1. Киришүү
This manual provides essential instructions for the safe and efficient operation, installation, and maintenance of your LifePlus Commercial Ice Maker, Model KZB-45C. Please read this manual thoroughly before using the appliance and retain it for future reference.
Маанилүү коопсуздук маалыматы: Always follow basic safety precautions to reduce the risk of fire, electric shock, and injury. Ensure the appliance is properly grounded. Do not operate with a damaged cord or plug. Keep ventilation openings clear. Do not store explosive substances near the appliance.
2. Орнотуу жана орнотуу
2.1 Пакеттен чыгаруу
Carefully remove all packaging materials. Inspect the ice maker for any shipping damage. Report any damage to your retailer immediately. It is recommended to let the unit stand upright for 24 hours before first use to allow refrigerants to settle.
2.2 Орнотуу
The LifePlus KZB-45C ice maker can be used freestanding or under a counter. Ensure adequate ventilation around the unit. Avoid direct sunlight or heat sources. Maintain a minimum clearance of 5 inches from walls.
Image: The ice maker shown both freestanding on a countertop and installed under a kitchen counter, illustrating its versatile placement options. Dimensions are indicated as 24.8 inches high, 14.17 inches deep, and 15.7 inches wide.
2.3 Connecting the Drain Pipe
Connect the included drain pipe to the drain outlet port at the rear of the ice maker. Ensure the connection is secure to prevent leaks. Route the other end of the drain pipe to a suitable drain or sink.
Сүрөт: жакын план view of the rear of the ice maker, showing a hand connecting the white drain pipe to the designated "Water outlet" port. The power cord and water inlet ports are also visible.
For detailed instructions on disassembling the thin white tube for maintenance or replacement, refer to the diagram below:
Image: A four-step diagram illustrating how to disassemble the white thin tube from the tap water inlet. Steps include checking the blue ring, removing it, pressing and holding the white inner ring, and taking out the tube.
2.4 Water Inlet Options
Your ice maker supports two water inlet modes:
- Крандагы суу режими: Connect the included water inlet pipe to the "Tap water inlet" on the ice maker and to your faucet. Ensure the connection is secure.
- Self-Priming Water Design: Insert the self-priming hose into the "Self-Priming Water Inlet" at the rear and place the other end into a bucket or large water bottle. The internal pump will automatically draw water when activated.
Image: Two panels showing the water inlet options. The left panel depicts connecting the ice maker to a tap water faucet. The right panel shows connecting the ice maker to a large water bottle using the self-priming design, indicating no pump is needed.
Image: A close-up of the back of the ice maker, highlighting the "Self-Priming Water Inlet" and "Tap water inlet" ports. Arrows indicate water flow for both options.
Video: Ice Maker Installation & Usage Guide
Video: This video demonstrates the installation process, including connecting the drain pipe and setting up the water inlet for the LifePlus KZB-45C ice maker. It also covers basic usage steps.
3. Иштөө нускамалары
3.1 Биринчи колдонуу
Before first use, ensure the unit has been upright for 24 hours. Connect the power cord to a grounded outlet. The first ice-making cycle may take longer (up to 20 minutes) as the compressor stabilizes. The first batch of ice may also be thinner; quality improves with continued use.
3.2 Муз жасоо
After turning on the power, press the "Power" button on the control panel. The display will show "P2:20" (or similar, indicating initial cycle time). The machine will automatically detect the water mode and begin making ice. Each ice cycle typically takes 8-18 minutes, depending on the selected thickness.
Image: The LifePlus Commercial Ice Maker with a full bin of ice cubes, connected to both a faucet and a water bottle for water supply. The control panel shows a timer.
3.3 Adjusting Ice Thickness and Cycle Time
The ice maker offers 3 adjustable thickness options: thin (S), medium (M), or thick (L). To adjust the ice-making cycle time, press and hold the up (▲) or down (▼) button for 5 seconds. This allows customization of ice thickness and production speed.
Image: A close-up of the ice maker's control panel, showing the buttons for adjusting ice thickness (S-ice, M-ice, L-ice) and the up/down arrows for adjusting cycle time. Three examples of ice thickness are shown: S (8-10 mins), M (15 mins), L (18-20 mins).
3.4 Ice Storage and Removal
The unit has an 18 LBS ice storage bin. When the "Ice Full" indicator light turns on, the ice maker will automatically stop production. Remove ice from the bin to resume operation. Use the provided ice shovel to break up any large blocks of ice for easier storage.
