1. Киришүү
This manual provides essential information for the safe and efficient operation of your Anern 60A PWM Solar Charge Controller. This device is designed to manage power flow from your solar panels to your battery bank, ensuring optimal charging and protection. Please read this manual thoroughly before installation and use.
Сүрөт 1.1: Алдыңкы view of the Anern 60A PWM Solar Charge Controller.
2. Коопсуздук маалыматы
- Ensure all connections are correct and secure before operation. Incorrect wiring can damage the controller and connected devices.
- Always connect the battery to the charge controller FIRST, then the solar panel, and finally the load. When disconnecting, reverse this order: disconnect the solar panel, then the load, then the battery.
- This controller is designed for 12V/24V lead-acid batteries (OPEN, AGM, GEL). It is NOT suitable for Ni-MH, Lithium, or other battery types unless explicitly stated in the settings.
- Install the controller in a well-ventilated area, away from flammable materials and moisture.
- Avoid short circuits. Ensure all wires are properly insulated and terminals are tightened.
- Контроллерди өз алдынча бөлүктөргө бөлүүгө же оңдоого аракет кылбаңыз. Тейлөө үчүн квалификациялуу адистерге кайрылыңыз.
3. Продукциянын өзгөчөлүктөрү
- 60A PWM Controller: Full 3-stage PWM management (direct charge, boost charge, float charge) for enhanced system efficiency and extended battery life.
- Көптөгөн коргоо: Built-in overcurrent/overload, open circuit, and reverse polarity protection. All protections are self-recovering.
- Functional LCD Display: Clear display shows status and data, allowing mode switching and parameter configuration.
- Батарея шайкештиги: Suitable for 12V/24V lead-acid batteries (OPEN, AGM, GEL).
- Кош USB порттары: Two 5V/2A USB ports for charging mobile phones and other 5V devices.
- Автоматтык идентификация: Automatically recognizes 12V or 24V system voltage.
Image 3.1: Visual representation of the multiple security features including overvoltage, overcurrent, high temperature, time control, automatic identification, and connection reversal protection.
4. Пакеттин мазмуну
Пакетти ачкандан кийин, бардык буюмдар бар экенин жана бузулбаганын текшериңиз:
- Anern 60A PWM Solar Charge Controller
- Колдонуучунун Колдонмосу (бул документ)
5. Орнотуу жана орнотуу
Follow these steps carefully to ensure proper and safe installation of your solar charge controller.
5.1. Connection Order
- Батареяны туташтыруу: Connect the battery to the charge controller first. Ensure correct polarity (+ to + and - to -).
- Күн панелин туташтыруу: Connect the solar panel to the charge controller. Ensure correct polarity.
- Жүктү туташтыруу: Connect your DC load (e.g., lights, 5V USB devices) to the charge controller. Ensure correct polarity.
WARNING: Always follow the connection order (Battery > Solar Panel > Load) and disconnection order (Solar Panel > Load > Battery) to prevent damage to the controller.
5.2. Электр схемасы
Image 5.1: Diagram illustrating the correct connection sequence for the battery, solar panels, and optional AC load/inverter.
5.3. Орнотуу боюнча кеңештер
- Use appropriate wire gauges for your system's current. The controller supports up to 12-gauge wires.
- Ensure all wire connections are tight and secure using a small screwdriver.
- Insulate any bare wire ends with electrical tape to prevent accidental shorts.
5.4. Орнотуу боюнча видео көрсөтмө
Video 5.1: A seller-provided video demonstrating the installation process of a solar charge controller, including wiring connections.
Video 5.2: A seller-provided video illustrating the connection method for a solar charge controller, emphasizing the correct sequence.
6. Иштөө нускамалары
The Anern 60A PWM Solar Charge Controller features an intuitive LCD display and three buttons for easy operation.
6.1. LCD дисплейview
Сүрөт 6.1: Детальдуу view of the LCD display area, voltage symbol, HR, panels, five-battery level indicator, load identification, charging logo, and output identification. Also shows the MENU, UP, and DOWN/HM buttons.
