GEYA G2R 2P 63A AC110V автоматтык которуу которгучу үчүн колдонмо

Introduction

This manual provides essential information for the safe and effective installation, operation, and maintenance of your GEYA G2R 2P 63A AC110V Automatic Transfer Switch. Please read this manual thoroughly before installation and use, and retain it for future reference.

Коопсуздук маалыматы

ЭСКЕРТҮҮ: Electrical shock hazard. Installation and servicing must be performed by qualified personnel only. Disconnect all power sources before working on the switch.

• Бааланган томду камсыз кылууtage and current of the switch match your application.
• Ар дайым жергиликтүү электр эрежелерин жана эрежелерин сактаңыз.
• Эгер өчүргүч бузулуп калса иштетпеңиз.
• The input power supply must be connected in the correct phase sequence.

Продукт бүттүview

The GEYA G2R Automatic Transfer Switch (ATS) is designed to ensure an uninterruptible power supply by automatically switching between a main power source and a backup power source. It features both automatic and manual operation modes and is suitable for DIN rail mounting.

Негизги өзгөчөлүктөрү:

• Номиналдуу ток: 63A
• Rated Voltage: AC 110V
• Кош режимде иштөө: Автоматтык жана кол менен
• Fast Switching: Millisecond-level transfer time (within 50ms)
• Монтаждоо: DIN Rail and Screw Mounting System
• Материал: High-quality PA6 material with 94V-2 flame retardant grade

Продукциянын өлчөмдөрү:

Сүрөт: алдыңкы жана каптал views of the GEYA G2R Automatic Transfer Switch with detailed dimensions in millimeters. The unit measures 108mm in height, 50.5mm in width (2P version), and 70mm in depth.

Орнотуу жана орнотуу

The GEYA G2R ATS supports both DIN rail mounting and screw mounting for flexible installation. Ensure the mounting location is dry, well-ventilated, and free from excessive vibration.

Зымдарды орнотуу боюнча көрсөтмөлөр:

Refer to the wiring diagram below for correct connection. It is crucial that the input power supply is connected in the correct phase sequence.

Image: Detailed wiring diagram for the GEYA G2R ATS. It illustrates connections for backup power neutral wire (1), common power neutral wire (2), common power supply (3), backup power supply (4), load power (5), load output neutral wire (6), DIN-Rail buckle (7), backup power live wire (8), common power live wire (9), closing indication (10), manual operation handle (11), and load output live wire (12). A note emphasizes correct phase sequence for input power.

Тtage Тандоо:

Тийиштүү томду тандаңызtage model for your system. This model is designed for AC 110V systems. Using an incorrect voltage can damage the control circuit.

Image: Voltage selection guide for GEYA G2R ATS. It shows two configurations: G2R-2P-63A-220V for 220/400V systems or one L line 220V, and G2R-2P-63A-110V for 110/220V systems or one L line 110V. A warning advises choosing the correct voltage to prevent coil damage.

Иштөө нускамалары

Иштөө режимдери:

• Автоматтык режим: The switch automatically detects power failures in the main source (I) and transfers the load to the backup source (II) within 50 milliseconds. When the main power is restored, it automatically switches back.
• Кол режими: Use the manual operation handle to select and switch between power sources I and II.

Индикатор жарык абалы:

• When the power supply is under voltage же ашыкчаtage, the indicator light flashes (flashes every two seconds).
• When the power is cut off, the indicator light goes out.
• Green indicator light constantly on: Main power supply is active.
• Red indicator light constantly on: Backup power supply is active.

Операциянын демонстрациялык видеосу:

Video: This video demonstrates the operation of the GEYA ATS, showing how to switch between manual and automatic modes, and how the device automatically transfers power when the main supply is interrupted or restored. It illustrates the indicator light behavior during different power states.

Техникалык тейлөө

The GEYA G2R ATS is designed for durability with a mechanical life of ≥8000 times and an electrical life of ≥1500 times. Regular maintenance is minimal but important for optimal performance.

• Мезгил-мезгили менен бардык зымдарды байланыштарды текшерип, алар бекем жана коррозияга учурабайт.
• Агрегатты таза жана чаңдан жана калдыктардан таза кармаңыз.
• Test the automatic transfer function periodically by simulating a main power failure (if safe to do so and with appropriate precautions).

Проблемаларды чечүү

Техникалык шарттар

Кепилдик жана колдоо

Кепилдик маалыматы же техникалык колдоо үчүн өндүрүүчүнүн расмий өкүлүнө кайрылыңыз website or contact your point of purchase. Keep your purchase receipt for warranty claims.

Manufacturer: GEYA

Кошумча жардам алуу үчүн, баш багыңыз GEYA Store on Amazon.