ANTEC GSK850 V2 ATX3.1 850W толук модулдук кубат булагы колдонуучусунун колдонмосу

1. Киришүү

Thank you for choosing the Antec GSK850 V2 ATX3.1 850W Full Modular Power Supply Unit. This PSU is designed to provide stable and efficient power to your personal computer, meeting the latest ATX3.1 and PCIe 5.1 standards. It features 80 PLUS Gold certification for high energy efficiency, a PhaseWave Design (LLC + DC-DC) for stable output, and a Zero RPM Manager for quiet operation. The high-quality braided cables ensure durability and a clean build.

Figure 1.1: Antec GSK850 V2 850W Full Modular Power Supply Unit.

2. Коопсуздук маалыматы

Please read and understand all safety instructions before installing or operating this power supply unit. Failure to do so may result in personal injury or damage to the product and other components.

• Электр коркунучу: PSUну ачпаңыз casinг. Жогорку томtagТүзмөктүн розеткадан суурулган учурда да ичинде бөлүктөрү бар. Ичинде колдонуучу тейлей турган тетиктер жок.
• Вентиляция: PSU айланасында адекваттуу аба агымын камсыз кылыңыз. Вентиляция тешиктерин жаап албаңыз.
• Курчап турган чөйрө: Operate the PSU in a dry, well-ventilated environment. Avoid extreme temperatures, humidity, and dust.
• Кубат булагы: Connect the PSU only to a grounded power outlet with the correct voltage and frequency as specified on the unit's label.
• Кабелдер: Use only the modular cables provided with the PSU. Using third-party cables may cause damage.
• Орнотуу: Тутумду күйгүзүүдөн мурун бардык кабелдер ишенимдүү туташтырылганын текшериңиз.
• CircuitShield Protection: This PSU includes comprehensive industrial-grade protection (OCP, OVP, UVP, SCP, OPP, OTP, SIP, NLO) to safeguard your system. However, these protections are not a substitute for proper installation and handling.

3. Пакеттин мазмуну

Verify that all items listed below are present in your package. If any items are missing or damaged, please contact your retailer or Antec support.

• Antec GSK850 V2 850W Full Modular Power Supply Unit
• Modular Cable Set (including 12V-2x6 GPU cable for PCIe 5.1)
• AC Power Cord
• Монтаждоо бурамалар
• Колдонуучунун Колдонмосу (бул документ)

4. Орнотуу жана орнотуу

Follow these steps to properly install your Antec GSK850 V2 PSU into your computer system.

4.1. Даярдоо

1. Компьютериңиз толугу менен өчүрүлгөнүн жана розеткадан ажыратылганын текшериңиз.
2. Open your computer case to access the PSU mounting area.
3. If replacing an existing PSU, carefully disconnect all cables from the old unit and remove it.

4.2. PSU орнотуу

1. Position the Antec GSK850 V2 PSU into the designated PSU bay in your computer case. Ensure the fan is oriented correctly for optimal airflow (typically facing downwards if there's a bottom vent, or upwards if not).
2. Берилген монтаждык бурамалар аркылуу PSUну корпуска бекитиңиз.
3. Due to its compact size, this PSU is designed to fit a wide range of computer cases.
   

   Figure 4.1: Compact size for broad compatibility and full modular cable management.

4.3. Кабель туташтыруу

The GSK850 V2 is a full modular PSU, allowing you to connect only the cables necessary for your system, which improves airflow and cable management.

1. Connect the required modular cables to the corresponding ports on the PSU. Refer to the diagram below for cable types and connectors.
2. Connect the other end of each cable to the appropriate component (motherboard, CPU, GPU, SATA devices, etc.).
3. Ensure the 12V-2x6 GPU cable is used for PCIe 5.1 compatible graphics cards. This PSU is ATX3.1 and PCIe 5.1 compatible.
   

   Figure 4.2: ATX 3.1 and PCIe 5.1 compatibility with dedicated 12V-2x6 GPU cable.
4. The high-quality braided cables offer enhanced durability and a cleaner aesthetic.
   

   Figure 4.3: Illustration of the high-quality braided cables.

5. Refer to the table and image below for a detailed overview of the included cables and connectors:
   

   4.4-сүрөт: Детальдуу view of included cables and connectors.

