1. Киришүү
The AIYIMA A20 is a 2.1 channel power amplifier designed for high-fidelity audio systems. It features a TPA3255 Class D amplifier chip, fully balanced circuitry with PFFB technology, and offers 300W x 2 output. Key functionalities include an adjustable High-Pass Filter (HPF), a dedicated subwoofer output, XLR and RCA input options, a 12V trigger for system integration, and a bypass function for use with external preamplifiers. This manual provides detailed instructions for the setup, operation, and maintenance of your A20 ampөмүрлүү.
2. Продукт бүтүп калдыview
2.1 алдыңкы панели
Сүрөт: алдыңкы view of the AIYIMA A20 amplifier, showing the power indicator, volume knob, and input selection switch.
- Power Indicator Light (On/Off/HPF): Indicates power status and HPF mode.
- Үн башкаргыч баскычы: Adjusts the output volume.
- Input Mode Switch (RCA/XLR): Selects between RCA and XLR audio inputs.
2.2 Арткы панель
Image: Rear panel diagram of the AIYIMA A20, detailing all input and output connections and controls.
- XLR Input (L/R): Balanced audio inputs for connecting sources with XLR outputs.
- RCA киргизүү (сол/оң): Unbalanced audio inputs for connecting sources with RCA outputs.
- RCA Gain Switch (+3dB): Provides a +3dB gain boost for RCA inputs, useful for matching lower-output sources.
- HPF Knob: Adjusts the High-Pass Filter frequency (60-200Hz) when HPF mode is active.
- ЧЫГАРЫҢЫЗ: Output for connecting an active subwoofer.
- BYPASS баскычы: Engages or disengages bypass mode. Hold for 3 seconds to switch.
- 12V Trigger Киргизүү/Чыгуу: For synchronized power control with compatible devices.
- Динамиктин чыгышы (сол/оң): Binding posts for connecting passive speakers.
- Киргизүү кубаты (DC 24-48V): Connects to the provided power adapter.
2.3 Өлчөмдөр
Image: Diagram illustrating the physical dimensions of the AIYIMA A20 ampөмүрлүү.
The AIYIMA A20 amplifier measures approximately 190mm (7.48 inches) in length, 142mm (5.59 inches) in width, and 46mm (1.81 inches) in height. Its net weight is approximately 1115g (2.2 pounds).
3. Негизги өзгөчөлүктөрү
- Жогорку аткаруу аудио: Achieves a 116dB Signal-to-Noise Ratio (SNR) and 0.002% THD+N for clear sound reproduction.
- 2.1 Системанын интеграциясы: Features an adjustable High-Pass Filter (HPF: 60-200Hz) and a dedicated Subwoofer Output for optimized 2.1 channel audio setups.
- Ийкемдүү туташуу: Includes XLR and RCA inputs with a toggle switch for source selection.
- Айланып өтүү режими: Allows the amplifier to function as a pure power amplifier, bypassing its internal volume control, ideal for use with external preampаман калгандар.
- RCA Gain Switch: A +3dB gain switch for RCA inputs to match various source levels.
- 12V триггер: Enables synchronized power on/off with other compatible audio components.
- Сапаттуу компоненттер: Built with a 4-layer gold-sunk PCB, German WIMA capacitors, and Japanese Rubycon capacitors for reliability and sound integrity.
- Swappable Op-Amps: Features LME49720 op-amps in a swappable design, allowing for customization.
- Натыйжалуу муздатуу: Internal air convection design ensures stable high-power operation.
4. Орнотуу колдонмосу
4.1 Байланыштар
Image: Diagram illustrating various connection possibilities for the AIYIMA A20 amplifier with different audio sources and outputs.
- Speaker Connection: Connect your passive speakers to the Speaker Output binding posts on the rear panel. Ensure correct polarity (Red/Positive to Red/Positive, Black/Negative to Black/Negative).
- Аудио булагы туташуу:
- XLR киргизүү: For balanced audio sources (e.g., high-end CD players, preamplifiers, DACs) using XLR cables.
- RCA киргизүү: For unbalanced audio sources (e.g., CD players, streamers, DACs, computers via 3.5mm to RCA adapter) using RCA cables.
- Сабвуфер туташуу: If using an active subwoofer, connect its input to the SUB OUT port on the A20.
- 12V Trigger Connection: If you have a compatible device (e.g., AIYIMA T20 preamp) with a 12V trigger output, connect it to the 12V Trigger Input on the A20 for synchronized power control.
- Power Connection: Connect the provided DC48V 5A power adapter to the Power Input (DC 24-48V) on the rear panel, then plug the adapter into a wall outlet.
5. Иштөө нускамалары
- Күйгүзүү/өчүрүү: Once all connections are secure, turn on the ampкубат өчүргүчүн колдонуп, көтөргүчтү күйгүзүңүз. Кубат индикаторунун жарыгы күйөт.
- Киргизүүнү тандоо: Use the Input Mode Switch on the front panel to select between RCA and XLR inputs based on your connected source.
- Үндү тууралоо: Rotate the Volume Control Knob on the front panel to adjust the audio output level. Start with a low volume and gradually increase it.
- High-Pass Filter (HPF) Adjustment:
Image: Detail showing the HPF knob on the rear panel with frequency markings (60Hz, 80Hz, 120Hz, 200Hz).
If you are using a subwoofer and wish to protect your main speakers from low bass frequencies, activate the HPF mode. Then, use the HPF Knob on the rear panel to set the desired crossover frequency between 60Hz and 200Hz. This directs frequencies below the set point to the SUB OUT and filters them from the main speaker outputs.
