isinwheel M10 электр велосипединин контроллери колдонуучунун колдонмосу

1. Киришүү

This manual provides essential instructions for the proper installation, operation, and maintenance of your isinwheel Electric Bike Controller, designed for the M10 electric bike model. Please read this manual thoroughly before installation and use to ensure safe and efficient performance of your electric bicycle.

2. Коопсуздук маалыматы

• Always disconnect the battery before performing any installation, maintenance, or repair work on the controller or electric bike system.
• Кыска туташуунун алдын алуу үчүн бардык туташуулардын коопсуз жана туура изоляцияланганын текшериңиз.
• Avoid exposing the controller to water, extreme temperatures, or direct sunlight for prolonged periods.
• If you are unsure about any installation steps, consult a qualified electric bike technician.
• Контроллерди ачууга же өзгөртүүгө аракет кылбаңызasing, as this will void the warranty and may cause damage or injury.

3. Пакеттин мазмуну

• 1 x isinwheel Electric Bike Controller (Model GLX-M0003US-)

4. Техникалык шарттар

5. Орнотуу жана орнотуу

The isinwheel Electric Bike Controller is designed for integration into the M10 electric bike system. Proper installation is crucial for functionality and safety. It is highly recommended that installation be performed by an experienced technician.

5.1 General Connection Overview

The controller manages power distribution from the battery to the motor and other components. It typically connects to:

• Батарея: Main power input. Ensure correct polarity.
• Мотор: Output for motor power and phase signals.
• Дисплей/Башкаруу панели: For user interface, speed settings, and system monitoring.
• Муунткуч: Input for speed control.
• Pedal Assist Sensor (PAS): Input for pedal assistance.
• Тормоз рычагдары: Input for motor cut-off during braking.

Refer to the wiring diagram provided with your M10 electric bike for specific connection points and wire colors. Ensure all connectors are fully seated and secured.

1-сүрөт: The isinwheel Electric Bike Controller, showing its aluminum casing with specifications printed on it and various colored wire connectors extending from one end. The specifications visible include 'Brushless Motor Controller', 'Battery Voltage: 36V', 'Cutoff Voltage: 29V', 'Current Limit: 15A', 'Mode: GLX-M0003US-', and 'Number: 240122'. A yellow XT60-style connector is also visible among the wires.

5.2 Контроллерди орнотуу

Mount the controller in a secure, dry location on the bicycle frame, away from direct impact zones and excessive vibration. Ensure adequate airflow around the controller for heat dissipation. Use appropriate fasteners to secure it firmly.

6. Иштөө нускамалары

Once the controller is correctly installed and all connections are verified, the electric bike system can be operated via the bike's display or control panel.

• Күйгүзүү/өчүрүү: Use the power button on your electric bike's display unit to turn the system on or off. The controller will activate upon power-on.
• Ылдамдыкты көзөмөлдөө: Adjust the speed or power assist level using the controls on your display unit or by engaging the throttle (if installed).
• Педаль жардамчысы: The controller will engage motor assistance based on your pedaling input from the PAS sensor.
• Тормоздоо: The controller will cut off motor power when the brake levers are engaged, ensuring safe stopping.

Always operate your electric bike responsibly and in accordance with local regulations.

7. Техникалык тейлөө

Regular maintenance helps ensure the longevity and reliable performance of your controller.

• Тазалоо: Keep the controller clean and free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning. Do not use harsh chemicals or abrasive materials.
• Туташуу текшерүүлөрү: Periodically inspect all wire connections to ensure they are secure and free from corrosion or damage.
• Курчап турган чөйрөнү коргоо: Avoid storing or operating the electric bike in conditions of extreme humidity or temperature fluctuations.
• Зыянды текшерүү: Regularly check the controller casing for any signs of physical damage.

8. Кыйынчылыктарды

If you encounter issues with your electric bike's electrical system, consider the following basic troubleshooting steps:

• Кубат жок:
  • Батарея заряддалганын жана туура туташтырылганын текшериңиз.
  • Verify that the main power switch on the battery or display is turned on.
  • Inspect all power cables for visible damage or loose connections.
• Мотор жооп бербейт:
  • Ensure the throttle or pedal assist sensor is correctly connected and functioning.
  • Check motor phase wires and Hall sensor wires for secure connections.
  • Verify that the brake levers are not stuck in the engaged position, which would cut motor power.
• Туруктуу жүрүм-турум:
  • Inspect all wiring for signs of fraying, pinching, or water ingress.
  • Ensure the controller is securely mounted and not vibrating excessively.

If these steps do not resolve the issue, please contact isinwheel customer support or a certified electric bike repair center.

9. Кепилдик жана колдоо

For warranty information, technical support, or service inquiries, please refer to the warranty card included with your product or visit the official isinwheel webсайт. Сатып алганыңыздын далили катары сатып алуу дүмүрчөгүңүздү сактаңыз.

10. Өндүрүүчү маалыматы

Өндүрүүчү: Shenzhen Xincheng Times Technology Co., Ltd

Controller Manufacturer (as per label): GALAXY BICYCLE CO.,LTD