Introduction
The COROS Bike Cadence Sensor is designed to help cyclists track their pedaling RPMs (revolutions per minute) to improve pedaling efficiency. This sensor is compatible with both outdoor and indoor rides, including most spin bikes, and pairs seamlessly with bike computers, smartwatches, or smartphones via Bluetooth connectivity.
Кутуда эмне бар
Пакетти ачканда, сиз төмөнкү компоненттерди табасыз:
- COROS Bike Cadence Sensor
- Сенсор орнотуу
- Rubber Bands for mounting
- Quick Start Guide
- Продукт коопсуздугу маалыматы
Орнотуу жана орнотуу
1. Батареяны орнотуу
The COROS Bike Cadence Sensor uses a CR2032 coin cell battery. Ensure the battery is correctly inserted before use. The battery compartment is typically located on the back of the sensor.
2. Сенсорду орнотуу
The sensor is designed for easy installation on your bike's crank arm. Use the provided rubber bands to securely attach the sensor. Position the sensor on the non-drive side crank arm for optimal cadence tracking.
3. Түзмөктөр менен жупташтыруу
The COROS Bike Cadence Sensor connects via Bluetooth. To pair, activate the sensor by rotating the crank arm a few times. Then, open the settings on your compatible bike computer, smartwatch, or smartphone application and search for new Bluetooth devices. Select the COROS Cadence Sensor from the list to establish a connection. The sensor is not compatible with ANT+ devices.
Иштөө нускамалары
Once paired, the sensor will automatically begin tracking your pedaling RPMs when you start cycling. This data is transmitted in real-time to your connected device, allowing you to monitor and optimize your pedaling efficiency. The sensor works effectively for both outdoor rides and indoor training sessions, including use with most spin bikes.
Техникалык тейлөө
Батарея өмүрү жана алмаштыруу
The CR2032 battery in your COROS Bike Cadence Sensor is designed to last up to 12 months under typical usage conditions. When the battery level is low, your connected device may display a notification. To replace the battery, carefully open the battery compartment, remove the old battery, and insert a new CR2032 battery with the positive (+) side facing up. Ensure the compartment is sealed tightly after replacement.
Cleaning and Water Resistance
The sensor has an IP67 water rating, providing protection against dust and temporary immersion in water. This makes it suitable for all-weather protection and durability. To clean the sensor, wipe it with a damp кездеме. Аппаратка зыян келтирүүчү катаал химиялык заттарды же абразивдүү материалдарды колдонуудан алыс болуңуз.
Проблемаларды чечүү
- Sensor Not Connecting: Ensure the sensor has a fresh battery and is properly activated by rotating the crank arm. Check that Bluetooth is enabled on your receiving device and that the sensor is within range.
- Туура эмес окуулар: Verify that the sensor is securely mounted on the crank arm and is not obstructed. Ensure there are no strong electromagnetic interferences nearby.
- Батареянын бат түгөнүп калышы: Confirm that the sensor is not left in an active state when not in use. Replace the battery if it is old or if the issue persists.
Техникалык шарттар
| Бренд | КОРОС |
| Модель аты | COROS Bike Cadence Sensor |
| Түс | Кара |
| Сенсор түрү | Каденция сенсору |
| Байланыш технологиясы | Bluetooth (Not compatible with ANT+ devices) |
| Монтаж түрү | Кранк колунун орнотмосу |
| Батарея түрү | CR2032 Lithium Manganese Dioxide |
| Батареянын иштөө мөөнөтү | 12 айга чейин |
| Суу рейтинги | IP67 |
| Салмагы | 11г |
| Элементтин өлчөмдөрү (LxWxH) | 3.94 x 3.94 x 3.94 дюйм |
Кепилдик жана колдоо
The COROS Bike Cadence Sensor comes with a 1-year manufacturer's warranty. For technical support, warranty claims, or additional product information, please visit the official COROS webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз. Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактаңыз.
