1. Киришүү
This manual provides essential instructions for the safe and efficient operation, maintenance, and troubleshooting of your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop. This advanced cleaning device combines powerful vacuuming with professional mopping, intelligent navigation, and a convenient self-emptying and mop-cleaning station.
Сураныч, продуктуну колдонуудан мурун бул колдонмону кылдат окуп чыгыңыз жана аны келечекте маалымат үчүн сактап коюңуз.
2. Продукциянын компоненттери
The Cecotec Conga Z100 X-Treme package includes the following items:
- Robot Vacuum and Mop Unit
- Self-Emptying and Mop Cleaning Station
- Кубаттуу адаптер
- Каптал щеткалар (2 даана)
- Main Brush (silicone)
- Bimaterial Mop Pad
- Disposable Dust Bag (pre-installed in station)
- Clean Water Tank (in station)
- Dirty Water Tank (in station)
- Колдонуучунун Колдонмосу (бул документ)
3. Орнотуу
3.1 Таңгактан чыгаруу жана даярдоо
- Бардык компоненттерди таңгактан кылдаттык менен алып салыңыз.
- Remove any protective films, stickers, or foam inserts from the robot and the station.
- 2-бөлүмдө саналып өткөн бардык компоненттердин бар экенин жана бузулбаганын текшериңиз.
3.2 Placing the Self-Emptying and Mop Cleaning Station
- Place the station on a hard, level surface against a wall.
- Ensure there is at least 1 meter (3 feet) of clear space in front of the station and 0.5 meters (1.5 feet) on either side to allow the robot to dock properly.
- Keep the station away from direct sunlight, heat sources, and areas with high humidity.
- Plug the power adapter into the station and then into a wall outlet.
3.3 Таза суу резервуарын толтуруу
- Open the lid of the clean water tank on the station.
- Fill the tank with clean tap water up to the MAX line. Do not use detergents or cleaning solutions not approved by Cecotec.
- Close the tank lid securely.
3.4 Каптал щеткаларды орнотуу
- Роботту тескери буруңуз.
- Align the side brushes with the corresponding posts (L for left, R for right) and press them down until they click into place.
3.5 Алгачкы заряддоо
- Place the robot onto the charging contacts of the station. Ensure the charging contacts on both the robot and the station are aligned.
- The robot will begin charging automatically. Allow it to fully charge before its first use (approximately 4-6 hours).
3.6 Mobile Application Connection
- Download the official Cecotec Conga app from your smartphone's app store.
- Follow the in-app instructions to register an account and connect your Conga Z100 X-Treme robot. This typically involves connecting to the robot's Wi-Fi network during the setup process.
4. Иштөө нускамалары
4.1 Күйгүзүү/өчүрүү
- Күйгүзүү: Press and hold the power button on the robot until the indicator lights illuminate.
- Өчүрүү: Индикатор жарыктары өчкөнгө чейин кубат баскычын басып, кармап туруңуз.
4.2 Тазалоо циклин баштоо
- Ensure the robot is fully charged and the clean water tank is filled (for mopping).
- Press the clean button on the robot or use the mobile app to start a cleaning cycle. The robot will automatically leave the station and begin cleaning.
- To pause cleaning, press the clean button once. Press again to resume.
- To send the robot back to the station, press the home button on the robot or use the app.
4.3 Тазалоо режимдери
The robot offers various cleaning modes accessible via the mobile application:
- Авто режим: Робот картага түшүрүлгөн аймакты акылдуу түрдө тазалайт.
- Spot режими: Cleans a specific small area with concentrated effort.
- Edge режими: Дубалдарды жана эмеректердин четтерин тазалайт.
- Аймакты тазалоо: Картада тазалоо үчүн белгилүү бир аймактарды аныктоого мүмкүндүк берет.
4.4 AI Navigation and Obstacle Avoidance
The Conga Z100 X-Treme utilizes AI with LaserEye technology for precise navigation. It identifies small objects, different floor types, and dirt levels, adapting its cleaning strategy accordingly. This allows it to navigate complex environments and avoid obstacles effectively.
4.5 AquaCycle Professional Mopping
The AquaCycle system ensures continuous mopping with clean water. The robot wets the bimaterial mop with clean water and wrings out dirty water into a separate tank, providing efficient and hygienic floor cleaning.
4.6 Wet&Protect Technology
The robot's intelligent mopping adapts to different surfaces. Its bimaterial mop provides deep cleaning with a super-absorbent side. When a carpet is detected, the robot activates CarpetCare mode and uses the smooth side of the mop to protect the carpet from moisture.
