Walfront LM35 Temperature Sensor Module User Manual

1. Киришүү

This manual provides detailed instructions for the Walfront LM35 Temperature Sensor Module. It is designed for electronics enthusiasts, students, engineers, and technicians involved in DIY projects, learning, and development. The module offers precise analog temperature measurement and is compatible with various microcontrollers.

2. Продукт бүтүп калдыview

The Walfront LM35 Temperature Sensor Module is a dedicated temperature sensing unit built on a PCB. It provides an analog output signal directly proportional to the Celsius temperature. Its compact design includes four mounting holes for easy integration into projects.

2.1-сүрөт: Жогорку view of the Walfront LM35 Temperature Sensor Module, showing the LM35 sensor, C1 capacitor, and the 3-pin header (S, VCC, GND).

Негизги өзгөчөлүктөрү:

• Precise Linear Output: Delivers an analog output with a linear relationship to Celsius temperature. Output starts at 0V for 0°C and increases by 10mV for every 1°C rise.
• Жогорку шайкештик: Fully compatible with single-chip microcontrollers and integrates seamlessly with sensor expansion boards via its connection port.
• Оңой орнотуу: Equipped with four positioning holes for effortless and secure fixing to other devices or project boards.
• Ишенимдүү аткаруу: Designed for high reliability and long-term stability, ensuring consistent performance in various environments.
• Ар тараптуу колдонмо: Suitable for educational purposes, prototyping, and integration into various electronic projects.

3. Техникалык шарттар

4. Орнотуу нускамалары

Follow these steps to set up your Walfront LM35 Temperature Sensor Module:

1. Пиндерди аныктоо: The module has three pins:
   • S (Signal): Analog output pin.
   • VCC: Power supply input (3.3V - 5V DC).
   • GND: Жерге туташтыруу.
   

   4.1-сүрөт: Жакын план view of the module showing the S, VCC, and GND pin labels.

2. Туташуу кубаты: Connect the VCC pin to a 3.3V or 5V DC power source on your microcontroller or development board. Connect the GND pin to the ground of your power source and microcontroller.
3. Байланыш сигналы: Connect the S (Signal) pin to an analog input pin on your microcontroller (e.g., A0 on an Arduino).
4. Монтаждоо (кошумча): Use the four mounting holes to securely attach the module to your project enclosure or breadboard using appropriate screws or standoffs.

5. Иштөө нускамалары

Once the module is connected, you can read temperature data using your microcontroller. The LM35 sensor provides an output voltage that is linearly proportional to the Celsius temperature.

Temperature Calculation:

The LM35 output is 10mV per degree Celsius. To convert the analog reading from your microcontroller to temperature in Celsius:

1. Read Analog Value: Read the analog value from the connected analog input pin. This value will typically range from 0 to 1023 for a 10-bit ADC.
2. Convert to Voltage: Convert the analog reading to voltage using the reference voltage of your microcontroller's ADC.

   Тtage (V) = (Analog Reading / ADC Resolution) * Reference Voltage

   Example for Arduino (5V reference, 10-bit ADC): Voltage (V) = (Analog Reading / 1024) * 5.0
3. Calculate Temperature: Томду айландырууtage to Celsius temperature.

   Temperature (°C) = Voltage (V) * 100

   (Since 10mV = 0.01V per °C, then 1V = 100°C)

Example (Ардуино кодунун концептуалдык үзүндүсү):

const int LM35_PIN = A0; // Analog pin connected to LM35 signal
void setup() {
  Serial.begin(9600);
}
void loop() {
  int analogValue = analogRead(LM35_PIN);
  float voltage = (analogValue / 1024.0) * 5.0; // Assuming 5V reference
  float temperatureC = voltage * 100.0;
  Serial.print("Temperature: ");
  Serial.print(temperatureC);
  Serial.println(" °C");
  delay(1000);
}

6. Техникалык тейлөө

The Walfront LM35 Temperature Sensor Module is designed for long-term stability and requires minimal maintenance. To ensure optimal performance:

• Тазалыкты сактоо: Ensure the module and sensor element are free from dust, dirt, and moisture. Use a soft, dry cloth for cleaning if necessary.
• Физикалык стресстен качыңыз: Do not apply excessive force or bend the pins, as this can damage the module.
• Туура сактоо: When not in use, store the module in a dry, anti-static environment to prevent damage from static discharge or environmental factors.
• Электр камсыздоо: Always use a stable and regulated power supply within the specified working voltage диапазону (3.3V-5V DC).

7. Кыйынчылыктарды

8. Колдоо жана байланыш

For further assistance, technical support, or inquiries regarding the Walfront LM35 Temperature Sensor Module, please refer to the official Walfront support channels or contact your retailer.

You may also find additional resources and community support through online electronics forums and microcontroller development communities.