Image: The ice maker displaying its features: 110 LBS/24H production, rapid cooling, 45 ice cubes per cycle, and an 18 LBS storage bin. Ice cubes are visible inside the unit.
3.5 Reservation Function (24H Timer)
The ice maker features a 24-hour timer function, allowing you to schedule ice production in advance. This is useful for preparing ice for parties or events.
Image: The ice maker shown in a kitchen setting, illustrating the "24H Reservation" feature for scheduled ice production, suggesting ice can be made overnight for daytime use.
4. Техникалык тейлөө жана тазалоо
4.1 Өзүн-өзү тазалоо режими
The ice maker is equipped with an automatic self-cleaning mode to maintain hygiene. To activate, press the "Clean" button in standby mode. You can adjust the duration in 5-minute increments using the up (▲) and down (▼) buttons. A full cleaning cycle takes approximately 30 minutes.
Image: The ice maker with water circulating during the self-cleaning process, highlighting the "Effortless Cleaning" feature.
4.2 Суу резервуарын төгүү
To empty the water tank, locate the drain plug inside the unit. Pull up the drain plug to allow water to flow out through the connected drain pipe.
Image: A close-up showing a hand pulling up the drain plug inside the ice maker's water tank to empty it. Water is seen flowing out of the drain pipe into a sink.
4.3 Жалпы тазалоо
Дайыма сыртын жумшак менен сүртүп туруу, гamp cloth. For the interior, use a mild detergent and water, then rinse thoroughly. Ensure all components are dry before reassembling and operating. Do not use abrasive cleaners or solvents.
5. Кыйынчылыктарды
This section addresses common issues you might encounter with your ice maker. If the problem persists after following these steps, please contact customer support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Муз жасоочу муз чыгарбайт. | Суу менен камсыздоо жок; бийлик маселеси; айлана-чөйрөнүн температурасы өтө жогору. | Check water connections and supply. Ensure power is connected. Operate in a cooler environment. |
| Ice is too thin or small. | Water temperature too high; short ice-making cycle. | Use colder water. Adjust the ice-making cycle time to a longer duration (L-ice setting). |
| "Ice Full" light is on, but bin is not full. | Муз сенсору бүтөлүп калган же кир. | Clean the ice sensor. Ensure ice is not blocking the sensor. |
| Суунун агып чыгышы. | Loose drain pipe connection; clogged drain. | Securely connect the drain pipe. Clear any obstructions in the drain. |
| Иш учурунда адаттан тыш ызы-чуу. | бирдиги деңгээл эмес; ички компонент маселеси. | Агрегаттын түз, туруктуу бетинде экенин текшериңиз. Эгер ызы-чуу кетпесе, кардарларды колдоо бөлүмүнө кайрылыңыз. |
6. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель номери | KZB-45C |
| Бренд | LifePlus |
| Продукциянын өлчөмдөрү (D x W x Y) | 15.69" x 14.17" x 24.8" |
| Салмагы | 43 фунт |
| Муз өндүрүшүнүн кубаттуулугу | Up to 110 LBS / 24 Hours |
| Муз сактоочу челектин сыйымдуулугу | 18 LBS |
| Муз циклинин убактысы | Ар бир партияга 8-18 мүнөт |
| Ice Thickness Options | 3 (Thin, Medium, Thick) |
| Суу киргизүү режимдери | Tap Water, Self-Priming |
| Ватtage | 300 ватт |
| Өзгөчөлүктөр | Self-Cleaning, 24H Timer, Overflow Protection |
7. Кепилдик жана колдоо
For warranty information, please refer to the documentation included with your purchase or contact LifePlus customer service. If you require technical assistance or have questions regarding your ice maker, please reach out to our support team.
Байланыш маалыматы: Please refer to the contact details provided on the product packaging or the official LifePlus webакыркы колдоо маалымат үчүн сайт.
8. Камтылган аксессуарлар
The following accessories are included with your LifePlus Commercial Ice Maker KZB-45C:
- Муз күрөк
- Ice cube bags (X5)
- Жазгы байлам
- Кирүүчү түтүк
- Канализация түтүгү
- Self-suction water inlet pipe
- 2-point Y-connector
- Чачтуу туташтыргыч
- Buckle (X5)
- Көрсөтмө (бул документ)
Image: A visual representation of the ice maker surrounded by all its included accessories, such as the ice shovel, various pipes, connectors, and buckles.
