1. Киришүү
This manual provides essential information for the safe installation, operation, and maintenance of your Stelpro Ultra-Quiet Wall Convector Heater, model ASHC0502WCW. Please read these instructions thoroughly before installation and retain them for future reference. This heater is designed to provide supplemental heat for small indoor spaces.
2. Коопсуздук маалыматы
ЭСКЕРТҮҮ: Электр тогуна урунуу коркунучу бар. Орнотуу бардык улуттук жана жергиликтүү электр эрежелерине ылайык квалификациялуу электрик тарабынан жүргүзүлүшү керек.
- Бул жылыткыч арналган hardwired connection only. It is not a plug-in unit.
- Бул бирдик does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation. Mechanical thermostats are not compatible.
- Ensure the power supply is disconnected at the circuit breaker before attempting any installation, maintenance, or wiring.
- Do not install the heater near flammable materials, curtains, or furniture. Maintain adequate clearance as specified in installation guidelines.
- Do not insert foreign objects into any ventilation or exhaust opening as this may cause electric shock, fire, or damage to the heater.
- Бул жылыткыч колдонулганда ысык болот. Күйүктүн алдын алуу үчүн жылаңач териге ысык беттерге тийбеңиз.
- Do not use this heater in wet or moist locations unless specifically rated for such environments.
3. Пакеттин мазмуну
Орнотууну баштоодон мурун бардык компоненттер бар экендигин текшериңиз:
- Stelpro Wall Convector Heater Unit (ASHC0502WCW)
- Кронштейн орнотуу
- Орнотуу жабдуулары (буроолор, анкерлер)
- Instruction Manual
Сүрөт 1: Алдыңкы бурчтуу view of the Stelpro Ultra-Quiet Wall Convector Heater.
4. Техникалык шарттар
| Бренд | Stelpro |
| Модель номери | ASHC0502WCW |
| Power Output | 500 Вт (240 В чыңалууда) / 375 Вт (208 В чыңалууда) |
| Тtage | 240 Volts (also compatible with 208V) |
| Өлчөмдөр (D x W x H) | 3.94"D x 17.31"W x 17.56"H (101mm D x 440mm W x 446mm H) |
| Жылытуу каптоо | 50 чарчы фут чейин |
| Монтаж түрү | Дубалга орнотуу |
| Түс | Ак |
| Салмагы | 11.2 фунт |
Сүрөт 2: Каптал view of the heater showing its compact dimensions: 17 9/16" H x 17 5/16" W x 3 15/16" D.
5. Орнотуу жана орнотуу
The Stelpro ASHC0502WCW heater is designed for surface-mount wall installation with a concealed bracket for a clean finish. It requires a 240V or 208V hardwired electrical connection and an external electronic wall thermostat.
5.1 Алдын ала орнотуу текшерүү тизмеси
- Ensure the power supply is OFF at the main circuit breaker.
- Confirm you have an appropriate electronic wall thermostat (not included).
- Gather necessary tools: drill, screwdriver, wire strippers, level, measuring tape.
- Select a suitable wall location, ensuring proper clearances from floors, ceilings, and adjacent walls as per local codes and the heater's specifications.
5.2 Жылыткычты орнотуу
- Жылыткычты анын таңгагынан кылдаттык менен чыгарыңыз.
- Detach the mounting bracket from the back of the heater.
- Position the mounting bracket on the wall at the desired height, ensuring it is level. Mark the screw hole locations.
- Drill pilot holes if necessary and secure the mounting bracket to the wall using the provided hardware. Ensure it is firmly attached.
- The heater features a back entry plate with cable clampзымдар үчүн.
Image 3: Illustration of the concealed mounting bracket system for secure and discreet installation.
5.3 Электрдик туташуу
IMPORTANT: All wiring must comply with the National Electrical Code (NEC) and local codes. Consult a qualified electrician if you are unsure about any part of the wiring process.
