GOOLOO GT6000 Jump Starter & DS200 OBD2 Scanner User Manual

1. Киришүү

This manual provides detailed instructions for the safe and effective use of your GOOLOO GT6000 6000A Jump Starter and GOOLOO DEEPSCAN DS200 OBD2 Diagnostic Scanner. Please read this manual thoroughly before operating the devices and retain it for future reference.

The GOOLOO GT6000 is a powerful portable jump starter designed to start vehicles with dead batteries, while also serving as a portable power bank. The GOOLOO DEEPSCAN DS200 is a compact OBD2 scanner that connects wirelessly to your smartphone, providing comprehensive vehicle diagnostics and maintenance functions.

Image 1.1: The GOOLOO GT6000 Jump Starter and GOOLOO DEEPSCAN DS200 OBD2 Scanner.

2. Коопсуздук боюнча маанилүү маалымат

Always observe the following safety precautions when using the GOOLOO GT6000 Jump Starter and DS200 OBD2 Scanner to prevent injury or damage to the devices or your vehicle.

• Колдонуудан мурун бардык нускамаларды окуп чыгыңыз.
• Балдар жетпеген жерде сактаңыз.
• Do not expose the devices to rain or extreme temperatures.
• Түзмөктөрдү ажыратпаңыз же өзгөртпөңүз.
• Колдонуу жана кубаттоо учурунда туура желдетүүнү камсыз кылыңыз.
• Wear eye protection when working with vehicle batteries.
• Стартердин кыска туташуусунан алыс болуңузamps.
• Use the jump starter only for 12V lead-acid batteries.

Image 2.1: The GT6000 Jump Starter features multiple safety protections including over-charge, short-circuit, and reverse-polarity protection.

3. GOOLOO GT6000 Jump Starter

3.1. Продукт бүтүп калдыview

The GT6000 is a high-capacity jump starter with a 6000A peak current, capable of starting all gas engines and diesel engines up to 12L. It also functions as a portable power bank with 100W bi-directional fast charging.

Image 3.1: Diagram showing the ports and controls of the GT6000 Jump Starter, including the BOOST button, jump cable socket, DC port, USB output ports, and IN/OUT PD100W port.

Image 3.2: The 3.2-inch LED display on the GT6000 shows battery level, charging power, low current mode, 'Ready to Start' status, low temperature reminder, and battery clips reversed warning.

3.2. Charging the GT6000

Before first use, fully charge the GT6000. It supports 100W bi-directional fast charging. A full charge from 0-100% takes approximately 1.4 hours.

1. Connect the provided USB-C cable to the IN/OUT PD100W port on the GT6000.
2. Connect the other end of the cable to a compatible 100W USB-C power adapter (a 100W car charger is included).
3. LED дисплей кубаттоо абалын жана батарейканын пайызын көрсөтөтtage.

Image 3.3: The GT6000 charging, indicating 100W super fast charging capabilities.

3.3. Operating the Jump Starter

Follow these steps to jump-start a vehicle with a dead battery:

1. Кыстаруу: Insert the smart jumper cable plug into the jump cable socket on the GT6000. Ensure a secure connection.
2. Туташуу: кызыл cl туташтырууamp унаанын аккумуляторунун оң (+) терминалына жана кара clamp to the negative (-) terminal. Ensure the clamps are firmly attached. If the LED display shows "Battery Clips Reversed", recheck the connections.
3. Баштоо: Once the GT6000 display shows "READY", start your car engine. If the engine does not start immediately, wait 20-30 seconds and try again. Do not attempt more than 3 consecutive jump starts.
4. Алып салуу: Унааны от алгандан кийин, розеткадан сууруп алыңызamps from the car battery first, then remove the jumper cable from the GT6000.

Image 3.4: Visual guide for the three steps to jump start your vehicle using the GT6000.

3.4. Power Bank катары колдонуу

The GT6000 can charge various electronic devices via its USB output ports and the bi-directional USB-C port.

• Connect your device's charging cable to one of the GT6000's output ports (5V/2.4A, 5V/9V/12V, or IN/OUT PD100W USB-C).
• The GT6000 will automatically begin charging your device.

Image 3.5: The GT6000 functioning as a portable power bank, charging a laptop and smartphone.

3.5. LED Flashlight Functions

The GT6000 includes an integrated LED flashlight with multiple modes:

• Normal Light: Фонарьды күйгүзүү үчүн кубат баскычын 3 секунд басып туруңуз.
• Strobe Light: Стробоскоп режимине өтүү үчүн кубат баскычын кайра кыска басыңыз.
• SOS сигналы: Short press the power button a third time to activate the SOS signal mode.
• Өчүрүү: Short press the power button a fourth time or press and hold for 3 seconds to turn off the flashlight.

3.6. GT6000 Specifications

4. GOOLOO DEEPSCAN DS200 OBD2 Scanner

4.1. Продукт бүтүп калдыview

The DS200 is a wireless Bluetooth OBD2 scanner designed for comprehensive vehicle diagnostics. It connects to your smartphone via an app and supports full system diagnostics, bidirectional control, and various maintenance services.

4.2. Setup & App Installation

To begin using your DS200 scanner, you need to download and install the GOOLOO DEEPSCAN app on your smartphone.

1. Колдонмону жүктөп алуу: Издөө "GOOLOO DEEPSCAN" in the Apple App Store (for iOS devices) or Google Play Store (for Android devices).
2. Колдонмону орнотуу: Тиркемени жүктөп алып, орнотуңуз.
3. Катталуу/Кирүү: Follow the in-app instructions to register an account or log in if you already have one.

