1. Киришүү
This manual provides instructions for the safe and effective operation of the WALFRONT 0-10V Adjustable Signal Generator. This device is designed to provide a stable 0-10V voltage signal output for various industrial and testing applications.
2. Продукциянын өзгөчөлүктөрү
- 0-10V аналогдук чыгышы: Features one analog output channel capable of generating a 0-10V voltage сигнал.
- Дисплей калибрлөө: Equipped with potentiometers on the back for precise voltage display calibration.
- Күчтүү коргоо: Includes overcurrent protection, reverse connection protection, and a protective back cover to resist dusty environments.
- Таза дисплей: A 4-digit digital tube display with high brightness, offering three switchable display modes: Voltage, Percentage, and Hz.
- Жөнгө салынуучу чыгаруу: A rotation encoder allows for fine and coarse tuning of the output signal.
- Жөнөкөй зымдар: Designed with large terminals for straightforward and secure connections.
3. Техникалык шарттар
| Параметр | Нарк |
|---|---|
| Модел | gorbps0a1e |
| Электр камсыздоо | 15-30В DC |
| Output Channel | 1 Analog Output (0-10V) |
| Дисплейдин тактыгы | 0.01V |
| Operation Accuracy | 0.01V |
| Максималдуу жүктөө агымы | 0.2A |
| Дисплей түрү | 4-Digit Digital Tube Display |
| Encoder Pulses per Turn | 20 Импульстар |
| Иштөө температурасы | -10°Cден 60°Cге чейин |
| Өлчөмдөр | 3.54 x 2.36 x 1.97 дюйм (болжол менен) |
| Салмагы | 2.12 унция (болжол менен) |
4. Орнотуу жана зымдар
Before connecting the signal generator, ensure the power supply is off. Connect the device according to the wiring diagram below. The large terminals facilitate easy and secure connections.
4.1-сүрөт: Wiring schematic diagram for connecting the signal generator to voltage signal acquisition equipment. Connect V+ and V- to the 24V power supply, and OUT+ and OUT- to AV+ and AV- of the acquisition equipment, respectively.
Электр камсыздоо: The device requires a 15-30V DC power supply. Ensure correct polarity as the device includes anti-reverse connection protection.
Чыгуу туташуу: Connect the output terminals (OUT+ and OUT-) to your target device or system that requires a 0-10V analog input.
5. Иштөө нускамалары
Once properly wired and powered on, the signal generator's 4-digit digital tube display will illuminate.
5.1 Чыгарылыштын көлөмүн жөндөөtage
5.1-сүрөт: Фронт view of the signal generator showing the digital display and the rotary encoder for output adjustment.
- Бюрократия коддогуч: Use the rotary encoder knob on the front panel to adjust the output voltage. Turning the knob clockwise increases the voltage, and counter-clockwise decreases it.
- Coarse and Fine Tuning: The encoder provides both coarse and fine tuning capabilities. A single turn of the encoder corresponds to 20 pulses, allowing for precise adjustments.
- Saving Output Value: Press the rotary encoder knob to save the current output value. This ensures the device retains the setting even after power cycling.
5.2 Көрсөтүү режимдери
The digital display can switch between three modes:
- Тtage (V): Учурдагы чыгаруу көлөмүн көрсөтөтtage вольтто.
- Персенtage (%): Displays the output as a percentage of the full 10V scale.
- Жыштык (Гц): (Note: While the product title mentions "Frequency Control Meter", the specifications and description primarily focus on voltage output. This mode might display a related frequency if applicable, or it might be a general display option for other models. For this 0-10V model, the voltagе жана процентtage modes are most relevant.)
Refer to the device's specific button or knob press sequence (if any, not detailed in provided info) to cycle through these display modes.
5.3 Калибрлөө дисплей
5.2-сүрөт: The signal generator's output being measured by a multimeter, showing a stable 10.00V reading, demonstrating accuracy.
Эгерде керсетулген томtage value deviates from the actual output, you can calibrate it:
- Connect a precise voltmeter or multimeter to the output terminals (OUT+ and OUT-).
- Томду табыңызtage display calibration potentiometers on the back of the module.
- Adjust these potentiometers carefully until the value displayed on the signal generator matches the reading on your external voltmeter.
6. Тиркемелер
The WALFRONT 0-10V Adjustable Signal Generator is suitable for a variety of industrial and testing scenarios:
6.1-сүрөт: Examples of the signal generator's diverse applications in industrial settings.
- Valve Regulation: For controlling industrial valves that accept 0-10V input.
- Жыштыкты көзөмөлдөө: (If used in conjunction with devices that convert voltage to frequency.)
- PLC Debugging: Providing precise analog signals for testing and debugging Programmable Logic Controllers.
- Panel Debugging: Assisting in the setup and troubleshooting of control panels.
- LED сыноо: Supplying controlled voltage for testing LED drivers or arrays.
- Analog Transmitter Output Simulation: Simulating outputs from various analog transmitters.
7. Техникалык тейлөө
The WALFRONT Signal Generator is designed for durability and requires minimal maintenance.
- Тазалоо: Аппаратты таза жана чаңдан алыс кармаңыз. Тазалоо үчүн жумшак, кургак чүпүрөктү колдонуңуз. Суюк тазалагычтардан алыс болуңуз.
- Курчап турган чөйрө: Operate the device within the specified temperature range (-10°C to 60°C). The protective back cover helps resist dusty environments.
- Сактагыч: Аппаратты колдонбогондо салкын, кургак жерде сактаңыз.
- Текшерүү: Periodically inspect wiring connections for security and integrity.
8. Кыйынчылыктарды
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Дисплей жок/Кубат жок | Туура эмес электр энергиясыtage же полярдуулук; электр кубатына туташуунун бузулушу. | Verify power supply is 15-30V DC and connected with correct polarity. Check all power connections. |
| Туура эмес чыгаруу томtage | Display calibration needed; faulty wiring to target device; target device input impedance issue. | Perform display calibration (Section 5.3). Check output wiring. Ensure target device is compatible with 0-10V input. |
| Чыгуу томtage туруксуз | Unstable power supply; excessive load current. | Ensure power supply is stable. Verify load current does not exceed 0.2A. |
| Display shows unexpected values (e.g., "Hz" when expecting "V") | Incorrect display mode selected. | Cycle through display modes using the appropriate control (refer to device specific operation if available). |
9. Пакеттин мазмуну
- 1 x WALFRONT 0-10V Adjustable Signal Generator
10. Кепилдик жана колдоо
Кепилдик жөнүндө маалымат жана техникалык колдоо алуу үчүн, сатуучуга же өндүрүүчүнүн расмий өкүлүнө кайрылыңыз webсайт. Кепилдик дооматтары үчүн сатып алуу дүмүрчөгүңүздү сактаңыз.
Manufacturer: WALFRONT
ASIN: B0FP9PYVKQ
Алгачкы жеткиликтүү болгон күнү: 2025-жылдын 30-августу
Кошумча жардам алуу үчүн, сураныч, баш багыңыз Walfront Store on Amazon.
