Nitecore TUP2 1200 люмен кайра заряддалуучу көп түстүү температуралык ачкыч чынжыры фонариги колдонуучунун колдонмосу

1. Киришүү

The Nitecore TUP2 is a compact and powerful rechargeable keychain flashlight designed for everyday carry. It features a maximum output of 1200 lumens, multiple color temperature options (warm, neutral, cool white), an OLED real-time display, and USB-C fast charging. This manual provides detailed instructions for the proper use, maintenance, and care of your TUP2 flashlight.

2. Пакеттин мазмуну

• Nitecore TUP2 Flashlight
• USB-C заряддоо кабели
• Ачкычтын капкагы

Image: The Nitecore TUP2 flashlight, along with its included USB-C charging cable and a Nitecore sticker.

3. Негизги өзгөчөлүктөрү

• Powerful 1200 Lumens Output: Delivers an ultra-bright beam reaching up to 136 yards.
• Multi-Color Temperature LEDs: Easily switch between warm (3000K), neutral white (4500K), and cool white (6500K) lighting.
• OLED Display & Smart Interface: Real-time screen shows brightness, color temperature, remaining runtime, and battery status.
• USB-C Fast Charging: Built-in rechargeable battery charges fully in under 1.5 hours.
• Compact & Durable Design: Measures only 2.76" and weighs 2.05 oz; IP54 water-resistant and impact-resistant up to 2 meters.

Image: The Nitecore TUP2, emphasizing its Multiple Color Temperatures (MCT) and 1200 lumen output.

Image: A visual representation of the TUP2's four LEDs, capable of producing three distinct color temperatures: 3000K Warm Light, 4500K Neutral White, and 6500K Cool White.

Image: The OLED display of the Nitecore TUP2, illustrating its ability to show real-time information such as current color temperature, unlock prompts, battery level, current brightness level, remaining runtime, and lockout mode status.

4. Иштөө нускамалары

4.1 Күйгүзүү/өчүрүү

• Күйгүзүү: Short press the Power Button ().
• Өчүрүү: Short press the Power Button () while the light is on.

4.2 жарыктык деңгээли

Жарык күйүп турганда, Mode баскычын кыска басыңыз () to cycle through brightness levels: ULTRALOW - LOW - MID - HIGH.

4.3 Түздөн-түз жетүү режимдери

• ULTRALOW: Жарык өчүп калганда, Кубат баскычын узакка басып коюңуз () to directly access ULTRALOW mode.
• ТУРБО: When the light is on, long press the Mode Button () to directly access TURBO mode.

Image: The Nitecore TUP2 demonstrating direct access to its TURBO mode (1200 lumens) for long-distance lighting and ULTRALOW mode (1 lumen) for close-range illumination.

4.4 Color Temperature Switching

When the light is on, press and hold both the Mode Button () and Power Button () simultaneously to cycle through the three color temperatures: Warm (3000K), Neutral White (4500K), and Cool White (6500K).

4.5 Локаут режимдери

The TUP2 features two lockout modes to prevent accidental activation.

• Жарым кулпу режими: Жарык өчүп турганда, Кубат баскычын басып, кармап туруңуз () until "SEMI LOCK" appears on the OLED display. In this mode, only direct access to TURBO is available.
• Толук кулпу режими: When the light is off, press and hold both the Mode Button () and Power Button () simultaneously until "FULL LOCK" appears on the OLED display. All buttons are locked.
• Кулпуну ачуу үчүн: In either lockout mode, press and hold both the Mode Button () and Power Button () simultaneously until the display shows the current battery level.

Image: The Nitecore TUP2's dual-button interface, detailing the Mode and Power buttons, and explaining the Semi Lockout and Full Lockout modes for secure carrying or storage.

4.6 Расмий продукт Videos

5. Заряддоо

The Nitecore TUP2 features a built-in rechargeable battery with USB-C fast charging capability.

• Заряддоо порту: The USB-C charging port is located on the side of the flashlight, protected by a rubber cover.
• Заряддоо процесси: Connect the provided USB-C cable to the flashlight and a power source. The OLED display will show the charging status and battery level.
• Заряддоо убактысы: Толук кубаттоо болжол менен 1.5 саатты талап кылат.
• Заряддоо көрсөткүчү: The OLED display provides real-time battery status during charging.

Image: The Nitecore TUP2 being charged via its USB-C port, with an emphasis on the protective cover for water, dust, and impact resistance.

6. Техникалык шарттар

The following table outlines the technical data for the Nitecore TUP2 flashlight, measured according to ANSI/PLATO FL 1-2019 standards using a built-in 1,300mAh Li-ion battery in a 26°C (79°F) ambient environment.

Note: The stated data is measured using the built-in Li-ion battery (1,300mAh) in accordance with international flashlight testing standards. Data may vary in real-world use due to different environmental conditions.

Image: A table displaying the technical specifications of the Nitecore TUP2, including lumen output, runtime, beam distance, and impact resistance across different lighting modes (Turbo, High, Mid, Low, Ultralow).

6.1 Кошумча спецификациялар

• Материал: Алюминий
• Жарык булагы түрү: LED
• Кубат булагы: Батарея менен иштейт (1 литий-иондук батарейка камтылган)
• Продукциянын өлчөмдөрү: 1.06"D x 1.18"W x 2.76"H
• Элемент Салмагы: 2.08 унция

7. Техникалык тейлөө

To ensure the longevity and optimal performance of your Nitecore TUP2 flashlight, follow these maintenance guidelines:

• Тазалоо: Wipe the flashlight body with a clean, soft cloth. Avoid using harsh chemicals or abrasive materials.
• Заряддоо порту: Keep the USB-C charging port clean and free of debris. Ensure the rubber cover is properly sealed when not charging to maintain water resistance.
• Сактагыч: Store the flashlight in a cool, dry place away from direct sunlight and extreme temperatures. Recharge the battery periodically if not used for extended periods to prevent deep discharge.

8. Кыйынчылыктарды

If you encounter any issues with your Nitecore TUP2, please refer to the following common troubleshooting steps:

• Кол чырак күйбөй жатат: Check if the flashlight is in lockout mode. Refer to section 4.5 for unlocking instructions. Ensure the battery is charged.
• Заряддалбай жатат: Verify that the USB-C cable is securely connected to both the flashlight and the power source. Try a different USB-C cable or power adapter.
• Кыскартылган жарык чыгаруу: This may indicate a low battery. Recharge the flashlight. If the issue persists after a full charge, contact customer support.
• OLED дисплей иштебейт: Ensure the flashlight is charged. If the display remains unresponsive, contact customer support.

9. Кепилдик жана колдоо

The Nitecore TUP2 comes with a Limited Warranty. For specific warranty terms and conditions, please refer to the warranty card included in your package.

For further assistance, technical support, or to explore other Nitecore products, please visit the official Nitecore store:

Visit the Nitecore Store