- Route the 240V or 208V electrical supply wires to the heater's junction box located at the back entry plate.
- Connect the heater's wires to the supply wires according to the wiring diagram provided in the full installation guide (refer to the diagram on the heater or in the included manual). Typically, this involves connecting the two hot wires and the ground wire.
- Secure all connections with appropriate wire connectors.
- Ensure all wiring is neatly tucked into the junction box and the cover is securely fastened.
Image 4: Visual representation of the 240V hardwired connection required for the heater.
5.4 Finalizing Installation
- Carefully hang the heater unit onto the mounted bracket, ensuring it clicks securely into place.
- Install your electronic wall thermostat according to its specific instructions.
- Once the heater and thermostat are fully installed and all connections are secure, restore power at the circuit breaker.
Image 5: The Stelpro convector heater seamlessly installed on a wall in a home office environment.
6. Иштөө нускамалары
Since the Stelpro ASHC0502WCW heater does not have a built-in thermostat, its operation is entirely controlled by the external electronic wall thermostat you have installed.
- Күйгүзүү: After installation, ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Термостат башкаруу: Adjust the desired temperature setting on your electronic wall thermostat. The heater will activate when the room temperature falls below the set point and deactivate when it reaches the set point.
- Тынч иштөө: This convector heater operates silently, providing natural convection heat without a fan.
7. Техникалык тейлөө
Үзгүлтүксүз техникалык тейлөө жылыткычыңыздын оптималдуу иштешин жана узак мөөнөттүү иштешин камсыз кылат. Ар кандай техникалык тейлөө иштерин жүргүзүүдөн мурун, ар дайым автоматтык өчүргүчтөн электр кубатын өчүрүп коюңуз.
- Тазалоо: Жылыткычтын сыртын мезгил-мезгили менен жумшак, d менен сүртүп туруңузamp cloth. Do not use abrasive cleaners, solvents, or spray directly onto the heater.
- Чаңды тазалоо: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. Ensure these areas remain clear for proper airflow.
- Текшерүү: Annually inspect the heater for any signs of damage, loose connections, or unusual wear. If any issues are found, contact a qualified electrician or Stelpro support.
8. Кыйынчылыктарды
If your heater is not functioning as expected, consult the following common issues before contacting support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жылыткыч күйбөйт. | Аппаратка кубат жок. Thermostat set too low or off. Бошогон зымдар байланышы. | Электр өчүргүчтү текшерүү. Ensure thermostat is set above room temperature and is functioning. Зымдардын туташуусун текшериңиз (алдын ала электр зымдарын өчүрүңүз). |
| Жылыткыч жетишсиз жылуулук чыгарат. | Heater size inadequate for room. Аба агымынын тоскоолдугу. Термостаттын бузулушу. | Ensure heater coverage (50 sq ft) matches room size. Clear any obstructions from intake/discharge grilles. Test or replace thermostat. |
| Unusual odors or sounds. | Жаңы блоктун күйүп кетиши (баштапкы колдонуу). Чаңдын топтолушу. Ички компонент маселеси. | Initial odors are normal and will dissipate. Clean heater as per maintenance section. If persistent or severe, disconnect power and contact support. |
If troubleshooting steps do not resolve the issue, please contact Stelpro customer support or a qualified electrician.
9. Кепилдик жана колдоо
Your Stelpro Ultra-Quiet Wall Convector Heater ASHC0502WCW is backed by a comprehensive warranty:
- 5 жылдык чектелген кепилдик on the overall unit.
- Өмүр бою кепилдик жылытуу элементинде.
- 3 жыл кепилдик on electronic components.
For warranty claims, technical assistance, or further support, please visit the official Stelpro webсайтка же кардарларды тейлөө бөлүмүнө кайрылыңыз. Кепилдикти текшерүү үчүн сатып алганыңыздын далилин сактаңыз.
Stelpro Webсайт: www.stelpro.com