   Table 4.1: Cable and Connector Specifications

   Саны	Кабель түрү	Кабелдин узундугу	Кабель үчүн туташтыргычтар
   1	24(20+4)pin M/B	500мм	1
   1	16(12+4)pin PCIe 5.1 12V-2x6 (600W)	500мм	1
   2	8(4+4)pin CPU	750мм	1
   2	8(6+2)pin PCI-E	600mm + 150mm	2
   2	SATA	450mm + 150mm + 150mm + 150mm	4
   1	Molex	450mm + 150mm + 150mm + 150mm	4

6. Organize cables neatly within your case for optimal airflow and aesthetics.

4.4. Акыркы кадамдар

1. Компьютериңиздин корпусун жабыңыз.
2. Connect the AC power cord to the PSU and then to a grounded wall outlet.
3. Кубат булагындагы кубат которгучун "ON" абалына коюңуз.
4. Компьютериңизди күйгүзүңүз.

5. Иштөө нускамалары

The Antec GSK850 V2 PSU is designed for efficient and quiet operation.

5.1. Zero RPM Manager

This PSU features a Zero RPM fan mode. In this mode, the 120mm silent fan remains off under low to moderate loads, ensuring silent operation. The thermal sensors activate the fan only when necessary, typically under higher power loads, to maintain optimal cooling and extend the PSU's lifespan.

Figure 5.1: Zero RPM Manager fan curve and 120mm silent fan illustration.

5.2. Күйгүзүү/өчүрүү

• To power on your system, ensure the PSU's main power switch is in the "ON" position, then press your computer's power button.
• To power off your system, shut down your operating system normally. For complete power disconnection, flip the PSU's main power switch to the "OFF" position and unplug the AC power cord.

6. Техникалык тейлөө

Proper maintenance can extend the lifespan of your PSU and ensure optimal performance.

• Тазалоо: Periodically clean the exterior of the PSU and the fan intake/exhaust vents using compressed air to remove dust buildup. Ensure the PSU is powered off and unplugged before cleaning.
• Кабелдик башкаруу: Бардык модулдук кабелдер бекем туташтырылганын жана корпустун ичиндеги аба агымына тоскоолдук кылбагандыгын дайыма текшерип туруңуз.
• Курчап турган чөйрө: Компьютер системаңыз үчүн таза, кургак жана жакшы желдетилген чөйрөнү сактаңыз.

7. Кыйынчылыктарды

If you encounter issues with your Antec GSK850 V2 PSU, refer to the following common troubleshooting steps.

7.1. No Power / System Not Turning On

• Электр байланыштарын текшерүү: Ensure the AC power cord is securely plugged into both the PSU and the wall outlet. Verify the PSU's main power switch is in the "ON" position.
• Ички байланыштар: Confirm that the 24-pin motherboard cable, 8-pin CPU cable, and all other necessary modular cables are firmly connected to both the PSU and the respective components.
• Дубал розеткасы: Test the wall outlet with another device to ensure it is providing power.
• Power Button/Front Panel: Ensure your case's front panel connectors (especially the power switch) are correctly connected to the motherboard.

7.2. System Instability / Random Shutdowns

• Ашыкча жүктөө: Системаңыздын кубаттуулук талаптары PSUнун 850 Вт кубаттуулугунан ашпасын текшериңиз.
• Ашыкча ысып кетүү: Check for proper ventilation within your PC case. Ensure the PSU fan is not obstructed and is operating when under load.
• Бошоң байланыштар: Re-seat all power cables to ensure they are making proper contact.
• Компоненттик маселелер: Instability can also be caused by other components (RAM, GPU, CPU). If the PSU seems fine, test other components.

7.3. Вентилятордун ызы-чуусу

• Нөл RPM режими: The fan may not spin under low loads. This is normal operation for the Zero RPM Manager.
• Чаңдын пайда болушу: Вентилятор менен желдеткичтерди "Техникалык тейлөө" бөлүмүндө сүрөттөлгөндөй тазалаңыз.
• Тоскоолдук: Ensure no cables or foreign objects are interfering with the fan blades.

If these steps do not resolve your issue, please contact Antec customer support.

8. Техникалык шарттар

Detailed technical specifications for the Antec GSK850 V2 PSU.

9. Кепилдик жана колдоо

Antec stands behind the quality of its products.

9.1. Кепилдик маалыматы

The Antec GSK850 V2 PSU comes with a 10 жылдык кепилдик from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, please visit the official Antec webсайт.

9.2. Кардарларды колдоо кызматы

If you require technical assistance, have questions about your product, or need to initiate a warranty claim, please contact Antec customer support through their official channels.

You can find more information and support resources by visiting the Antec Store: Antec Official Store