EasySMX 2025 Gamepad Controller Колдонуучунун колдонмосу

Connect the gamepad controller to the PC using a USB type C cable. The device will be playable as soon as it is connected via cable (plug & play) and turned on using the START (+) button.
Муну өткөрүп жиберүү сtagЭгер сиз аппаратты Bluetooth байланышы аркылуу колдонууну кааласаңыз да, туура драйверлердин орнотулбай калышына алып келиши мүмкүн.

Bluetooth жупташтыруу режими
Контроллердин жупташтыруу режимин иштетүү үчүн:
- Контроллер өчүк болгондо:
- Press and hold “B” + HOME button (house icon).
- Эң жогорку көк индикатор жарыгы күйө баштайт.
- Once a pairing connection has been established successfully, the indicator light’s flashing will stop and the top indicator light will stay on (steady light).
  Бирок контроллерди компьютерге Bluetooth аркылуу туташтыруу үчүн (2.4G Dongle менен же болбосо), аппаратты туура каттоо үчүн кошумча кадамдарды жасашыңыз керек:
- Windows 11 PC менен жупташуу
  Tested on Lenovo and Asus laptops during 2023-2025
  To open Bluetooth Settings:
- Press Win + A key (on the keyboard).
- Select the arrow beside the Bluetooth icon .
- Select “More Bluetooth settings”.
- Киргизүү "View more devices”.
- A new window will open, called “Devices”.
Make sure the PC’s Bluetooth is on , and that the gamepad controller is off (no indication lights or button backlights should be on).
If the controller is on during device removal or just before Bluetooth pairing, it will interfere with the “Add device” feature later.
If it refuses to turn off, and there is no designated power button: try turning off the PC’s Bluetooth until the controller turns off automatically. Or, take the gamepad to a farther room to lose connectivity, which will result in it turning off automatically.

In the “Devices” window, search for a device called “Gamepad”.
Select the device name, then select “Remove”.
Эгерде бул сtage is skipped, the controller will be registered as a cable-connected device only, and the PC won’t recognise it as a Bluetooth device.
Also, take into account that skipping stage 1 туура драйверлердин орнотулбай калышына алып келиши мүмкүн.
In the “Devices” window, select the blue button “Add device”.
Make sure the controller is turned off, and then select “Bluetooth” (the first option).

To activate controller pairing mode:
Press and hold “B” + HOME button (house icon).
Эң жогорку көк индикатор жарыгы күйө баштайт.
The “Gamepad input” option should pop up on the list of available devices:
Эгер контроллеруңуз көрүнбөсө, мурунку кадамдарды кылдаттык менен кайталаңыз.

Select the device name to pair it, then select “Done”.
Once a pairing connection has been established successfully, the indicator lights flashing will stop and the top indicator light will stay on (steady light).
Түзмөк азыр сиздин компьютериңиздин Орнотууларындагы Bluetooth түзмөктөрүнүн тизмесинде биротоло пайда болушу керек. Компьютердин Bluetooth жана контроллер экөө тең күйгүзүлгөндө, контроллер сиз аны күйгүзгөн сайын автоматтык түрдө туташып турушу керек.
Жалпы каталар: контроллер "жеткиликтүү түзмөктөрдө" көрүнбөйт, эгерде 1-4-кадамдар өткөрүп жиберилсе же USB кабели аркылуу туташса.

Заряддоо режими

To enter charging mode:
- Connect the controller via USB type C cable to a power source.
- For instance: a suited charger head, a PC, a designated USB socket, etc.
- All 4 blue indicator lights will turn on and flash slowly while charging.
- When the controller’s battery falls below 20%, an indicator light will flash.

GAMEPAD РЕЖИМДЕРИ

Жеткиликтүү геймпад режимдери: D-Input (эски PC оюндары) же X-Input (заманбап Xbox стандарты).

To switch between D-Input & X-Input gamepad modes:
Turn the controller on, using the START (+) button
Then long-press TURBO (Screenshot) button.
(If using a 3rd party program for managing your controller, it should immediately show up on it.)

A/B/X/Y АРТА ЖАРЫГЫН ЖӨНӨТҮҮ

A/B/X/Y баскычтары 5 жарыктык деңгээли бар арткы жарык менен күйөт (0-4, 0 = Өчүк). Арткы жарыктын жарыктыгын кантип тууралоо керек:

Turn the controller on, using the START (+) button.
Press and hold both Shoulder (Bumper) buttons on the top of the controller (LB & RB, or R1 & L1) + Right Joystick (R3 = RS click), and then use the D-Pad
(Directional Pad) buttons to adjust the lighting of choice:
- D-Pad ↑Up – will increase the brightness,
- D-Pad ↓Down – will decrease the brightness.

