1. Киришүү
This manual provides detailed instructions for the installation, operation, and maintenance of your Antec Flux Rear Mid-Tower ATX PC Case. Please read this manual thoroughly before beginning assembly to ensure correct setup and optimal performance.
Коопсуздук маалыматы: Always disconnect power from all components before installation or maintenance. Handle components with care to prevent damage. Wear an anti-static wrist strap when handling sensitive electronic parts.
Image: The Antec Flux Rear Mid-Tower ATX PC Case, showcasing its tempered glass side panel, mesh front panel, and pre-installed RGB fans.
2. Пакеттин мазмуну
Төмөндө тизмеленген бардык компоненттер пакетиңизде бар экенин текшериңиз:
- Antec Flux Rear Mid-Tower ATX PC Case
- 2 x 140mm ARGB PWM Fans (Front, pre-installed)
- 2 x 120mm PWM Reverse Fans (PSU Shroud, pre-installed)
- 1 x 140mm ARGB PWM Fan (Rear, pre-installed)
- Accessory Box (screws, cable ties, user manual)
- 13A PSU Extension Cable
- GPU колдоо кронштейн
Сүрөт: жарылган view illustrating the various components of the Antec Flux Rear PC case, including the chassis, panels, and fans.
3. Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Модель аты | Flux Rear |
| Иштин түрү | Ара Tower |
| Motherboard шайкештиги | ATX, Micro-ATX, ITX (Supports Back-Connect Motherboards) |
| Өлчөмдөрү (LxWxH) | 18.11 x 18.11 x 9.45 дюйм (460 x 460 x 240 мм) |
| Элемент Салмагы | 18.03 фунт (8.18 кг) |
| Материал | Эритме болот, чыңдалган айнек |
| Алдын ала орнотулган күйөрмандар | 2x 140mm ARGB PWM (Front), 2x 120mm PWM Reverse (PSU Shroud), 1x 140mm ARGB PWM (Rear) |
| Желдеткичти колдоо (макс.) | Front: 2x 140mm; Top: 2x 140mm or 3x 120mm; Rear: 1x 140mm or 1x 120mm; PSU Shroud: 2x 120mm |
| Radiator Support (Max) | Top: Up to 360mm; Rear: Up to 120mm |
| CPU Cooler Max Бийиктиги | 180 мм |
| GPU Max Length | 400 мм |
| Электр менен жабдууну орнотуу | Front Mount (Max length without cable: 170mm) |
| Drive Bays | 1x 3.5", 2x 2.5" |
| I/O порттору | 2x USB 3.0, 1x USB-C 10Gbps, Headphone/Mic Combo Jack, Power Button, LED Control Button |
4. Орнотуу жана орнотуу
4.1 Ишти даярдоо
The Antec Flux Rear case features a tool-free panel design for easy access during assembly.
- To remove the tempered glass side panel, gently pull it open from the rear hinge.
- The metal right side panel can be removed by sliding it backward and lifting.
- The front mesh panel can be detached by pulling it from the bottom edge.
- The top panel can be lifted off after removing any securing screws.
Image: Illustration of the tool-free panel design, demonstrating how to remove the top, left glass, left metal, and front panels for access.
4.2 Motherboard орнотуу
The case supports ATX, Micro-ATX, and ITX motherboards, including back-connect models.
- Ensure the correct standoffs are installed for your motherboard size.
- Carefully place the motherboard into the chassis, aligning it with the standoffs and I/O shield opening.
- Берилген бурамалар менен энелик тактаны бекитиңиз.
- For back-connect motherboards, route all necessary cables through the designated cutouts behind the motherboard tray.
Сүрөт: ички view of the case demonstrating support for back-connect motherboards, with highlighted cable routing paths behind the motherboard tray.
4.3 Электр менен камсыздоону орнотуу
The Antec Flux Rear features a front-mounted PSU chamber.
- Install your power supply unit (PSU) into the front chamber.
- Connect the included 13A extension cable to the PSU and route it to the rear power inlet.
- Ensure the extension cable is securely connected and routed to avoid interference.
Сүрөт: А view of the front-mounted PSU chamber and the 13A extension cable, illustrating how the power supply is positioned and connected.
Image: Four distinct diagrams illustrating various methods for routing the power extension cable, depending on the power connector's position and desired cable path.
4.4 Дискти орнотуу (HDD/SSD)
The case provides dedicated mounting points for storage drives.
- Install 3.5" hard disk drives (HDDs) in the designated bay located at the rear of the case.
- Install 2.5" solid-state drives (SSDs) in the mounting locations behind the motherboard tray.
- Secure all drives with the provided screws.
Image: An internal diagram of the PC case, clearly marking the installation areas for the CPU, GPU, Motherboard, SSD, HDD, and Power Supply.
4.5 Графикалык картаны орнотуу
Install your graphics card into the appropriate PCIe slot on your motherboard.
- Керектүү PCIe уячасынын капкактарын корпустун арткы бөлүгүнөн алып салыңыз.
- Insert the graphics card firmly into the PCIe slot until it clicks into place.
- Графикалык картаны бурамалар менен бекитиңиз.
- Utilize the built-in GPU support bracket to prevent sag for heavier graphics cards. Adjust the bracket to support the card's weight.