- Санариптик дисплей аянты: Shows various parameters like voltage, current, and settings.
- Тtage Белги: том көрсөтөтtagэ окуулар.
- HR: Timer setting for load control.
- Панелдер: Күн панелинин активдүүлүгүн көрсөтөт.
- Five Battery Level Indicator: Учурдагы батареянын заряд деңгээлин көрсөтөт.
- Load Identification: Indicates if a load is connected and active.
- Charging Logo: Continuous lighting for direct charging/charging, slow flashing for floating loading.
- Output Identification: Indicates load output status.
6.2. Баскыч функциялары
- MENU баскычы: Press to browse different interfaces. Press and hold for five seconds to enter or exit parameter settings.
- UP баскычы: Press to increase the value during parameter settings.
- DOWN/HM Button: Press to decrease the value during parameter settings.
6.3. Параметрлердин Орнотуулары
To configure parameters, navigate through the display interfaces using the MENU button. When on the desired parameter screen (e.g., battery type, float voltage), press and hold the MENU button for five seconds to enter the setting mode. The number will flash, allowing adjustment with the UP and DOWN buttons. Press and hold MENU again for five seconds to save and exit.
Image 6.2: Flowchart showing how to browse interfaces and set parameters, including main display, floating voltage, discharge arrest, battery type, working methods, and reconnecting discharge.
- Демейки жөндөөлөр: The controller comes with factory default settings for charging and discharging. You can restore these by pressing and holding the UP button for five seconds on interfaces 2-5.
- Батарея түрү: Select the correct battery type (e.g., GEL, AGM, OPEN) to ensure proper charging algorithms.
- Float Voltage: Томtage at which the battery is maintained after being fully charged.
- Зарядды кайра туташтыруу: Томtage at which the load will reconnect after being disconnected due to low battery.
- Агызып токтотуу: Томtage at which the load will disconnect to protect the battery from over-discharge.
- Иш ыкмалары: Configure load control modes (e.g., 24H for continuous operation, timer settings).
6.4. Кош USB порттору
The controller is equipped with two 5V/2A USB ports, allowing you to charge compatible mobile phones and other 5V devices directly from the controller.
7. Техникалык тейлөө
- Бардык зымдардын туташууларынын бекемдигин жана коррозияга туруктуулугун үзгүлтүксүз текшерип туруңуз.
- Keep the controller clean and free from dust and debris.
- Ашыкча ысып кетүүнүн алдын алуу үчүн контроллердин айланасында жетиштүү желдетүүнү камсыз кылыңыз.
- Monitor the LCD display periodically to ensure correct operation and parameter settings.
8. Кыйынчылыктарды
| Кырдаал | Болжолдуу себеп | Чечим |
|---|---|---|
| Charge not on or load not on when sunny | Solar panel open or reversed | Байланыштарды текшерүү |
| Load not on when sunny | Режим туура эмес коюлган | Кайра коюу |
| Load not on when sunny | Батарея аз | Заряддоо |
| Жүктөө сөлөкөтү жай күйүп турат | Кыска туташуулардан коргоо | Remove load |
| Өчүрүү | Батареянын көлөмү азtage | Батареяны кайра заряддаңыз |
9. Техникалык шарттар
- Модел: 60A PWM Күн зарядын контролдоочу
- Rated Voltage: 12V / 24V Auto
- Номиналдуу ток: 60A
- Макс. PV Voltage: 50V
- Макс. PV киргизүү күчү: 780 Вт (24 В) / 390 Вт (12 В)
- Материал: Акрилонитрил бутадиен стирол (ABS)
- Дисплей түрү: LCD
- Продукциянын өлчөмдөрү: 7.09 x 1.77 x 3.54 дюйм
- Элемент Салмагы: 13.4 унция
- Камтылган компоненттер: PWM Күн контроллери
10. Кепилдик жана колдоо
For warranty information or technical support, please refer to the product packaging or contact Anern customer service directly. Keep your purchase receipt for warranty claims.
