1. Киришүү
This manual provides essential information for the safe and efficient operation of your FLSUN S1 3D Printer. The FLSUN S1 is an advanced delta-type FDM 3D printer designed for high-speed and precise printing. It features a fully enclosed structure, AI-assisted functions, and broad material compatibility. Please read this manual thoroughly before using the printer.
Сүрөт 1: Алдыңкы view of the FLSUN S1 3D Printer, showcasing its sleek, enclosed design and user interface.
2. Коопсуздук маалыматы
Принтерге зыян келтирбөө же жаракат алып калбоо үчүн ар дайым төмөнкү коопсуздук чараларын сактаңыз:
- Принтер туруктуу, түз бетке коюлганын текшериңиз.
- Принтерди жакшы желдетилген жерде иштетиңиз.
- Иштеп жатканда форсункага же жылытылган катмарга тийбеңиз, анткени алар жогорку температурага жетет.
- Иштеп жатканда балдарды жана үй жаныбарларын принтерден алыс кармаңыз.
- Принтер менен кошо берилген кубат адаптерин гана колдонуңуз.
- The FLSUN S1 features a closed structure and dual filtration system to optimize air quality during printing, blocking 99% of particulate matter and volatile organic compounds. However, proper ventilation is still recommended.
- Кандайдыр бир техникалык тейлөө же тазалоодон мурун принтерди сууруп алыңыз.
3. Пакеттин мазмуну
Пакетте бардык буюмдар бар экенин текшериңиз:
- FLSUN S1 3D Printer
- Электр кабели
- Колдонуучунун Колдонмосу (бул документ)
- Tool Kit (includes necessary tools for assembly and maintenance)
- Sample Filament
4. Орнотуу
The FLSUN S1 is designed for quick setup, allowing you to begin printing in approximately 10 minutes from unboxing.
- Пакеттен чыгаруу: Принтерди жана бардык аксессуарларды таңгактан этияттык менен алып салыңыз. Таңгакты келечекте ташуу же сактоо үчүн сактаңыз.
- Жайгашкан жери: Place the printer on a stable, level surface with adequate space around it for ventilation and access.
- Кубат туташуу: Connect the power cable to the printer and then to a grounded power outlet.
- Баштапкы күйгүзүү: Turn on the printer using the power switch. Follow the on-screen prompts for initial setup.
- Автоматтык тегиздөө: The FLSUN S1 features fully automatic bed leveling. Initiate the auto-leveling process via the touchscreen interface as prompted during initial setup or from the settings menu.
Figure 2: The FLSUN S1's touchscreen interface showing the one-button automatic leveling function and an indicator for automatic material shortage эскертүү.
- Filament жүктөө: Load your chosen filament into the designated slot. The direct drive extruder system will guide the filament. Refer to the on-screen instructions for proper loading.
Figure 3: Illustration of the FLSUN S1's fully enclosed delta structure, highlighting the cylindrical build volume with a diameter of 320mm and height of 430mm.
5. Иштөө нускамалары
The FLSUN S1 is designed for high-speed and precise 3D printing.
5.1 Басып чыгаруу процесси
- Моделди даярдоо: Use a compatible slicing software to prepare your 3D model (.STL, .OBJ, etc.) and generate a G-code file.
- Transfer G-code: Transfer the G-code file to the printer via USB or network connection.
- Select and Start Print: On the printer's touchscreen, select your G-code file and initiate the print. The printer will automatically preheat the nozzle and bed to the required temperatures.
- Мониторду басып чыгаруу: Monitor the printing process. The built-in AI Camera can self-optimize print quality and proactively alert you to potential issues. Remote monitoring is also available.
- Убактылуу сүрөткө тартуу: The AI Camera can capture time-lapse videos of your prints.
Figure 4: The FLSUN S1 offers remote monitoring capabilities via a computer interface and time-lapse photography, allowing users to record and share their printing process.
5.2 Жогорку ылдамдыктагы басып чыгаруу
The FLSUN S1 is capable of ultra-high-speed printing with a maximum print speed of 1200 mm/s and an acceleration of 40,000 mm/s². This is achieved through its advanced delta-type 3D printing technology and optimized algorithms.
Figure 5: Visual representation of the FLSUN S1's high-speed printing specifications, including a maximum flow rate of 110mm³/s, maximum print speed of 1200mm/s, and maximum acceleration of 40,000mm/s².
5.3 Материалдык шайкештик
The FLSUN S1 supports a wide range of filament types due to its robust full-metal direct extruder, which can reach temperatures up to 350°C, and a heated bed up to 120°C. The chamber temperature can reach up to 50°C.
