HOTO PixelDrive Electric Screwdriver User Manual

Introduction

This manual provides detailed instructions for the safe and efficient operation, maintenance, and troubleshooting of your HOTO PixelDrive Electric Screwdriver, Model QWLSD014. Please read this manual thoroughly before using the product and retain it for future reference.

Продукт бүттүview

Figure 1: HOTO PixelDrive Electric Screwdriver with included 30-piece bit set and cylindrical storage case.

Негизги өзгөчөлүктөрү:

• Акылдуу дисплей: Shows real-time torque levels and battery charge.
• Жөнгө салынуучу момент: Six levels from 0.5 N·m to 6 N·m for various tasks.
• Кош ылдамдыкты башкаруу: 80 RPM for precision (half-press) and 200 RPM for efficiency (full-press).
• 30 бөлүктөн турган бурамалар топтому: Includes 10 C6.3x25mm and 20 C6.3x50mm bits, organized in a triple-layer cylindrical case.
• Интегралдык LED жарык: 360-degree illumination for dark or confined spaces.
• Кайра заряддалуучу батарея: 2000 mAh Lithium-Ion battery with USB-C charging.

Камтылган компоненттер:

• 1 x HOTO PixelDrive Cordless Screwdriver
• 1 x 30-Piece Screwdriver Bit Set (10 x C6.3x25mm, 20 x C6.3x50mm)
• 1 x USB-C Charging Cable (not explicitly listed but implied by USB-C charging)

2-сүрөт: жарылган view illustrating the screwdriver and its organized bit storage system.

Жайгашуу

1. Charging the Screwdriver:

Before first use, fully charge the HOTO PixelDrive Electric Screwdriver. Connect the provided USB-C cable to the charging port located at the bottom of the screwdriver and plug the other end into a compatible USB power adapter (not included). The smart display will indicate the battery charge status during charging.

Figure 3: The screwdriver features a 2000 mAh battery and a convenient USB-C charging port.

2. Bit Installation:

1. Open the cylindrical bit storage case by rotating the sections.
2. Ишиңизге ылайыктуу бурагычты тандаңыз.
3. Insert the chosen bit into the magnetic bit holder at the tip of the screwdriver. Ensure it is securely seated.

Figure 4: Visual guide for opening the bit cylinder, attaching a bit, and adjusting torque.

Иштөө нускамалары

1. Power On/Off and Torque Adjustment:

• Rotate the ring at the top of the screwdriver to select one of the six torque levels (0.5 N·m to 6 N·m). The smart display will show the selected torque.
• To turn off the screwdriver, rotate the ring to the "OFF" position.

Figure 5: The smart display provides real-time feedback on torque and battery life.

2. Speed Control (Dual Speed):

• The screwdriver features a dual-speed trigger.
• Жарым басуу: Activates the low speed (80 RPM) for precision work.
• Толук пресс: Activates the high speed (200 RPM) for faster operation and increased productivity.

Figure 6: Dual-speed control allows for precise or rapid operation based on trigger pressure.

3. Switching Torque Units (N·m / lb-in):

To switch between Newton-meters (N·m) and Inch-pounds (lb-in) on the smart display, press and hold both the forward and reverse buttons simultaneously for 3 seconds. Wake the screen with a forward/reverse press, then adjust torque.

Figure 7: Instructions for switching between N·m and lb-in torque units on the smart display.

4. Recommended Torque Settings for Various Applications:

Figure 8: Torque level guide for various tasks and compatible bit types.

Техникалык тейлөө

• Keep the screwdriver and bits clean and dry. Wipe with a soft, damp кездеме.
• Store the screwdriver and bits in their original cylindrical case to prevent loss and damage.
• Аппаратты экстремалдык температурага, тике күн нуруна же нымдуулукка дуушар кылуудан алыс болуңуз.
• Regularly check the bits for wear and replace them if they become dull or damaged.

Проблемаларды чечүү

Техникалык шарттар

• Модель аты: QWLSD014
• Бренд: шилтеме
• Материал: Алюминий
• Элемент Салмагы: 11.2 унция (317 грамм)
• Продукциянын өлчөмдөрү: 1.5 x 1.5 x 7.8 дюйм
• Батарея: 1 литий-ион (кошулган), 2000 мАч
• Кубат булагы: Батарея менен иштейт (USB-C кайра заряддалуучу)
• Тtage: 4 вольт
• Момент диапазону: 0.5 - 6 N·m (up to 50 Inch Pounds)
• Ылдамдыгы: Dual-speed (80 RPM / 200 RPM)
• Өзгөчөлүктөр: Adjustable Torque, Dual-Speed Control, LED Light, Smart Display
• Камтылган компоненттер: 1 × PixelDrive Cordless Screwdriver, 30-Piece Screwdriver Bit Set (10 × C6.3 × 25mm, 20 × C6.3 × 50mm)

Коопсуздук маалыматы

• Always wear appropriate safety gear, such as safety glasses, when operating power tools.
• Жумушчу жерди таза жана жакшы жарыктандырыңыз. Башаламан же караңгы жерлер кырсыкка чакырат.
• Жарылуучу чөйрөдө, мисалы, күйүүчү суюктуктар, газдар же чаң бар жерде электр шаймандарын иштетпеңиз.
• Электр шайманын иштетип жатканда балдарды жана жанында тургандарды алыс кармаңыз. Алаксытуулар сизди башкара албай калышы мүмкүн.
• Бош турган электр шаймандарын балдар жетпеген жерде сактаңыз жана электр шайманын же бул нускаманы билбеген адамдарга электр шайманын иштетүүгө жол бербеңиз.
• Use the correct bit for the application. Forcing the tool may cause damage or injury.
• Do not disassemble or modify the screwdriver. Repairs should only be performed by qualified personnel.

Расмий продукт Videos

Кепилдик жана колдоо

For warranty information and customer support, please refer to the official HOTO webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Сатып алуу квитанциясын кепилдик дооматтары үчүн сатып алуунун далили катары сактаңыз.

Manufacturer: HOTO