Image: A close-up illustration of the built-in GPU support bracket, demonstrating its function in preventing graphics card sag.
4.6 Желдеткичти жана Радиаторду орнотуу
The case comes with five pre-installed PWM fans and offers extensive support for additional cooling.
- Жогорку: Supports up to 360mm radiators or 2x 140mm / 3x 120mm fans.
- Арткы: Supports 1x 140mm or 1x 120mm fan, or a 120mm radiator (with thickness between 55-70mm).
- Алдыңкы: Supports 2x 140mm fans.
- PSU капкагы: Supports 2x 120mm fans.
- When installing radiators, ensure proper clearance with other components.
Image: A diagram illustrating the various fan and radiator mounting locations within the PC case, along with their supported sizes.
Image: An illustration detailing the installation process for a 360mm radiator and a rear fan in the top section of the PC case.
4.7 Кабелди башкаруу
The case offers 37mm of space behind the motherboard tray for cable management, equipped with grommets and Velcro straps.
- Route power and data cables through the grommets and tie-down points.
- Use the included Velcro straps to bundle and secure cables, ensuring a clean interior and unobstructed airflow.
Image: A diagram illustrating the cable management features behind the motherboard tray, including space depth, cable ties, and grommets.
5. Операция
5.1 Күйгүзүү
After completing all installations and connections, ensure the power cable is securely plugged into the rear of the case and a power outlet. Press the power button located on the top I/O panel to start your system.
5.2 I/O панелинин функциялары
The top I/O panel provides convenient access to essential ports and controls:
- Кубат баскычы: Системаны күйгүзөт/өчүрөт.
- USB 3.0 порттору (x2): USB 3.0 түзмөктөрүн туташтыруу үчүн.
- USB-C 10Gbps Port: For connecting USB-C devices with high-speed data transfer.
- Наушник/микрофон уячасы: Аудио киргизүү/чыгаруу үчүн.
- LED баскычы: Controls the lighting effects of the ARGB fans.
Сүрөт: жакын план view of the top I/O panel, detailing the power button, USB 3.0 ports, USB-C 10Gbps port, headphone/mic combo jack, and LED control button.
5.3 Аба агымы жана муздатуу
The Antec Flux Rear case is designed with the F-LUX Platform for optimized airflow and cooling performance.
- F-LUX Platform: Features a front-mounted PSU chamber that creates an unobstructed airflow path at the bottom of the case, enhancing GPU cooling.
- Multi-directional Vent Design: Incorporates extensive air intakes at the bottom, power supply chamber, lower sides, top, and a large-area mesh front panel to create a dedicated airflow channel.
- Алдын ала орнотулган күйөрмандар: The five pre-installed PWM fans are strategically placed to facilitate efficient air movement throughout the case.
Image: A diagram illustrating the 'Flow Luxury' F-LUX Platform, showing the internal airflow paths designed to enhance GPU cooling.
Image: A diagram detailing the 'Flux Airflow' system, indicating the positions and directions of the pre-installed fans within the PC case.
Image: Four separate images highlighting the multi-directional vent design, showing air intake points on the front panel, lower right side, left side of the PSU chamber, and the top panel.
Image: A diagram illustrating the optimized bottom air intake, specifically designed for efficient GPU cooling, with measurements for graphics card space and bottom clearance.
6. Техникалык тейлөө
Үзгүлтүксүз тейлөө сиздин PC корпусуңуздун оптималдуу иштешин жана узак иштөөсүн камсыз кылууга жардам берет.
- Чаң чыпкалары: Periodically remove and clean the dust filters located on the front, top, and bottom of the case. Use compressed air or a soft brush to remove accumulated dust.
- Тышкы тазалоо: Сырткы беттерин жумшак менен сүртүңүз, гamp кездеме. Финишке зыян келтирүүчү абразивдүү тазалагычтардан же эриткичтерден качыңыз.
- Ички тазалоо: With the system powered off and unplugged, use compressed air to clear dust from internal components and fans.
7. Кыйынчылыктарды
If you encounter issues with your PC case, refer to the following common problems and solutions:
- Система күйбөй жатат:
- Ensure the PSU is properly installed and connected to the 13A extension cable.
- Verify that the power button cable is correctly connected to the motherboard's front panel header.
- Электр розеткасынын иштешин текшериңиз.
- Fans Not Spinning or No RGB:
- Желдеткичтин электр кабелдери энелик платага же желдеткич контроллерине ишенимдүү туташтырылганын ырастаңыз.
- Ensure ARGB cables are connected to the motherboard's ARGB header or a compatible controller.
- Press the LED button on the I/O panel to cycle through lighting modes or ensure it's enabled.
- USB порттору иштебейт:
- Check if the USB 3.0 and USB-C cables from the front panel are correctly connected to the motherboard headers.
8. Кепилдик жана колдоо
Antec products are covered by a limited warranty. For specific warranty terms and conditions, please refer to the warranty card included with your product or visit the official Antec webсайт.
For technical support, product inquiries, or assistance with troubleshooting, please contact Antec customer service through their official webсайт же продукт документациясында көрсөтүлгөн байланыш маалыматы.