4.7 Соруу күчү
With an Ungravity motor providing 20000 Pa of suction power, the robot effectively cleans hidden dirt, even from high-pile carpets and deep tile grout.
5. Техникалык тейлөө
Regular maintenance ensures optimal performance and extends the lifespan of your robot vacuum and mop.
5.1 Self-Emptying Station Maintenance
- Чаң баштыгын алмаштыруу: The station automatically empties the robot's dust bin into a disposable dust bag. Replace the dust bag when the indicator light on the station signals it is full (approximately every 12 weeks, depending on usage).
- Таза суу резервуары: Refill with clean water before each mopping cycle.
- Кир суу багы: Empty and rinse the dirty water tank after each mopping cycle to prevent odors and bacterial growth.
- Швабра менен кургатуу: The station dries the mop with hot air after cleaning. Ensure the mop is properly positioned for effective drying.
5.2 Роботтун компоненттерин тазалоо
- Негизги щетка: Regularly remove hair and debris from the main silicone brush. Use the cleaning tool provided.
- Каптал щеткалар: Check for tangled hair or debris and clean as needed. Replace if worn or damaged.
- Bimaterial Mop Pad: Remove the mop pad after each mopping cycle and wash it thoroughly. It can be hand-washed or machine-washed (follow care instructions).
- Сенсорлор: Wipe the cliff sensors, wall sensors, and charging contacts with a clean, dry cloth to ensure proper function.
- Дөңгөлөктөр: Clean any hair or debris from the robot's wheels.
6. Кыйынчылыктарды
If you encounter issues with your Conga Z100 X-Treme, refer to the following common problems and solutions:
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Робот күйбөйт. | Аз батарея; кубат баскычы туура басылган жок. | Place robot on charging station; press and hold power button for 3 seconds. |
| Робот заряддоо станциясын таба албайт. | Station obstructed; robot too far from station. | Ensure clear space around station; manually place robot closer to station. |
| Начар тазалоо көрсөткүчү. | Brushes or filters dirty/worn; dust bin full. | Clean/replace brushes and filters; empty dust bin. |
| Робот бат-баттан тыгылып калат. | Тоскоолдуктар (кабелдер, майда буюмдар); тегиз эмес беттер. | Clear the cleaning area of obstacles; use virtual walls/no-go zones in app. |
| Колдонмонун туташуу маселелери. | Incorrect Wi-Fi password; router too far; app outdated. | Verify Wi-Fi credentials; move robot closer to router; update app; reset robot's Wi-Fi. |
| Жалбырактарды сүртүү натыйжасыз же чийик калтырат. | Mop pad dirty/worn; clean water tank empty; dirty water tank full. | Clean/replace mop pad; refill clean water tank; empty dirty water tank. |
| Суу насосунун катасы. | Pump malfunction; blockage in water lines. | Check for blockages; contact customer support if issue persists. |
For persistent issues not covered here, please refer to the official Cecotec support channels.
7. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Cecotec |
| Модель аты | Conga Z100 X-Treme |
| Модель номери | A01_EU01_119672 |
| Соруу күчү | 20000 Па |
| Батарея сыйымдуулугу | 5200 мАч |
| Навигация технологиясы | AI with LaserEye |
| Моппинг системасы | AquaCycle Professional Mopping, Wet&Protect Technology, Bimaterial XXL Mop |
| Өзүн-өзү тазалоочу станция | Yes, with hot air mop drying |
| Чаң баштык сыйымдуулугу | 3 литр |
| Таза суу резервуарынын кубаттуулугу | 3 литр |
| Кир суу резервуарынын сыйымдуулугу | 3 литр |
| Роботтун өлчөмдөрү (У x Т x Б) | 35.2 x 35.2 x 10.5 см |
| Робот Салмагы | 4.92 кг |
| Тtage | 240 вольт |
| Башкаруу түрү | Колдонмо башкаруу |
8. Кепилдик жана колдоо
Your Cecotec Conga Z100 X-Treme Robot Vacuum and Mop is covered by a manufacturer's warranty. Please refer to the warranty card included in your product packaging for specific terms and conditions, including the warranty period and coverage details.
For technical support, service, or to inquire about replacement parts and consumables, please contact Cecotec customer service through their official webсайтты же кепилдик документтериңизде көрсөтүлгөн байланыш маалыматын.
Always ensure you have your product model number (A01_EU01_119672) and proof of purchase available when contacting support.
