AtomStack F03-0329-0AA1 Swift
Техникалык шарттар
- Продукт аты: AtomStack Swift
- Модель номери: F03-0329-0AA1
- Версия: B
- Кубат киргизүү: DC 24V
- Порттор: Type-C Port (For PC Connection), Expansion Port (for Chuck, Roller, and Other Accessories)
- Статус көрсөткүчү: Solid blue when working
Продукт колдонуу нускамалары
Бөлүктөр тизмеси:
- X огу жыйындысы
- Сол Y огунун жыйындысы (мотор менен)
- Оң Y огунун жыйындысы
- Кубаттуу адаптер
- Llave fija (Fixed wrench)
Getting to Know AtomStack Swift:
Familiarise yourself with the different assemblies and parts of the AtomStack Swift, including the X-axis assembly, left and right Y-axis assemblies, power adapter, and optical shaft.
How to Install Swift:
- Place the five assemblies as shown in the diagram. Ensure the X-axis assembly belt faces downward, and the Y-axis assembly with the motor is on the left.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley. Ensure it is fully inserted and aligned parallel with the front X-axis assembly.
- If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
Бөлүктөр тизмеси
Getting to Know AtomStack Swift
How to install Swift
- Place the five assemblies as shown in the diagram.
Эскертүү: The X-axis assembly should have the belt facing downward, and the Y-axis assembly with the motor should be on the left. - Align and connect the five assemblies, then secure them using six M5×8 screws.
- Install the optical shaft onto the X-axis. Push the X-axis toward the front X-axis assembly with both hands, then tighten the coupling and timing pulley.
(Ensure it is fully inserted and aligned parallel with the front X-axis assembly)
- Install the laser module and tighten the thumb knob.
Эскертүү:
If the hand-tightened screw interferes with the optical axis, simply pull out the black part and rotate it downward again.
- Connect the motor cable, limit switch cables, and laser cable as shown in the diagram to complete the installation.
Фокустоо ыкмасы:
Place the workpiece. Turn the focusing knob downward and loosen the thumb screw. Let the laser module drop until the knob touches the material. Tighten the screw to fix the module, then return the knob to its original position.
Кеңеш:
When placing the material, use the X/Y axis scale lines for alignment. When using “Absolute Coords” mode in the software, the design will align with the material’s position.
- If the engraving quality deteriorates after prolonged use, adjust the eccentric nuts with the open-end wrench to improve it.
- Use the open-end wrench to adjust the eccentric nuts on the left and right Y-axes.
- Adjust them so that when the machine is tilted at a 45° angle, as shown, the X-axis slides down slowly and evenly.
ATOMSTACK Official Recommended Software
Mobile App Download Method：
Компьютердик программаны жүктөө ыкмасы:
AtomStack Studio жүктөө шилтемеси: https://atomstack.com/pages/atomstack-studio-software
- Official Download Link
https://atomstack.com/pages/atomstack-studio-software - Жүктөп алуу үчүн скандоо
Программалык камсыздоо ресурстары
LightBurn
Unofficial software. Requires a separate purchase
Lightburn программасын жүктөп алуу ыкмасы: Жүктөө шилтемеси: https://lightburnsoftware.com/pages/download-trial
- Scan to download the configuration file “AtomStack_Swift_Vxxx.lbdev”
- LightBurn программасын ачып, төмөнкүнү тандаңыз: Түзмөктөр – Импорттоо
-
Select “AtomStack_Swift_Vxxx.lbdev”, click “Open”, then “OK”. In the bottom right corner, select “AtomStack Swift”.
The machine will beep once to confirm the connection.
Эскертүү: If adding the device manually, set the “Baud Rate” in “Device Settings” to 460800
Колдонуучунун колдонмосу
Биз менен байланышыңыз
Scan the QR code for more information:
- Unboxing & First Use
- Use with the AtomStack APP
- Проблемаларды чечүү
- Техникалык тейлөө
Кардарларды тейлөө:
- For the detailed warranty policy, please visit our official webсайт: www.atomstack.com
- Техникалык колдоо жана тейлөө үчүн электрондук почта дарегин: support@atomstack.com
Өндүрүүчү:
Shenzhen AtomStack Technologies Co., Ltd.
Индекс: 518172
Дарек:
17-кабат, 3А корпусу, II фаза, Интеллектуалдык парк, №76, Баохэ проспектиси, Баолон көчөсү, Лонгган району, Шенчжэнь, Гуандун, Кытай.
Complies with 21 CFR 1040.10 and 1040.11 except for conformance with IEC60825-1 E, 3., as described in Laser Notice No.56, dated May 8, 2019.
Көп берилүүчү суроолор
Орнотуу учурунда көйгөйлөр пайда болсо, эмне кылышым керек?
If you face any difficulties during installation, refer to the video tutorial available on the official webсайтка же жардам үчүн кардарларды тейлөөгө кайрылыңыз.
Документтер / Ресурстар
 |
ATOMSTACK F03-0329-0AA1 AtomStack Swift [pdf] Колдонуучунун колдонмосу F03-0329-0AA1, A5 V3, F03-0329-0AA1 AtomStack Swift, F03-0329-0AA1, AtomStack Swift, Swift |