DURATECH LINK Mini Control Unit User Manual

DURATECH LINK Mini Control Unit User Manual

DURATECH-LOGO

DURATECH LINK Mini Control Unit

DURATECH-LINK-Mini-Control-Unit-PRODUCT

Quick Setup & Use

  1. Open the device by unscrewing the 4 torx screws.
  2. Mount the unit to the wall using the screws provided in the packaging.
  3. Connect wiring to the corresponding connectors (RS485: 0.2–1 mm²; 230V: 1–4 mm²; 12V: 1–4 mm²; solid or stranded).
  4. Control options: use the OneTouch button (short press = ON/OFF toggle; long press >10 s = reset Bluetooth) or control via the DuraCloud app using Bluetooth (BLE).
  5. To set up in the app: open the DuraCloud app → Devices → find and tap your controller → Settings (select lamp model) → control from the dashboard.

КИРИШҮҮ

About LINK-MINI

  • This swimming pool control cabinet is designed for the control of pool lights. During its development, a focus was placed on a clear and installer-friendly layout, with all connection points easily accessible and logically arranged.
  • This simplifies cable installation and reduces the risk of wiring errors.
  • The control cabinet is suitable for use in combination with our Duravision lighting. In addition, the cabinet is equipped with an RS485 connection for communication with external systems or DMX. The control cabinet can be connected to the Duracloud app.
  • The app can be downloaded via QR code by scanning the sticker located on the side of the LINK-MINI as shown in the illustration below. This manual describes the operation, connections, and installation requirements of the control cabinet.

Коробканын ичинде

  • LINK-MINI unit
  • Бурамалар жана сайгычтар
  • Ыкчам баштоо колдонмосуDURATECH-LINK-Mini-Control-Unit-FIG-1

ТЕХНИКАЛЫК СИПАТТАМАЛАР

МӨНДӨМӨЛӨРҮ LINK-MINI
Type of control DURAVISION ON/OFF & Duranet
DURA Cloud App ООБА
Bluetooth BLE ООБА
Wi-Fi 2,4 Ghz ООБА
Номиналдык киргизүү тtage 230 VAC 50 Гц
Трансформатордун VA рейтинги 60 VA
Чыгуу томtage (SELV) 12 VAC SELV
IEC коргоо классы КЛАСС II
IP класс 54
Unit dimensions (L*W*H) 150*157*51 мм
Таза салмак 1,2 кг
Ambient temp operating 0-40 °C
КОННЕКТОР MM² ЗЫМ
RS485 0,2-1 solid & stranded
230V 1-4 solid & stranded
12V 1-4 solid & stranded

ОРНОТУУ

  • Open the device by unscrewing the 4 torx screws
  • Mount to wall with the screws provided in the packaging.

Керектүү куралдар:

  • Бургу диаметри 5,5 мм
  • Drilling/screw machine
  • Рух деңгээли
  • Карандаш
  • Torx битDURATECH-LINK-Mini-Control-Unit-FIG-2

Кабелдик байланышDURATECH-LINK-Mini-Control-Unit-FIG-3

КОННЕКТОР MM² ЗЫМ
RS485 0,2-1 solid & stranded
230V 1-4 solid & stranded
12V 1-4 solid & stranded

БИР ТИЙҮҮ БАШКАРУУ

You can control the swimming pool lamp controller in two ways:

  • With the OneTouch button on the device
  • With the DuraCloud app (Bluetooth / BLE)

OneTouch button (on the device)

  • The touch button is located in the center of the LED ring.DURATECH-LINK-Mini-Control-Unit-FIG-4
  • КУЧ ЖОК
  • LED WHITE ROTATING: BOOTING
  • LED WHITE SOLID: IDLE
  • LED GREEN ROTATING: ACTIVE
  • LED RED BLINKING: ALARM
  • BLUE TRIPLE BLINKING: BLUETOOTH RESET
  • BLUE SOLID: BLUETOOTH CONNECTED TO APP
  • Кыска басуу: l буруңузamps ON/OFF (toggle)
  • Long press (more than 10 seconds): Reset the Bluetooth (BLE) connection
  • Use this if the controller won’t connect to the app.

DuraCloud app (BLE)

The DuraCloud app lets you set up and control the controller using Bluetooth (BLE)

  1. Find your controller
    1. Open the DuraCloud app.
    2. Түзмөктөр бөлүмүнө өтүңүз.
    3. Find your controller in the list.
    4. Tap your controller to open it.DURATECH-LINK-Mini-Control-Unit-FIG-5
  2. Орнотуулар
    • Open Settings in the upper right corner and select the lamp модель.DURATECH-LINK-Mini-Control-Unit-FIG-6
  3. Control and configure
    • From the dashboard, you can control the lamps and see the current status.

БҮЗГӨЛҮКТӨРДҮ ТҮЗҮҮ

  • Lamp does not react to color change requests via app
    • Check if the correct lamp model is selected. Each DuraVision lamp has different features.
  • Lamps are not synced (each lamp shows different color)
    • Текшерүү lamp модель
    • Lamps supporting sync, sync via app
  • Cannot detect device via bluetooth
    • Check the color of led circle. If blue, the device is already connected to another app.
    • Long-press the one-touch button to reset bluetooth connection.
    • Check if bluetooth is enabled on the phone.DURATECH-LINK-Mini-Control-Unit-FIG-7

Байланыш маалыматтары

  • Propulsion Systems BV
  • Dooren 72
  • 1785 Мерхтем, Бельгия
  • Тел +32 2 461 02 53
  • Факс +32 2 706 59 60
  • www.duratech.be
  • info@duratech.be
  • Биз алдын ала эскертүүсүз бул документтин мазмунун толугу менен же бир бөлүгүн өзгөртүү укугуна ээбиз.DURATECH-LINK-Mini-Control-Unit-FIG-8

Документтер / Ресурстар

PDF thumbnailLINK Mini Control Unit
User Manual · LINK Mini Control Unit, Mini Control Unit, Control Unit

Шилтемелер

Суроо бериңиз

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Суроо бериңиз

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.