- Колдоого алынган материалдар: PLA, ABS, PETG, ASA, TPU, PVA, PET, PA, PC, and Carbon materials.
Figure 6: Diagram illustrating the FLSUN S1's temperature capabilities for multi-filament printing, showing a 350°C nozzle temperature, 50°C chamber temperature, and 120°C hot bed temperature.
5.4 Өркүндөтүлгөн функциялар
- Closed-Loop Motors: Real-time position monitoring automatically adjusts to detect and correct lost steps, ensuring print accuracy.
- Вибрацияны компенсациялоо: Optimized algorithms minimize vibration, ensuring print accuracy and preventing surface roughness and deformation.
- CPAP High-Pressure Turbo Fan: A fan with a wind speed of 40,000 rpm automatically adjusts its speed based on printing requirements to ensure optimal cooling and material melting, supporting high-temperature printing up to 350°C.
Figure 7: Demonstrates the effect of closed-loop motors in correcting print errors ("Before" and "After" images of a square print) and the effectiveness of vibration compensation ("OFF" and "ON" images showing print quality improvement).
6. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө сиздин FLSUN S1 3D принтериңиздин узак мөөнөттүү иштешин жана оптималдуу иштешин камсыз кылат.
- Тазалоо: Regularly clean the print bed, nozzle, and interior of the printer to remove any filament debris or dust. Use a soft cloth and appropriate cleaning solutions.
- Фильтрация системасы: The dual filtration system helps maintain air quality. Check and replace the filters periodically as recommended by FLSUN to ensure effective removal of particulate matter and VOCs.
- Майлоо: Apply lubricant to moving parts (e.g., linear rails) as specified in the detailed maintenance guide (if provided separately by FLSUN).
- Программалык камсыздоонун жаңыртуулары: Keep the printer's firmware updated to benefit from performance improvements and new features. Check the official FLSUN webакыркы жаңыртуулар үчүн сайт.
7. Кыйынчылыктарды
This section addresses common issues you might encounter. For more complex problems, refer to the FLSUN support resources.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Басма төшөккө жабышпайт | Bed not level, incorrect bed temperature, dirty print surface. | Perform automatic bed leveling. Adjust bed temperature in slicing software. Clean the print surface with isopropyl alcohol. |
| Жипче экструзияланбайт | Nozzle clogged, filament tangled, incorrect nozzle temperature. | Clear nozzle clog. Ensure filament spool is free. Verify nozzle temperature is appropriate for the filament type. Check for material shortage эскертүү. |
| Poor print quality (layer shifts, rough surfaces) | Vibrations, incorrect print speed, mechanical issues. | Ensure printer is on a stable surface. The S1's vibration compensation should mitigate this; if not, check for loose components. Adjust print speed. The AI Camera may alert to issues. |
| Принтер күйбөй жатат | Power cable disconnected, faulty power outlet. | Check power cable connections. Test power outlet with another device. |
8. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модел | FLSUN S1 |
| Басма технологиясы | FDM (Fused Deposition Modeling) Delta |
| Build Volume | 12.6 x 12.6 x 16.9 inches (320mm diameter x 430mm height) |
| Макс басып чыгаруу ылдамдыгы | 1200 мм/с |
| Макс ылдамдатуу | 40,000 мм/кв |
| Экструдер түрү | Dual-Gear Direct Drive, Full-Metal |
| Соплолордун максималдуу температурасы | 350°C |
| Max Hot Bed Temperature | 120°C |
| Камера температурасы | 50°Сге чейин |
| Колдоого алынган жипчелер | PLA, ABS, PETG, ASA, TPU, PVA, PET, PA, PC, Carbon materials |
| Тегиздөө | Толугу менен автоматтык |
| AI өзгөчөлүктөрү | AI Camera for print quality optimization, issue alerts, time-lapse photography |
| Аба чыпкалоо | Dual filtration system (blocks 99% particulate matter and VOCs) |
| Продукциянын өлчөмдөрү | 21.6"D x 23.4"W x 40.5"H (54.9 x 59.4 x 102.9 см) |
| Элемент Салмагы | 90.4 фунт (41 кг) |
| Материал | Металл |
| Түс | Кара |
9. Кепилдик жана колдоо
FLSUN provides comprehensive support for the S1 3D Printer.
- Кепилдик: FLSUN offers a 12-month after-sales service for the FLSUN S1 3D Printer.
- Техникалык колдоо: For any questions or support needs regarding the product, please contact FLSUN via Amazon. Support inquiries will be responded to within 24 hours.
- Онлайн ресурстар: Visit the official FLSUN website for additional resources, FAQs, and firmware updates.
