ICY Box IB-1233CL-C Dual Bay SATA HDD/SSD Cloning Station User Manual

Introduction

The ICY Box IB-1233CL-C is a versatile cloning station designed for managing and duplicating SATA 2.5-inch and 3.5-inch hard drives (HDDs) and solid-state drives (SSDs). This device supports offline cloning, allowing you to duplicate drives without a computer connection. Additionally, it functions as an external drive dock via USB 3.0, offering integrated card reader slots for CF and SD cards, and an extra USB 3.0 hub port. This manual provides essential information for setting up, operating, maintaining, and troubleshooting your cloning station.

Кутуда эмне бар

• ICY Box IB-1233CL-C Cloning Station with Card Reader
• Кубаттуу адаптер
• USB 3.0 Кабель
• User Manual

Негизги өзгөчөлүктөрү

• Эки жактуу дизайн: Supports simultaneous use of one 2.5-inch and one 3.5-inch SATA HDD/SSD.
• Standalone Cloning: Perform offline cloning of drives without a computer.
• Интеграцияланган карта окугуч: Features slots for CF and SD memory cards.
• USB 3.0 хабы: Includes an additional USB 3.0 Type-A port for connecting external devices.
• LED абалынын көрсөткүчтөрү: Clear LEDs for power, drive access, and cloning progress (25%, 50%, 75%, 100%).
• Plug & Play: Compatible with Windows, macOS, and Linux operating systems without driver installation.
• Жогорку ылдамдыктагы туташуу: USB 3.0 interface provides data transfer speeds up to 5 Gbit/s.

Жайгашуу

1. Кубат адаптерин туташтыруу

1. Connect the provided power adapter to the DC IN port on the back of the cloning station.
2. Plug the power adapter into a wall outlet. The power LED on the front panel should illuminate.

2. Inserting Drives

The IB-1233CL-C features two drive bays, labeled 'Source' and 'Target' for cloning, or simply 'HDD1' and 'HDD2' for data access.

• Gently slide your 2.5-inch or 3.5-inch SATA HDD/SSD into the appropriate bay until it is firmly seated. Ensure the SATA connectors align correctly.
• For 2.5-inch drives, ensure they are inserted into the smaller slot within the bay.

The ICY Box IB-1233CL-C cloning station shown with a 3.5-inch hard drive and a 2.5-inch solid-state drive inserted into its dual bays.

3. Connecting to a Computer (Optional, for Data Transfer Mode)

1. Connect one end of the supplied USB 3.0 cable to the USB 3.0 port on the back of the cloning station.
2. Connect the other end of the USB 3.0 cable to an available USB port on your computer.
3. Your operating system should automatically detect the drives.

This image visually confirms the cloning station's compatibility with major operating systems: Windows, macOS, and Linux. It also includes a graphic representation of data transfer progress, demonstrating its function as an external drive enclosure.

Иштөө нускамалары

1. Data Transfer Mode (Connected to PC)

When connected to a computer via USB, the IB-1233CL-C functions as a dual-bay external drive enclosure and a multi-card reader/USB hub.

• Ensure the cloning station is powered on and connected to your computer.
• Insert your SATA HDDs/SSDs into the bays.
• Insert CF or SD cards into the front slots.
• Connect USB devices to the front USB 3.0 port.
• The drives, cards, and connected USB devices will appear as removable storage in your operating system. You can now transfer fileар кандай тышкы сактагыч түзмөктөй эле.

The cloning station is positioned on a desk alongside a camera and lenses, illustrating its utility for media professionals. An SD card is partially inserted, and the USB port is visible, emphasizing its integrated card reader and USB hub capabilities.

2. Offline Cloning Mode (Standalone)

This function allows you to clone a source drive to a target drive without connecting to a computer.

1. Дисктерди даярдоо: Ensure both the source and target drives are clean and free of physical damage. The target drive must be equal to or larger in capacity than the source drive.
2. Баштапкы дискти киргизүү: Insert the drive you want to clone (Source Drive) into the bay labeled 'Source' (usually the upper bay or HDD1).
3. Максаттуу дискти киргизүү: Insert the drive you want to clone to (Target Drive) into the bay labeled 'Target' (usually the lower bay or HDD2).
4. Компьютерден ажыратыңыз: Ensure the USB cable is disconnected from the computer. The cloning station must be in standalone mode for offline cloning.
5. Клондоону баштоо: Press and hold the 'Clone' button on the front panel for approximately 3-5 seconds until the cloning progress LEDs (25%, 50%, 75%, 100%) begin to flash.
6. Прогресс мониторинги: The LEDs will light up sequentially to indicate the cloning progress. Each LED represents 25% completion.
7. Клондоо аяктады: Once all four cloning progress LEDs (25%, 50%, 75%, 100%) are solid, the cloning process is complete.
8. Өчүрүү жана алып салуу: Safely power off the cloning station before removing the drives.

Маанилүү: All data on the target drive will be overwritten during the cloning process. Back up any important data from the target drive before proceeding.

Жакын план view from above the cloning station, clearly showing the LED indicators. These LEDs provide visual feedback on the power status, drive activity, and the percentage completion of an offline cloning process.

Техникалык тейлөө

• Тазалоо: Түзмөктүн сыртын тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалоочу каражаттарды же эриткичтерди колдонбоңуз.
• Сактагыч: Аппаратты түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.
• Колдонуу: Аппаратты түшүрүүдөн же катуу таасирлерден сактаныңыз.
• Вентиляция: Ensure the ventilation openings are not blocked during operation to prevent overheating.

Проблемаларды чечүү

• Түзмөк күйбөй жатат:
  Чечим: Ensure the power adapter is securely connected to both the device and a working wall outlet. Try a different outlet if necessary.
• Drives not detected by computer:
  Чечим: Ensure the USB cable is firmly connected to both the cloning station and the computer. Try a different USB port on your computer or a different USB cable. Verify that the drives are properly seated in the bays. For new drives, they may need to be initialized and formatted in Disk Management (Windows) or Disk Utility (macOS).
• Offline cloning fails or does not start:
  Чечим: Ensure the USB cable is disconnected from the computer. Verify that the target drive's capacity is equal to or larger than the source drive's capacity. Ensure both drives are properly seated. Press and hold the 'Clone' button for the required duration (3-5 seconds) until LEDs flash.
• Жай маалымат берүү ылдамдыгы:
  Чечим: Ensure you are using a USB 3.0 port on your computer and the provided USB 3.0 cable. USB 2.0 ports will result in slower speeds. The speed of the drives themselves can also affect transfer rates.
• Card reader not working:
  Чечим: Ensure the memory card is inserted correctly and fully into the appropriate slot. Try a different memory card to rule out card issues.

Техникалык шарттар

Кепилдик жана колдоо

Specific warranty information for the ICY Box IB-1233CL-C is not provided in this manual. For detailed warranty terms, conditions, and technical support, please refer to the official ICY BOX webсайтка же сатуучуга кайрылыңыз. Кепилдик дооматтар үчүн сатып алганыңыздын далилин сактаңыз.