Image 4.1: The DS200 scanner and instructions for downloading the GOOLOO DEEPSCAN app from app stores.

4.3. Connecting to Your Vehicle

The DS200 connects to your vehicle's OBD2 port, typically located under the dashboard on the driver's side.

1. Locate your vehicle's 16-pin OBD2 port.
2. Plug the DS200 scanner firmly into the OBD2 port. The scanner will power on automatically.
3. Turn on your vehicle's ignition (engine off or running, depending on the diagnostic task).
4. Open the GOOLOO DEEPSCAN app on your smartphone and follow the prompts to connect to the DS200 via Bluetooth.

Image 4.2: The DS200 scanner connected to a vehicle's OBD2 port, displaying diagnostic information on a smartphone.

4.4. Basic Diagnostic Functions

Once connected, the DS200 app provides access to standard OBD2 functions:

• Окуу коддору: Retrieve Diagnostic Trouble Codes (DTCs) from the vehicle's Engine Control Unit (ECU).
• Таза коддор: Erase DTCs and turn off the Check Engine Light (MIL) after repairs.
• Жандуу маалыматтар: View real-time sensor data, such as engine RPM, vehicle speed, coolant temperature, and fuel system status.
• I/M даярдыгы: Check the status of emission-related monitors to ensure the vehicle is ready for an emissions test.
• Кадр дайындарын тоңдуруп коюу: View эмиссияга байланыштуу ката кеткенде жазылган сенсор маалыматтарынын сүрөтү.
• Унаа жөнүндө маалымат: Retrieve vehicle identification number (VIN), calibration ID, and calibration verification numbers (CVN).

Image 4.3: The DS200 app interface displaying various full OBD functions like Read Code, Clear Code, O2 Sensor Test, and Live Data.

4.5. Advanced Diagnostic Functions

The DS200 offers advanced features for in-depth vehicle analysis:

• Толук системалык диагностика: Scan all available electronic control units (ECUs) in the vehicle, including Engine, Transmission, ABS, SRS, BCM, etc., to read and clear fault codes.
• Эки тараптуу башкаруу: Perform active tests to control various vehicle components (e.g., turn on/off wipers, headlights, fuel pump) to verify their functionality.
• Тейлөө кызматтары: Access common maintenance functions such as Oil Reset, Throttle Adaptation, EPB Reset, Steering Angle Resets, DPF Regeneration, ABS Bleeding, BMS Reset, and Airbag Reset.
• Vehicle Performance Test: Conduct tests to evaluate vehicle performance metrics like acceleration time, top speed, and engine load.

Image 4.4: The DS200 app interface listing 8 common maintenance services available for various vehicle systems.

Image 4.5: The DS200 app demonstrating bidirectional control, allowing users to troubleshoot faults by controlling components like wipers, mirrors, and headlights.

4.6. DS200 Specifications

5. Кароо жана тейлөө

Proper care ensures the longevity and optimal performance of your GOOLOO devices.

• Тазалоо: Use a soft, dry cloth to clean the exterior of both devices. Do not use abrasive cleaners or solvents.
• Сактагыч: Store the devices in a cool, dry place away from direct sunlight and extreme temperatures. For the GT6000, ensure it is charged to at least 50% before long-term storage and recharge every 3-6 months.
• Колдонуу: Түзмөктөрдү түшүрүүдөн же катуу таасирлерге дуушар кылуудан качыңыз.
• Кабелдер: Inspect jumper cables and OBD2 connector for any damage before each use. Replace if frayed or damaged.

6. Кыйынчылыктарды

6.1. GT6000 Jump Starter Issues

• Түзмөк күйбөй жатат: Түзмөктүн кубатталганын текшериңиз. Кубат баскычын бир нече секунд басып туруңуз.
• Унаа от албай жатат:
  • cl экенин текшериңизamps туура батарея терминалдарына бекем туташтырылган.
  • GT6000 жетиштүү заряддалганын текшериңиз.
  • If the battery is severely discharged, press the BOOST button on the GT6000 (if available and safe to do so, refer to specific product instructions for boost mode).
  • The vehicle battery might be completely dead or damaged and require replacement.
• "Battery Clips Reversed" error: Ажыратуу clamps and reconnect them to the correct positive (+) and negative (-) terminals.

6.2. DS200 OBD2 Scanner Issues

• Сканер күйбөй жатат: Ensure the DS200 is fully plugged into the vehicle's OBD2 port and the vehicle's ignition is on.
• Bluetooth аркылуу туташуу мүмкүн эмес:
  • Смартфонуңузда Bluetooth иштетилгенин текшериңиз.
  • Restart the GOOLOO DEEPSCAN app.
  • Unplug and re-plug the DS200 from the OBD2 port.
  • Check if the app requires location permissions, as some Bluetooth functions do.
• ЭБУ менен байланыш жок:
  • Унаанын от алдыруу системасы күйүк экенин текшериңиз.
  • Ensure the DS200 is securely connected to the OBD2 port.
  • Confirm your vehicle is OBD2 compliant (most vehicles from 1996 onwards).
  • Try scanning a different vehicle to rule out scanner malfunction.

7. Кепилдик жана Кардарларды колдоо

GOOLOO products are designed for reliability and performance. For warranty information, technical support, or any questions regarding your GT6000 Jump Starter or DS200 OBD2 Scanner, please refer to the official GOOLOO webсайтка же түздөн-түз кардарларды тейлөөгө кайрылыңыз.

Please have your product model number (GT6000, DS200) and purchase information ready when contacting support.