Excellux Mini smart Switch User Manual

Excellux Mini smart Switch

Техникалык шарттар

Продукт Description

• The Zigbee Smart Switch is a versatile device that allows you to control your appliances remotely using a Zigbee network. It features a button for manual control, an indicator LED for status feedback, and supports the Zigbee route function for signal repeating.

Орнотуу ыкмасы:

• Please wire the device according to the markings on the cover. The device operates by controlling the live wire power to turn connected appliances on or off. Ensure proper connection to L and N terminals.

Иштөө принциби:

• Long-press the button for 3 seconds to reset the device. Connect S1 and S2 to the ends of the wall switch, avoiding strong power sources like zero-fire lines. Always turn off AC power before wiring.

Тармак конфигурациясы:

1. Long-press the device button for 3 seconds to enter network discovery mode (rapid LED flashing).
2. In the app, select Gateway and search for the device following the Zigbee Gateway/APP manual instructions.
3. Note: Zigbee devices require a connection to a Zigbee gateway for data upload to the server/app.

Продукт колдонуу нускамалары

1. Ensure proper wiring as per markings.
2. Use the button for manual control or reset by long-pressing for 3 seconds.
3. Connect S1 and S2 to the wall switch ends only.
4. Turn off AC power before wiring.
5. Follow the network configuration steps for connecting to the Zigbee gateway.

Please read the manual carefully and use the product correctly Thank you for purchasing and using this product. Before using the product, please read the manual carefully and use the product correctly. * The pictures in this manual are used to guide the user’s operation and are for reference only. Please refer to the actual product for details.

Продукт сүрөттөмөсү

Орнотуу ыкмасы

Please wire the device according to the marking on the cover.ON/OFF operating principle:

• Туташкан приборлор зым менен иштейт/токтот.
• The device must be powered by L and N.

Warning: S1 and S2 can only be connected to the two ends of the wall switch. S1 and S2 cannot be connected to a strong power such as a zero-fire line! When wiring, please turn off the AC power supply!

Тармак конфигурациясы

• Long-press the device’s “Button” for 3 seconds, and the indicator led flashes rapidly, indicating that the device has entered the network discovery mode.
• Select Gateway on APP -> Search Device (refer to Zigbee Gateway /APP manual)

 Кеңештер: 

• Zigbee device must connect to the Zigbee gateway to upload data to the SERVER/APP.
• This product supports the Zigbee route (signal repeater) function.

Көп берилүүчү суроолор