JONR ED12 Lite Wet Dry Vacuum Cleaner Instruction Manual

1. Киришүү

Thank you for choosing the JONR ED12 Lite Wet Dry Vacuum Cleaner. This manual provides essential information for the safe and efficient operation, maintenance, and troubleshooting of your new appliance. Please read this manual thoroughly before first use and keep it for future reference.

The JONR ED12 Lite is designed for cleaning sealed hard floors, combining vacuuming and mopping in one step. Its cordless design, self-cleaning function, and anti-tangle technology make floor care convenient and effective.

2. Коопсуздук нускамалары

• Шайманды колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
• Бул колдонмодо сүрөттөлгөндөй гана колдонуңуз. Өндүрүүчү сунуштаган тиркемелерди гана колдонуңуз.
• Шайманды сууга же башка суюктуктарга батырбаңыз.
• Чачты, кенен кийимдерди, манжаларды жана дененин бардык бөлүктөрүн тешиктерден жана кыймылдуу бөлүктөрдөн алыс кармаңыз.
• Бензин сыяктуу күйүүчү же күйүүчү суюктуктарды алуу үчүн колдонбоңуз же алар болушу мүмкүн болгон жерлерде колдонбоңуз.
• Тамеки, ширеңке, ысык күл сыяктуу күйүп жаткан же чылым чеккен нерселерди албаңыз.
• Тепкичтерде тазалоодо өзгөчө этият болуңуз.
• оюнчук катары колдонууга жол бербеңиз. Балдар тарабынан же алардын жанында колдонулганда кылдат көңүл буруу зарыл.
• Use only JONR cleaning solution to prevent damage to the motor and ensure optimal performance.
• Биринчи колдонуудан мурун батареянын толук заряддалганын текшериңиз.

3. Продукциянын компоненттери

The JONR ED12 Lite Wet Dry Vacuum Cleaner comes with the following components:

• ED12 Lite Wet Dry Vacuum Cleaner (Main Body)
• Кубаттуу адаптер
• Тазалоо чечими
• Instructions Manual
• Тазалоочу щетка
• Заряддоо базасы
• Roller Brush (pre-installed)
• Clean Water Tank (750mL)
• Used Water Tank (450mL)

Figure 1: JONR ED12 Lite main unit and included accessories, including the charging base, cleaning solution, and cleaning brush.

4. Ассамблея

Follow these steps to assemble your JONR ED12 Lite:

1. Ролик щеткасын орнотуу: Place the roller brush at the front of the main body. Ensure it clicks securely into place.
2. Таза суу резервуарын орнотуу: Insert the clean water tank into its designated slot on the main body. Screw it securely.
3. Тутканы тиркөө: Insert the handle vertically into the main body until you hear a click, indicating it is locked.
4. Вакуумду заряддоо: Connect the power adapter to the charging base, then plug it into a wall socket. Place the assembled vacuum onto the charging base to charge the battery. The display will indicate charging status.

5. Операция

5.1 Суу резервуарларын толтуруу

The JONR ED12 Lite features a dual-chamber design to separate clean and dirty water.

• Clean Water Tank (750mL): Remove the clean water tank from the main body. Fill it with clean water and add the recommended amount of JONR cleaning solution (approximately 10mL). Securely close the tank and reattach it to the vacuum.
• Used Water Tank (450mL): This tank collects dirty water and debris. It should be emptied and cleaned after each use.

Figure 2: The JONR ED12 Lite features separate clean (750mL) and dirty (450mL) water tanks to ensure cleaning with fresh water.

5.2 Тазалоо режимдери

The vacuum offers two cleaning modes for different needs:

• Стандарттык режим: Ideal for efficient daily cleaning and light messes.
• Көбөйтүү режими: Provides enhanced power for tougher messes, occasional spills, and heavily soiled areas.

Figure 3: Illustration of the two cleaning modes: Auto Mode for general cleaning and Max Mode for stubborn messes.

5.3 Тазалоо

The ED12 Lite is designed to clean up to 0.1 inches from edges, ensuring thorough cleaning along baseboards, corners, and narrow gaps.

Figure 4: The vacuum's design allows for effective cleaning in corners and along skirting boards, reaching within 0.1 inches of edges.

5.4 Self-Propelled Feature

Weighing only 7.7 lbs, the vacuum features a self-propelled function that allows it to glide forward with minimal effort, reducing user fatigue.

Figure 5: The lightweight design and self-propelled feature make the JONR ED12 Lite easy to maneuver and carry, even up stairs.

6. Техникалык тейлөө

6.1 Emptying Dirty Water Tank

After each use, remove the used water tank, pour out the dirty water and debris, and rinse the tank thoroughly with clean water. Ensure the filter is also cleaned.

6.2 Өзүн-өзү тазалоо цикли

Place the vacuum on its charging base. Press the self-cleaning button on the handle to initiate the automatic self-cleaning cycle. The vacuum will clean its roller brush and internal components, then dry the roller with air to prevent odors and bacterial growth.

Figure 6: The vacuum automatically cleans its roller brush and dries it with air when placed on the charging base and the self-cleaning cycle is activated.

6.3 Anti-Tangle Technology

The ED12 Lite features a built-in comb and flat scraper to reduce hair wrap around the roller brush and prevent blockages. Regularly check and clean the roller brush and scraper to maintain optimal performance.

7-сүрөт: Детальдуу view of the anti-tangling design, showing the comb-tooth scraper that helps remove hair from the roller brush during operation.

7. Кыйынчылыктарды

• Кубат жок: Ensure the battery is charged. Check the power adapter and charging base connections.
• Начар соргуч: Check if the used water tank is full and needs emptying. Ensure the roller brush is clean and free of obstructions. Clean the filter.
• Суу агып чыгуу: Verify that both the clean and used water tanks are correctly installed and their caps are securely closed.
• адаттан тыш ызы-чуу: Check the roller brush for any foreign objects or damage. Ensure all components are correctly assembled.

8. Техникалык шарттар

9. Кепилдик жана колдоо

For warranty information, technical support, or to purchase replacement parts, please refer to the warranty card included in your product packaging or visit the official JONR webсайт.