To toggle the backlight feature On/Off:
Hold down both Shoulder buttons (LB & RB, or R1 & L1) for 6 seconds.

TURBO
Турбо функциясы каалаган баскычты басып турса, кайра-кайра иштетүүгө мүмкүндүк берет.

Gamepad buttons which can be set to Turbo:
- The Face Buttons: A/B/X/Y
- Both Shoulder (Bumper) buttons: RB & LB, or R1 & L1
- Both Trigger buttons: ZR & ZL, or R2 & L2
Бирок жок (!)
- The D-Pad buttons: ↑→↓←
- Both Joysticks RS & LS and their clickable buttons: R3 & L3

To assign the Turbo function to any controller button

Контроллерди күйгүзүңүз.
Press and hold any button of choice, and then press the Turbo (Screenshot) button to bind them together.
The topmost blue indicator light will flash shortly to indicate the function is active.

Result: every time the button of choice is long-pressed, the same indicator light will flash repeatedly, indicating the action assigned to that button will be repeated as long as the button is held down. Once the press is released, the indicator light will stop flashing.
To deactivate the Turbo function:
Repeat the exact same button presses that were used to set it.

TURBO ↔ SCREENSHOT MODE SWITCH
Турбо жана Скриншот режиминин ортосунда которулуу үчүн:

Press the Right Joystick and the TURBO (Screenshot) button together.

ТИТИРҮҮ
Термелүү интенсивдүүлүгүнүн 5 деңгээли (1-5) бар (0, 25%, 50%, 75%, 100%). Дирилдөөнүн интенсивдүүлүгүн тууралоо үчүн:

Hold the TURBO (Screenshot) button , And adjust using the ↑Up and ↓Down D-Pad buttons.
The controller will vibrate to indicate the current vibration intensity.

MACRO REMAPPING (M-баскычтары)

The Macro buttons are remappable buttons, on the back of the device – M1, M2, M3 & M4.
By default, the M-Buttons are mapped as: M1=B, M2=A, M3=Y, M4=X.
The M1 button in bound to the B button, etc.
[Or in Nintendo Layout: M1=Y, M2=X, M3=B, M4=A.] The M-Buttons can be bound to other physical controller buttons or button press sequences. The sequences are recorded serially (chronologically), or even with specific timings in between button presses.

3rd party controller programs consideration:
The M-Buttons cannot be bound to actions from an external program, since the macro works only to bind physical buttons on the controller itself.

Мисалы үчүнample: it would not be possible to remap the M1 button to activate the numerical 8 key on the PC keyboard.

To restore the factory setting: (if needed)
Long-press M1 together with M2 (or M3 with M4), until a vibration confirms the reset was successful.

M баскычтарын кантип байласа болот

Контроллердин артындагы төрт M-баскычтын бирин башка контроллердин баскычтарына байлоо үчүн 2 режим бар:

1St Mode – Binding A Serial Sequence
1-режим сериялык макро ырааттуулук жазгыч болуп саналат. Бул тандалган M баскычын басканда баскычтардын ырааттуулугун активдештирүүгө мүмкүндүк берет. Ал баскычтар басылган сериялык тартипти жазат.
Мисалы үчүнample: X + Y + Left Shoulder баскычын хронологиялык тартипте иштетүү үчүн M1 баскычын кайра түзө аласыз.

To enter button binding mode:
Press the BACK button (–) and the M-button of choice.
All four indicator lights will turn on, confirming you are in entry mode.
Press and hold the other button/s you wish to bind with it.
You may choose one button, or a combination of buttons.
Press the M-button of choice again, to set the combination you have entered.
2nd Mode – Bind A Time Sensitive Sequence
The 2nd Mode is a time sensitive serial recording macro. It too allows you to bind the activation of a sequence of buttons upon pressing the M-button of choice.
Only this time, the remapped macro is also time sensitive, meaning it will record the time duration between button presses of the combination sequence, and not just the serial order in which the buttons were pressed.
Мисалы үчүнample: X баскычын иштетүү үчүн M2 баскычын кайра түзө аласыз, 3 секунд күтүп, андан кийин Y баскычын иштете аласыз.
To enter button binding mode:
Press the START button (+) and the M-button of choice.
All four indicator lights will turn on, confirming you are in entry mode.
Then, press and hold the other button/s you wish to bind with it.
You may choose one button, or a combination of buttons.
Press the M-button of choice again, to set. This will set the time sensitive sequence you have entered.

