut-off feature helps prevent this, but always monitor.
- Колдонуудан мурун текшерүү: Check the inflator, hose, and accessories for damage before each use. Do not operate if damaged.
- Кубатты өчүрүү: Колдонулбай турганда, тейлөө алдында же аксессуарларды алмаштырганда ар дайым батарея топтомун алып салыңыз.
- Сактагыч: Store the inflator in a dry, secure location, out of reach of children.
- Температура: Do not expose the inflator to rain or extreme temperatures.
Пакеттин мазмуну
Төмөндө тизмеленген нерселердин баары пакетиңизге камтылганын текшериңиз:
- Mellif MF15P 20V Cordless Tire Inflator
- Шар ийне адаптери
- Tire Valve Adapter
- Air Bed Adapter
- 3.2ft (100cm) Air Hose for Pneumatic Tools
- Погон
- Колдонуучунун колдонмосу (бул документ)
Note: Battery pack and charger are not included and must be purchased separately.
Продукт өзгөчөлүктөрү
Кош режимде иштөө
- Inflator Mode: Up to 160 PSI (11 BAR / 1100 KPA) for tires, balls, and inflatables.
- Air Tool Mode: Up to 120 PSI (8.2 BAR / 820 KPA) for pneumatic tools like nail guns.
Digital Pressure Gauge & Auto Shut-Off
Large LCD screen displays real-time and preset pressures. Automatically stops inflation when target pressure is reached, preventing over-inflation.
Интегралдык LED жарык
Bright 110 lumen LED light for improved visibility in low-light conditions.
Портативдик дизайн
Compact and lightweight (1.68 kg / 3.7 lbs). Features a stable base, ergonomic handle, and adjustable shoulder strap for easy transport.
Versatile Adapters
Includes multiple nozzles for various inflation needs: ball needle, tire valve, and air bed adapters, plus a dedicated hose for pneumatic tools.
Image: The Mellif MF15P portable tire inflator shown with its included accessories, demonstrating its versatility for inflating car tires, sports balls, inflatable toys, and powering pneumatic tools like nail guns.
Жайгашуу
- Батареяны орнотуу:
Ensure the battery pack (not included) is fully charged. Align the battery pack with the battery port on the inflator and slide it in until it clicks securely into place. To remove, press the battery release button and slide the battery out.
- Ийин боосун бекитүү (милдеттүү эмес):
Attach the included shoulder strap to the designated attachment points on the inflator for easier portability.
- Select and Attach Appropriate Nozzle/Hose:
Depending on your task, choose the correct adapter or hose:
- For tire inflation (cars, bikes, motorcycles), use the built-in hose.
- For sports balls, attach the ball needle adapter to the built-in hose.
- For air beds or other inflatables, attach the air bed adapter to the built-in hose.
- For pneumatic tools, connect the 3.2ft air hose to the inflator's air tool port and then to your pneumatic tool.
Иштөө нускамалары
A. Inflator Mode (for Tires, Balls, Inflatables)
- Түйшүк туташтыруу: Securely attach the appropriate nozzle (built-in hose for tires, or an adapter for balls/inflatables) to the item you wish to inflate.
- Күйгүзүү: Press the power button to turn on the inflator. The LCD screen will illuminate, displaying the current pressure.
- Максаттуу басымды коюу: Use the '+' and '-' buttons to set your desired target pressure. The unit supports PSI, BAR, and KPA. Refer to the item's manufacturer recommendations for correct pressure.
- Инфляциянын башталышы: Инфляцияны баштоо үчүн баштоо баскычын басыңыз. Алдын ала коюлган басымга жеткенде, инфлятор автоматтык түрдө токтойт.
- Монитор басымы: While the auto shut-off is reliable, it is good practice to monitor the inflation process, especially for sensitive items.
- Ажыратуу: Once inflation is complete, disconnect the nozzle from the item.
Image: The Mellif MF15P tire inflator connected to a car tire, demonstrating its capability to inflate to 160 PSI for various vehicles and inflatables.
B. Air Tool Mode (for Pneumatic Tools)
- Аба түтүгүн туташтыруу: Connect the 3.2ft air hose to the inflator's air tool port. Ensure a secure connection.
- Connect to Tool: Attach the other end of the air hose to your pneumatic tool (e.g., nail gun).
- Күйгүзүү: Press the power button. The inflator will operate in air tool mode, providing up to 120 PSI.
- Иштетүү куралы: Use your pneumatic tool as required. The inflator will maintain pressure for continuous operation.
- Өчүрүү: When finished, turn off the inflator and disconnect the air hose from both the inflator and the tool.
Image: The Mellif MF15P air compressor connected to a nail gun, illustrating its use as a portable power source for pneumatic tools.
Image: A person using the Mellif MF15P with a nail gun, highlighting its portability and utility for construction tasks without a heavy compressor.
Image: A visual guide showing compatible tools like staple guns, finish nailers, and brad nailers, and explicitly stating non-recommended uses such as painting, grinding, air dusting, cutting, or heavy truck inflation.
C. LED Light Operation
The built-in LED light can be activated independently by pressing the dedicated light button. Press once for continuous light, and again to turn it off. This is useful for working in dimly lit areas.
Техникалык тейлөө
- Тазалоо: Жарнак менен толтургучтун сыртын сүртүңүзamp кездеме. Катуу химиялык заттарды же абразивдүү тазалагычтарды колдонбоңуз. Ички компоненттерге суу кирбесин текшериңиз.
- Шлангды жана адаптерди текшерүү: Regularly inspect the air hoses and adapters for cracks, kinks, or damage. Replace any damaged parts immediately.
- Сактагыч: Store the inflator in a clean, dry place away from direct sunlight and extreme temperatures. Ensure the battery is removed for long-term storage.
- Батареяга кам көрүү: Follow the battery manufacturer's instructions for charging, storage, and maintenance.
Проблемаларды чечүү
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Инфлятор күйбөйт. |
|
|
| Inflator иштейт, бирок үйлбөйт. |
|
|
| Туура эмес басым окуу. |
|
|
| Инфлятор мөөнөтүнөн мурда токтойт. |
|
|
Техникалык шарттар
| Модель номери | MF15P |
| Бренд | Mellif |
| Power Source | Battery Powered (20V MAX / Mellif 20V batteries) |
| Maximum Pressure (Inflator Mode) | 160 PSI / 11 BAR / 1100 KPA |
| Maximum Pressure (Air Tool Mode) | 120 PSI / 8.2 BAR / 820 KPA |
| Hose Length (Air Tool) | 3.2 фут (100 см) |
| LED жарыктын жарыктыгы | 110 Lumens |
| Элемент Салмагы | 1.68 кг (3.7 фунт) |
| Материал | Пластик |
| Өзгөчөлүктөр | Automatic Shut-Off, Built-In Digital Gauge, Cordless, LCD Display, LED Light |
Сүрөт: ички view of the Mellif MF15P, illustrating its motor design for faster inflation performance.
Image: A visual comparison highlighting the Mellif MF15P as a lightweight and compact compressor compared to traditional heavy air compressors.
Кепилдик жана колдоо
The Mellif MF15P Portable Dual-Mode Tire Inflator and Air Compressor is backed by a 5 жылдык кепилдик сатып алынган күндөн тартып. Бул кепилдик нормалдуу колдонуудагы материалдардагы жана жасалгадагы кемчиликтерди камтыйт.
For warranty claims, technical assistance, or any questions regarding your product, please contact Mellif customer support. Details for contacting support can typically be found on the product packaging or the official Mellif webсайт.
Please have your model number (MF15P) and proof of purchase ready when contacting support.