- Айланып өтүү режими:
Image: Close-up of the Bypass button on the rear panel.
To use the A20 as a pure power amplifier with an external preamplifier, press and hold the BYPASS button on the rear panel for 3 seconds. In bypass mode, the amplifier's internal volume control is maximized. Before engaging this mode, ensure the volume at your audio source or external preamplifier is reduced to prevent speaker damage. To exit bypass mode, press and hold the BYPASS button for 3 seconds again.
- RCA Gain Switch: If your RCA audio source has a low output level, you can engage the +3dB gain switch located near the RCA inputs on the rear panel to boost the signal.
6. Техникалык тейлөө
- Тазалоо: Use a soft, dry cloth to clean the exterior of the ampСуюк тазалоочу каражаттарды же эриткичтерди колдонуудан алыс болуңуз.
- Вентиляция: камсыз кылуу amplifier has adequate ventilation. Do not block the ventilation holes on the sides.
- Курчап турган чөйрө: Сактоо amplifier away from direct sunlight, heat sources, excessive moisture, and dust.
- Өчүрүү: Always power off the amplifier and disconnect it from the power outlet before performing any maintenance or making connections.
- Оп-Amp Алмашуу: If you choose to swap op-amps, ensure the amplifier is powered off and disconnected. Refer to specialized guides for proper op-amp handling and replacement procedures.
Сүрөт: Жакын план view of the internal circuit board, highlighting the swappable op-amps.
7. Кыйынчылыктарды
- Үн чыгышы жок:
- экендигин текшериңиз amplifier is powered on and the indicator light is active.
- Verify that the correct input (RCA or XLR) is selected.
- Ensure all audio cables are securely connected to both the source and the ampөмүрлүү.
- Check speaker connections for correct polarity and secure contact.
- Adjust the volume knob. If in Bypass mode, ensure the external preamplifier's volume is not muted or too low.
- Distorted Sound:
- Reduce the volume level from both the source and the ampөмүрлүү.
- Бузулган аудио кабелдерин текшериңиз.
- Динамиктин импедансы дал келгенин текшериңиз ampкөтөргүчтүн мүмкүнчүлүктөрү.
- If using RCA input, try toggling the +3dB gain switch off if the source output is already high.
- Уккан же ызылдаган ызы-чуу:
- Бардык байланыштар коопсуз экенин текшериңиз.
- туташтырып көрүңүз amplifier and source to the same power outlet to avoid ground loops.
- жылдырыңыз ampтоскоолдуктарды жаратышы мүмкүн болгон башка электрондук түзүлүштөрдөн алыс көтөргүч.
- 12V Trigger Not Functioning:
- Verify that the connected device's 12V trigger output is active.
- Ensure the 12V trigger cable is correctly connected.
8. Техникалык шарттар
| Өзгөчөлүк | Спецификация |
|---|---|
| Продукциянын өлчөмдөрү (L x W x Y) | 7.48 x 5.59 x 1.81 дюйм (190 x 142 x 46 мм) |
| Салмагы | 2.2 фунт (1115 г) |
| Элемент моделинин номери | A20 |
| Каналдардын саны | 2.1 |
| Тtage Киргизүү | DC 24-48 Volts |
| Сигнал-ызы-чуу катышы (SNR) | 116дБ |
| Жалпы гармоникалык бурмалоо + ызы-чуу (THD+N) | 0.002% |
| High-Pass Filter (HPF) Range | 60-200 Гц |
| Киргизүүлөр | XLR (Balanced), RCA (Unbalanced) |
| Чыгуулар | Speaker Output (L/R), SUB OUT (for active subwoofer) |
| Атайын функциялар | 12V Trigger, Bypass Mode, RCA +3dB Gain Switch, Swappable Op-Amps |
8.1 Power Output (Approximate)
Image: Table detailing the rated and peak output power of the A20 amplifier under different power supply units (PSU) and speaker impedances.
| PSU | Динамик импедансы | Rated Output Power (1kHz, THD 1%) | Peak Output Power (1kHz, THD 10%) |
|---|---|---|---|
| 36V/6A | 4Ω | 107W * 2 | 130W * 2 |
| 6Ω | 100W * 2 | 120W * 2 | |
| 8Ω | 94W * 2 | 110W * 2 | |
| 48V/5A | 4Ω | 120W * 2 | 144W * 2 |
| 6Ω | 110W * 2 | 130W * 2 | |
| 8Ω | 100W * 2 | 115W * 2 | |
| 48V/10A | 4Ω | 250W * 2 | 288W * 2 |
| 6Ω | 210W * 2 | 230W * 2 | |
| 8Ω | 150W * 2 | 185W * 2 |
9. Кутуда эмне бар
Image: Visual representation of the items included in the AIYIMA A20 product package.
- 1 x AIYIMA A20 Balanced Stereo Power Ampөмүрлүү
- 1 x DC48V 5A кубат адаптери
- 1 x User Manual
- 1 x Кепилдик картасы
- 1 x 12V Trigger Cable
10. Кепилдик жана колдоо
The AIYIMA A20 amplifier typically comes with a 2-year warranty from the date of purchase. Please refer to the included warranty card for specific terms and conditions. For technical support, troubleshooting assistance, or warranty claims, please contact AIYIMA customer service through the retailer where the product was purchased or visit the official AIYIMA webбайланыш маалыматы үчүн сайт.
