CX2 CONTROLLER
model: Chroma 
Көп берилүүчү суроолор
FERTIGATION, PRUNING, DIMMING, AND MORE!
Please report any damaged or missing items from your order within 10 days of receiving it to sales@favenlighting.com.
THANK YOU FOR CHOOSING FAVEN
In this manual, you will find information on installation, product specifications, warranty, and more!
ТЕХНИКАЛЫК КОЛДОО КЕРЕКПИ?
We have a team of FRIENDLY ADVICE WIZARDS ready to help you out!
Электрондук почта: support@favenlighting.com
Телефон: 916.234.6569
ЖАЛПЫ СУРООЛОРУ
Электрондук почта: sales@favenlighting.com
Телефон: 916.235.3295
БИЗ МЕНЕН БАЙЛАНЫШ
@favenlighting
favenlighting.com
Коопсуздук маалыматы
Warning! Please read the following information carefully before installing and using it.
- Please read and understand this manual completely before installing and using the product.
- Keep the CX2 controller away from fire, excessive heat, water, ducts, and contamination.
- Do not open or disassemble the CX2 controller. Opening the controller will void its warranty immediately.
- Кирүү көлөмүtage should be kept above 11.5V and below 12.5V DC; the input current should not be lower than 700mA; otherwise, the product may not work properly.
- CX2 controller should only be used to control compatible Faven lights. Do not connect the CX2 controller to other products, as this can be dangerous and may cause the connected equipment to malfunction. Doing so will void the warranty.
- Do not place the LCD in a hot or humid environment, and expose the LCD screen to direct sunlight or strong fluorescent light for long periods.
- Do not leave the CX2 controller unsecured fromthe wall mount brackets.
Продукт мазмуну
Техникалык шарттар
| Адаптер киргизүү | 100-240VAC, 50/60142 02A |
| Controller Input | 12V, 1A |
| Lighting Control Channels | 2 |
| Lighting Control Level | MAIN: OFF/40-100% FAR RED: OFF/25-100% |
| Түзмөктөрдүн саны) Каналга | 100(RS-485) |
| Woddng Environment | Ternperature 0-50V32-1227), Humiditys80% |
| Салмагы | 048 фунт |
| Өлчөмдөр | L:543In*VV:333 in*H:to4 In |
| Орнотуу | Wall mount with screws, magnet |
| Кепилдик | 3 жыл |
Өлчөмдүн чиймеси
Орнотуу
Mount with 3M Adhesive
Remove the tape cover from the iron plate and paste the plate on the mounting surface where you want the controller located.
Then you can place the CX2 Controller on the iron plate via a built-in magnet on its back.
Mount with Expansion Screws
This installation method requires drilling holes where you plan to mount the CX2 Controller. First, measure the distance between the holes on the iron plate and mark the distance on the mounting surface. Next, use a drill to create the necessary holes and push the plastic expansion pipes in. Then, line the iron plate’s holes with those holes, and screw it into place using the expansion screws. Now the Controller can be placed directly onto the iron plate thanks to its built-in magnet!
You can also hang your CX2 Controller directly on the screws without using the iron plate. First, measure a center distance of 74mm and drill an expansion screw on each point. Next, hang the CX2 Controller directly on the screws by sliding the slotted hanging holes over the screws and then allowing the CX2 Controller to hang down.
Байланыш
A RJ11 Network interface: Light control (Channel 1)
B INACTIVE
C RJ11 Network interface: Light control (Channel 2)
D INACTIVE
E Power Input: 12V 1A DC
F Калыбына келтирүү
Система туташуу
Control Interface
 |
Канал баскычы Press to switch Channel 1/ Channel 2. |
 |
Жарык баскычы Press to switch Light type: Main/FR. |
 |
Орнотуу баскычы Press to set Manual/ Schedule mode. |
 |
Ырастоо баскычы Press to confirm settings. Long-press to lock or unlock the screen. |
 |
Өйдө баскычы Press to increase the value of the current setting. Long-press to enter system settings. |
 |
Төмөн баскычы Press to decrease the value of the current setting. |
Control Interface
- Канал дисплей
Channel 1 or Channel 2 setting and status. - Main Light White Bars
Light intensity level and percentages. - Main Light Spectrum
Displays the current Light spectrum - Негизги жарык режими
Manual/Schedule mode of the current Channel. - FR Light Mode
Manual/Schedule mode of the current Channel. - Күн чыгышы/Батышы
Turn on/off Sunrise/Sunset in cycle mode. - Системаны орнотуу
System settings of button voice, 12H/24H, time, and Screen Brightness. - Канал режими
Set Independent/Follow mode for Channel 2. - Үн баскычы
Turn on/off the button voice. - Системанын кулпусу
Indicates the system is locked and cannot operate. - Ойготкуч сүрөтчөсү
Indicates a system abnormality. - Убакыт режими
Set 12H or 24H time mode and display the current time.
