Enbrighten Ultrabrite Hexagon Garage Lights (Model 85837) Instruction Manual

Introduction

The Enbrighten Ultrabrite Hexagon Garage Lights provide customizable, high-output LED lighting for various spaces. This modular light kit is ETL safety certified and designed for straightforward installation. It offers multiple power options and brightness settings controlled by a portable RF remote or in-wall switch.

This manual provides detailed instructions for the safe and proper installation, operation, and maintenance of your Enbrighten Ultrabrite Hexagon Garage Lights.

Кутуда эмне бар

The Enbrighten Ultrabrite Hexagon Garage Lights kit includes the following components:

• 24 Light Bars
• Patent-Pending Snap-in Connectors (various types)
• Self-Anchoring Screws
• Portable Remote with Wall Mount and Magnet
• Direct-Wire Adapter
• Plug-in Cord
• E26 базалык адаптери

Figure 1: All components included in the Enbrighten Ultrabrite Hexagon Garage Lights kit.

Орнотуу жана орнотуу

Follow these steps for proper installation of your hexagon lights. It is recommended to assemble and install one hexagon at a time.

1. Макетиңизди пландаштыруу

Before connecting to power, lay out the light bars on the floor to visualize your desired configuration and ensure adequate space for your design. The modular design allows for various patterns.

2-сүрөт: Мисamples of custom hexagon light configurations.

2. Assembling Hexagons

1. Connect the light bars using the provided snap-in connectors. Ensure each connection clicks securely into place.
2. If your layout includes incomplete hexagons (ends of light bars not connected to another bar), attach a light bar end cap or connector end cap to finish the segment.

3. Жарыктарды орнотуу

The lights can be mounted to drywall or wood surfaces using the self-anchoring screws. Preinstalled double-sided 3M tape on the connectors provides temporary support during installation.

1. Remove the backing from the double-sided tape on the connectors.
2. Firmly press the assembled hexagon onto a clean, dry surface in your desired location.
3. Secure the lights by driving the self-anchoring screws through the mounting holes on the connectors. These screws do not require pilot holes or drywall anchors when installed in sheetrock or solid wood.
4. Align the optional keyhole covers with the screw heads and push them into place for a finished look.

Figure 3: Installation details including self-anchoring screws and snap-in connectors.

4. Кубат параметрлери

The Enbrighten Ultrabrite Hexagon Garage Lights offer three power options:

• Plug-in шнур: Connect the plug-in cord to the remote receiver and then to a standard indoor outlet.
• E26 Base Adapter: Turn off power to the light fixture at the circuit breaker. Remove the existing light bulb and screw in the E26 adapter. Plug the light's cord into the adapter.
• Direct-Wire Adapter: This option requires basic electrical wiring knowledge. Turn off power at the circuit breaker or fuse box. Connect the white neutral wire from the junction box to the ribbed wire of the direct-wire adapter using a wire nut. Secure the black hot wire from the junction box to the smooth wire of the direct-wire adapter using a wire nut. Neatly push all wires into the junction box and install a blank cover (sold separately).

Important: Do not connect to power until installation is complete for safety.

Иштөө нускамалары

Your Enbrighten Ultrabrite Hexagon Garage Lights can be operated using the included RF remote or a standard in-wall light switch.

Алыстан башкаруу операциясы

The portable RF remote allows you to turn the lights on/off and adjust brightness. The remote may need to be paired before first use.

1. Пультти жупташтыруу: Within 3 seconds of powering the lights (turning on the circuit breaker or plugging in), press the 'ON' button on the remote for 3 seconds. The lights will blink to indicate successful pairing.
2. Күйгүзүү/өчүрүү: Press the 'ON' or 'OFF' buttons on the remote to control the lights.
3. алсыздатуу: Press the 'DIMMING' button to cycle through the three brightness settings. Pause briefly between presses to ensure brightness changes for all light bars.
4. Кайтаруу: If light bars are not at the same brightness, press the 'RESET' button to return all lights to the highest brightness setting.

Figure 4: Portable remote control for the hexagon lights.

Дубалды которуу операциясы

If connected to an in-wall switch or switch-controlled outlet, the light bars will turn on and off like traditional fixtures. Note that these lights are not compatible with standard in-wall dimmers.

• To adjust brightness without the remote, cycle the switch from OFF to ON, then OFF to ON again within 2 to 5 seconds.
• To reset all light bars to 100% brightness, cycle the switch from OFF to ON, then OFF to ON again within 1 second.

Техникалык тейлөө

The Enbrighten Ultrabrite Hexagon Garage Lights require minimal maintenance. Ensure the power is off before cleaning.

• Wipe the light bars and connectors with a soft, dry cloth.
• Do not use abrasive cleaners or solvents, as these may damage the finish or electrical components.
• Regularly check connections to ensure they remain secure.

Проблемаларды чечүү

If you encounter issues with your Enbrighten Ultrabrite Hexagon Garage Lights, refer to the following common solutions:

• Жарыктар күйбөйт: Ensure all power connections are secure and the circuit breaker is on. If using the remote, ensure it is paired correctly (see Remote Control Operation).
• Lights not responding to remote: Re-pair the remote as described in the Remote Control Operation section. Check the remote's battery.
• Uneven brightness: Use the 'RESET' button on the remote or cycle the wall switch (OFF > ON > OFF > ON within 1 second) to synchronize brightness levels.
• Бошоң байланыштар: Verify that all light bars are firmly snapped into their connectors and that mounting screws are tight.

Техникалык шарттар

Кепилдик маалымат

Бул продукт менен келет 5 жылдык чектелген кепилдикТолук шарттар жана эрежелер менен таанышуу үчүн сатып алууңузга тиркелген кепилдик документтерин караңыз.

Колдоо

For further assistance or more information, U.S.-based Consumer Care is available Monday through Friday. Please refer to the contact information provided in your product manual for details.