Маанилүү коопсуздук маалыматы
Please read this entire instruction manual carefully before installing or using your Stelpro Ultra-Quiet Wall Convector Heater. Failure to follow these instructions may result in fire, electric shock, serious injury, or property damage. Keep this manual for future reference.
- Бул жылыткыч арналган hardwired installation only. It is not a plug-in unit.
- Бул жылыткыч does not include a built-in thermostat. An external electronic wall thermostat (sold separately) is required for operation and temperature control. Mechanical thermostats are not compatible.
- Ensure the electrical supply matches the heater's requirements (240V or 208V).
- Орнотуу бардык улуттук жана жергиликтүү электр эрежелерине ылайык квалификациялуу электрик тарабынан аткарылышы керек.
- Do not install the heater near flammable materials or in areas where gasoline, paint, or other flammable liquids are stored or used.
- Maintain proper clearances from walls, furniture, and drapes as specified in the installation guide.
Орнотуу жана орнотуу
The Stelpro ASHC1502WCW convector heater is designed for surface-mount wall installation. For safe and proper operation, professional installation is highly recommended.
Монтаждоо
The heater features a concealed mounting bracket and a back entry plate with cable clamps for a clean, secure installation. Ensure the mounting surface is flat and capable of supporting the heater's weight.
Электр байланышы
This unit requires a 240V or 208V hardwired electrical connection. It is crucial to connect the heater to a dedicated circuit with appropriate overcurrent protection. Refer to the wiring diagram provided with the product packaging for detailed electrical connection instructions.
Thermostat Requirement
As this heater does not have an integrated thermostat, an external electronic wall thermostat must be installed and wired to control the heater's operation. Ensure the chosen thermostat is compatible with 240V/208V electric heating systems.
Иштөө нускамалары
Once properly installed and connected to an electronic wall thermostat, operating your Stelpro convector heater is straightforward.
- Күйгүзүү: Ensure the circuit breaker supplying power to the heater is in the 'ON' position.
- Термостатты орнотуу: Use your external electronic wall thermostat to set the desired room temperature. The heater will activate when the room temperature falls below the set point and deactivate once the set point is reached.
- Тынч иштөө: This convector heater operates silently, providing consistent warmth without fan noise.
- Алгачкы колдонуу: During the first few hours of operation, a slight odor may be emitted. This is normal and will dissipate quickly as manufacturing residues burn off. Ensure adequate ventilation during this period.
Техникалык тейлөө
Your Stelpro convector heater requires minimal maintenance to ensure optimal performance and longevity.
- Тазалоо: Мезгил-мезгили менен жылыткычтын сыртын жумшак, гamp cloth. Do not use abrasive cleaners or solvents. Ensure the heater is turned off and cool before cleaning.
- Чаңды тазалоо: Use a vacuum cleaner with a brush attachment to remove dust from the air intake and discharge grilles. This helps maintain efficient airflow.
- Текшерүү: Annually, inspect the heater for any signs of damage or loose connections. If any issues are found, contact a qualified electrician for inspection and repair.
- Do Not Obstruct: Never block the air intake or discharge openings of the heater. This can lead to overheating and reduced efficiency.
Проблемаларды чечүү
If your Stelpro convector heater is not operating as expected, consult the following troubleshooting guide before contacting support.
| Көйгөй | Мүмкүн себеп | Чечим |
|---|---|---|
| Жылыткыч күйбөйт. | Электр энергиясы жок. Термостат өтө төмөн коюлган. Faulty wiring or thermostat. | Электр өчүргүчтү текшерүү. Термостат жөндөөлөрүн жогорулатуу. Квалификациялуу электрикке кайрылыңыз. |
| Жылыткыч жетишсиз жылуулук чыгарат. | Бөлмөнүн көлөмү жылытуу кубаттуулугунан ашып кетти. Аба агымы тоскоолдук кылган. Термостатты калибрлөө маселеси. | Ensure heater matches room size (up to 150 sq ft). Торчолордон тоскоолдуктарды алып салыңыз. Recalibrate or replace thermostat. |
| Иштөө учурунда адаттан тыш жыттар. | Initial burn-off of manufacturing residues. Жылытуу элементинде чаңдын топтолушу. | Ensure ventilation; odor should dissipate. Clean heater as per maintenance section. |
If the problem persists after attempting these solutions, contact Stelpro customer support or a qualified electrician.
Техникалык шарттар
| Өзгөчөлүк | Деталь |
|---|---|
| Бренд | Stelpro |
| Модель номери | ASHC1502WCW |
| Ватtage | 1500 Вт (240 В чыңалууда) / 1125 Вт (208 В чыңалууда) |
| Тtage | 240 вольт |
| Ampөчүрүү | 6.25 Amps |
| Продукциянын өлчөмдөрү (D x W x Y) | 3.94" x 28.63" x 17.56" (101 мм x 727 мм x 446 мм) |
| Элемент Салмагы | 15.7 фунт |
| Жылытуу каптоо | Up to 150 sq feet |
| Өзгөчөлүктөр | Energy Efficient, Fast Heating, Noiseless |
| Форма фактору | Кабинет |
| Түс | Ак |
| Монтаж түрү | Дубалга орнотуу |
| Күйүүчү май түрү | Электр |
| Ички/тышкы колдонуу | Indoor |
| UPC | 626296203491 |
Кепилдик
The Stelpro Ultra-Quiet Wall Convector Heater (Model ASHC1502WCW) is backed by a comprehensive warranty:
- 5 жылдык чектелген кепилдик бүт бирдиги боюнча.
- Өмүр бою кепилдик жылытуу элементинде.
- 3 жыл кепилдик on electronic components.
Please retain your proof of purchase for warranty claims. For full warranty terms and conditions, refer to the documentation included with your product or visit the official Stelpro webсайт.
Колдоо
For technical assistance, warranty inquiries, or to purchase replacement parts, please contact Stelpro customer service.
You can find more information and contact details on the official Stelpro webсайт: Visit the Stelpro Store on Amazon
When contacting support, please have your model number (ASHC1502WCW) and proof of purchase readily available.