ФАБРИКАНЫ КАЛПЫНА КЕЛТИРҮҮ

In the centre of the back, you will find a small hole. Inside is a Factory Reset button, which can be reached using a toothpick.
A successful reset will be followed by a select sound, after which the controller will shut off automatically.

Баскычтардын аталыштары жана функциялары

A/B/X/Y – “Face Buttons”, top-right colourful pad. Also called “Main Buttons” or “Action Buttons”. Most gamepads have the Xbox layout, but some have the Nintendo layout (like this one), where A/B switch places, and X/Y switch too.
Xbox layout: A is bottom, B is right, X is left, Y is top.
Nintendo layout: B is bottom, A is right, Y is left, X is top.
D-Pad – “Directional Pad”, with ↑Up, →Right, ↓Down, ←Left.
It correlates with the Arrow Keys on the PC keyboard.
– “HOME” button (house icon) – power ON. (There is no power OFF button) For more on the HOME button bug in PC, scroll to the end.

– “TURBO (Screenshot)” button, a long press toggles them.
(+) “START” button – Select / Enter.
(–) “BACK” button – ESC (Escape).
Reset Button – in the centre of the back panel (underneath), between M1 & M2.
Indicator Lights – the 4 rows of blue lights (2 in each row), in the centre of the gamepad.
USB type C charging socket – on the top ridge facing forward.

Shoulder (Bumper) Buttons – top edge, single click buttons:
- RB (or R1) – Right Bumper Button
- LB (or L1) – Left Bumper Button
Trigger Buttons – top edge. They’re pressure sensitive like a camera shutter:
- ZR (or R2) – Right Trigger Button
- ZL (or L2) – Left Trigger Button
Joysticks – for 360° angle movement. They can also be clickable when pressed.
- RS – Right Stick, and R3 – RS Click
- LS – Left Stick, and L3 – LS Click
- M-Buttons – “Macro Pad” on the back panel: Also could be called R4 / L4 etc.
- M3 – 1st from the right, default: Y (Nintendo: B)
- M1 – 2nd from the right, default: B (Nintendo: Y)
- M4 – 1st from the left, default: X (Nintendo: A)
- M2 – 2nd from the left, default: A (Nintendo: X)

Аныктама Clarity

Gamepad vs. Controller – there are controllers that are not in the gamepad shape or layout. All gamepads are controllers, not all controllers are gamepads.

2.4G Dongle – an additional device to strengthen the wireless Bluetooth signal.

HOME баскычы "Ката"

– “HOME” button (house icon) – power ON. (There is no power OFF button)

Ката: a webpage will automatically open upon press. Reason: Windows automatically assigns to it the “Browser Home” (non-existent key).

Чечим: – remapping instructions in text and video.

Install the Windows Power Toys from the official Microsoft Store App.
Open it, and select “Keyboard Manager”, then “Open Settings”.
In the new window, toggle “Enable Keyboard Manger” to On.
Under “Keys”, Select “Remap a key”. A new window will open, called “Remap keys”.

Select “Add key remapping”, then under “Select:” press on the field also called “Select”. A pop-up window will open.
Turn on the gamepad, and make sure it is connected to the PC via Bluetooth.
On the gamepad, press the HOME button. The pop-up window will show the key selected is “Browser Home”, select “Okay” to close pop-up.

Back in the “Remap keys” main window, under “To send”, press the “Select” field. A second pop-up will open.
Press a key of your choice to assign to be triggered when HOME is pressed, and in will replace the previous function of the key. For instance, If I want the HOME button on the gamepad to trigger the Escape function, I’ll press the ESC button on the top left corner of my keyboard.
Select “Okay” to close, → “Okay” → “Continue anyway”.
Test the result =D

Көп берилүүчү суроолор

What should I do if my controller doesn't show up on available devices during Bluetooth pairing?

Make sure to carefully follow all the steps mentioned in the pairing instructions. If needed, repeat the process from the beginning to ensure successful pairing.

How can I avoid common errors during the connection process?

Ensure that you do not skip any steps, especially when removing the device or switching between cable and Bluetooth connections. Carefully following each step will help prevent common errors.

Документтер / Ресурстар

EasySMX 2025 геймпад контроллери [pdf] Колдонуучунун колдонмосу
9124, 2025 геймпад контроллери, 2025, геймпад контроллери, контроллер

Шилтемелер

User Manual

EasySMX 2025 геймпад контроллери

Продукт маалыматы

Компьютерге биринчи жолу туташуу