Gyroor KS2 балдар үчүн электр скутери, LED жарыгы менен колдонуу боюнча колдонмо

1. Introduction and Overview

This manual provides essential information for the safe and efficient operation of your Gyroor KS2 Kids Electric Scooter. Please read it thoroughly before first use and retain it for future reference. The Gyroor KS2 is designed for children aged 6-12, featuring a safe maximum speed, adjustable handlebar, and vibrant LED lights for an engaging riding experience.

Image 1: The Gyroor KS2 Kids Electric Scooter, showcasing its sleek design and LED lighting capabilities.

2. Коопсуздук маалыматы

Your safety and the safety of others are paramount. Always wear appropriate safety gear, including a helmet, knee pads, and elbow pads, when operating the scooter. Adult supervision is recommended, especially for younger riders.

• UL2272 тарабынан тастыкталган: The scooter is UL2272 certified, ensuring compliance with electrical safety standards.
• Коопсуз ылдамдык: The maximum speed is limited to 5 MPH, suitable for young riders.
• Smart Start: The motor engages only after the scooter reaches 2 MPH, preventing accidental acceleration.
• Арткы канат тормозу: Provides intuitive and reliable stopping power.
• Wide Tires & Low Deck: Designed for enhanced stability and balance.

Image 2: Children enjoying their Gyroor KS2 scooters, highlighting the importance of safety gear.

3. Пакеттин мазмуну

Кутучаны ачканда, бардык компоненттердин бар экендигин текшериңиз:

• Gyroor KS2 Electric Scooter (x1)
• Instruction Manual (x1)
• Заряддагыч (x1)
• Чогултуу куралдары (Аллен ачкычтары)

4. Ассамблея

The Gyroor KS2 scooter requires minimal assembly. Follow these steps to prepare your scooter for use:

1. Скутерди ачуу: Gently push down on the folding lever located near the base of the handlebar stem to release the folded position. Raise the handlebar stem until it locks into place.
2. Рулду бекитүү: Insert the handlebar into the top of the stem. Align the holes and secure it using the provided screw and Allen wrench. Ensure it is tightened firmly.
3. Рулдун бийиктигин тууралоо: Тез ачылуучу clamp on the handlebar stem. Press the small button on the stem and slide the handlebar to one of the two available height settings (29.5" or 33.5"). Release the button to lock it in place and re-tighten the quick-release clamp.
4. Deploy Kickstand: Locate the kickstand on the side of the deck and push it down to support the scooter.

Image 3: The adjustable handlebar feature, allowing the scooter to grow with your child.

5. Иштөө нускамалары

Familiarize yourself with the scooter's controls before riding.

5.1 Күйгүзүү/өчүрүү

• Күйгүзүү үчүн: Press and hold the power button on the handlebar display for approximately 3 seconds until the display illuminates.
• Өчүрүү үчүн: Press and hold the power button for approximately 3 seconds until the display turns off.

5.2 Ылдамдык режимдери

The scooter features different speed modes, indicated on the LED display:

• Gear E (Economy): Maximum speed of 5 MPH.
• Gear N (Normal): Maximum speed of 8 MPH.
• Gear S (Sport): Maximum speed of 10 MPH.

To switch between speed modes, briefly press the power button while the scooter is on.

5.3 Foot Sensor Start

The Gyroor KS2 uses a smart foot sensor start. To engage the motor, place one foot on the deck and push off with the other foot to reach a speed of at least 2 MPH. The motor will then activate, maintaining a constant speed based on the selected gear.

Image 4: Illustration of the foot sensor start mechanism on the scooter's deck.

5.4 Тормоздоо

To stop the scooter, simply step down on the rear fender brake with your foot. The LED lights on the side of the deck will illuminate red to indicate braking, enhancing visibility.

Image 5: Close-up of the rear fender brake and the illuminated LED lights during braking.

5.5 LED жарыктары

The scooter features integrated LED lights on the deck and wheels. To turn the lights on or off, press and hold the light button located on the handlebar display.

6. Заряддоо

Ensure the scooter is fully charged before each use for optimal performance.

• Заряддоо порту: The charging port is located on the right side of the scooter's deck, covered by a protective cap.
• Заряддоо процесси: Open the protective cap and insert the charger cable. Plug the charger into a standard wall outlet. The indicator light on the charger will typically show red during charging and turn green when fully charged.
• Заряддоо убактысы: A full charge from empty takes approximately 2 hours.
• Батарея көрсөткүчү: The handlebar LED display shows the current battery level with four bars.

Image 6: Location of the charging port and how to connect the charger.

7. Техникалык тейлөө

Regular maintenance helps prolong the life of your scooter.

• Тазалоо: Скутерди жарнама менен сүртүңүзamp кездеме. Катуу химиялык заттарды же ашыкча сууну колдонуудан алыс болуңуз.
• Шиналарды текшерүү: Periodically check the tires for wear and tear. Ensure they are free from punctures or damage.
• Бекер текшерүү: Regularly inspect all screws and fasteners to ensure they are tight.
• Сактагыч: Скутерди түз күн нурунан жана экстремалдык температурадан алыс салкын, кургак жерде сактаңыз.

8. Кыйынчылыктарды

Эгер кандайдыр бир көйгөйгө туш болсоңуз, көйгөйлөрдү чечүү боюнча төмөнкү жалпы кеңештерге кайрылыңыз:

• Скутер күйбөй жатат: Ensure the battery is charged. Press and hold the power button for 3 seconds.
• Мотор иштебей жатат: Confirm the scooter is powered on and you have pushed off to at least 2 MPH to activate the foot sensor start.
• Жарыктар иштебейт: Check if the lights are turned on by pressing and holding the light button. Ensure the battery has sufficient charge.
• Төмөндөтүлгөн аткаруу: This may indicate a low battery. Charge the scooter fully.

For persistent issues, please contact Gyroor customer support.

9. Техникалык шарттар

10. Кепилдик жана колдоо

The Gyroor KS2 Electric Scooter comes with a 1 жылдык тетиктерге кепилдик жана а Батареяга 6 айлык кепилдик. For warranty claims, technical support, or any questions not covered in this manual, please contact Gyroor customer service through their official website or the retailer where the product was purchased. Please have your proof of purchase and model number (KS2) ready when contacting support.