Системалык орнотуулар
8.1 Экранды кулпулоо/кулпусун ачуу
кармаңыз button for 3 to 5 seconds to lock or unlock the controller.
8.2 Система орнотуулары
To Access the System Settings Menu:
кармаңыз баскычын 3ден 5 секундага чейин басыңыз.
The following settings will be available in sequence:
Аудио жөндөө
Колдонуу
to toggle sound 
on or off. Press ырастоо үчүн.
Убакыт форматы
Choose between 12-hr or 24-hr format. Use жана басыңыз ырастоо үчүн.
Тутум убакытын коюңуз
Колдонуу to adjust the time. Pressto confirm each value.
Экран жарыктыгы
Колдонуу Channel 2 Modes and press ырастоо үчүн.
Choose brightness level (L1, L2, or L3).
Channel 2 Modes 
Follow Mode: Channel 2 mirrors all Channel 1 settings (intensity, spectrum, far-red, schedule).
Independent Mode: Channel 2 operates with its own settings.
Колдонуу тандоо жана басыңыз ырастоо үчүн.
After completing the last setting, the controller will return to the main screen.
Main Light Control: Intensity, Spectrum, and Scheduling
To access main light settings (intensity, spectrum, and schedule):
- басыңыз баскычын бир жолу.
- басыңыз баскычы.
9.1 Menu Flow
Режим тандоо
Channel 1 (CH Main 25% Choose Manual or Schedule mode. Use жана басыңыз ырастоо үчүн.
Set Intensity (40%-100%)
Колдонуу to adjust. Press ырастоо үчүн.
Set Spectrum (R4-R9)
Колдонуу to adjust. Press ырастоо үчүн
If Schedule Mode is selected:
Set ON Time > Press
Set OFF Time > Press
Mode Selection: Select between Sunrise or Sunset ramping > Press
If Manual Mode is selected, time-related steps are skipped.
Once all selections are confirmed, the system will return to the main screen.
Far-Red Channel Control and Dual Scheduling
To access far-red channel settings:
- басыңыз баскычы.
- басыңыз кайра баскычын.
- басыңыз баскычы.
10.1 Menu Flow
Режим тандоо
Choose Manual or Schedule mode. Use жана басыңыз ырастоо үчүн.
Set Far-Red Intensity (25%-100%)
Колдонуу to adjust. Press ырастоо үчүн.
If Schedule Mode is selected:
Set Schedule 1 ON Time > Press
Set Schedule 1 OFF Time > Press
Schedule 2 Enable/Disable
Use Up/Down to turn Schedule 2 ON or OFF >
Pressto confirm (Default state is OFF)
If Schedule 2 is ON:
Set Schedule 2 ON Time > Press
Set Schedule 2 OFF Time > Press
Schedule 2 allows a second independent timing window, often used for end-of-day or early-morning far-red events.
After final confirmation, the system returns to the main screen.
Example Setup Process
**Disclaimer: Бул эксample setup provided for demonstration purposes only. Each facility may have its own unique requirements, and your setup may differ based on specific needs.**
11.1 Main Lighting Setup
- Басыңыз> Басыңыз
- Select Schedule > Press
- Set Intensity to 100% > Press
- Set Spectrum to R6 > Press
- Set ON time to 00:00 > Press
- Set OFF time to 12:00 > Press
- Select Sunrise or Sunset OFF ramp > Басыңыз
1.2 Far Red Setup For Beginning and End of Day Lighting:
- Басыңыз > Басыңыз again > Press
- Select Schedule > Press
- Set Intensity to 100% > Press
- Set Schedule 1:
ON: 00:00 > Press
OFF: 12:00 > Press - Enable Schedule 2 > Press
- Set Schedule 2:
ON: 00:00 > Press
OFF: 12:00 > Press
Кепилдик
The company warrants the mechanical and electronic components of this product and guarantees the materials and workmanship free of defects if used under normal operating conditions, for a period of three (3) years from the original date of the purchase.
If you find that there are any defects with this product that relate to either the workmanship or the materials but are not due to improper use or user error, the company shall, at its discretion, either replace or repair the product using the appropriate new or reconditioned parts. In the case that the company decides to replace the entire product, the date of the limited warranty shall apply to the replacement from the date of the purchase of the initial product for three (3) years. For technical support or warranty claims:
Webсайт: www.favenlighting.com/support
Электрондук почта: support@favenlighting.com
GROWING WITH CHROMA
Scan for resources, best practices, product updates, and more!
CX2 BY FAVEN DESIGNED FOR: CHROMA
CX2 CONTROLLER
Документтер / Ресурстар
 |
FAVEN Chroma CX2 Controller [pdf] Колдонуучунун колдонмосу Chroma CX2 Controller, Chroma, CX2 Controller, Controller |