Intel 815E Integrated Graphics Controller Instruction Manual

The Intel® 815E Chipset extends Intel’s graphics capabilities into the value PC segment by incorporating 2D and 3D capabilities with the memory controller, to provide the industry with complete graphics offerings for every computing segment.

Intel® 815E Chipset

Support 4MB Display Cache (optional)
Support AGP 2X/4X BUS
2D & 3D Graphics Accelerator

Системалык талаптар

This section describes the system requirements for the VGA Driver installation and Usage.

Computer Intel® CeleronTM/ Pentium® III (FC-PGA) processor or higher
Monitor VGA Support, minimum 640×480 resolution
Operating system DOS 5.0 or higher, Windows® 95/98, Windows® NT 3.51 or 4.0, or OS/2®
CD-ROM Double Speed or Higher Chipset Intel® 815E chipset
VGA BIOS Version 00.23 or Higher

Intel® 815E VGA Driver Setup & Usage Procedures

Insert the CD title into your CD-ROM drive. This CD will auto-run. This will display installation for the VGA driver and sound driver, Intel 815E/820 INF Update (only for Windows® 95/98), and Trend PC-cillin 98. Just click the button for automatic installation of the VGA driver.

Windows® 95/98

If you start Windows® 95/98, this will automatically detect the hardware onboard “Standard PCI Graphics Adapter (VGA)”. You need to click “Next”, then “Finish”. Do not click on the “Cancel”. The driver needs these IDs.

Эскертүү: Before installing the Intel 815 VGA Driver, you need to install the Intel 815E/820 INF update first.

Display Driver Installation Procedure:

Step 1: Insert the provided CD_ROM disk into the CD-ROM drive. Step 2: Look for the CD-ROM drive, and double-click the CD-ROM icon. This will show the setup screen.
Step 3: Click on the “Intel 815 VGA Driver” icon.
Step 4: This will show an installation menu.
Step 5: Click on “Display Drivers”.
6 -кадам: "OK" чыкылдатыңыз.
Step 7: This will copy the VGA drivers to the hard drive.
Step 8: A message will appear stating you must restart the Win- dows® 95/98 system. Select yes to restart.
Step 9: After restarting, Windows® 95/98 will show a new display setting.

Windows® NT 4.0

You need to install Windows® NT “Service Pack 3” or higher before you install the Windows® NT driver.

Display Driver Installation Procedure:

Step 1: Click the Start menu and select Control Panel from the Settings group.
Step 2: Select the Display icon.
Step 3: Select Settings on the Display Properties.
Step 4: Select Display Type.
Step 5: Select Change from the Adapter Type Area.
Step 6: Select Have Disk of Change Display.
Step 7: Insert the CD-Title Disk into the CD-ROM Drive.
Step 8: When the Install from Disk dialog box appears, look for your CD-ROM drive \SVGA\Intel\815E\NT4\WINNT4
Step 9: When the Change Display dialog box appears, click OK. Step 10: When the Third-party Drivers dialog box appears, click Yes. A message will appear stating that the drivers were successfully installed. Click OK. You must now restart Windows® NT 4.0.

Эскертүү: You can also use CD autorun to install the VGA NT driver.

Changing resolution, color depth, and refresh rate:

Step 1: Click the Start menu and select Control Panel from the Settings group.
Step 2: Select the Display icon.
Step 3: Select Settings.
Step 4: Select Color Palette to change between 256 colors, 65536 colors, and 16777216 colors.
Step 5: To select desktop resolution size, go to the Desktop area and use the slide bar to change resolution from 640×480, 800×600, 1024×768, 1152×864, 1280×1024, to 1600×1200.
Step 6: Select Test to test the resolution. If the display test screen was good, then select Yes when the Testing Mode dialog box appears. If the display test screen was bad, then select No. Windows® NT will give you an error message.
Step 7: Click OK. If the display test screen was good and you select Yes, Windows® NT 4.0 will change the mode without restarting the system.

AutoCAD, OS/2, and other applications

Please refer to the Onlineinee Manual in the CD-ROM. You need to install the “Acrobat Reader 3.01” program first.

Көп берилүүчү суроолор

Can I install the VGA NT driver using CD autorun?

Yes, you can also use CD autorun to install the VGA NT driver.

Документтер / Ресурстар

Intel 815E Integrated Graphics Controller [pdf] Instruction Manual
MS-6315, 6178-4, 815E Integrated Graphics Controller, 815E, Integrated Graphics Controller, Graphics Controller, Controller

Шилтемелер

User Manual

Intel 815E Integrated Graphics Controller

Техникалык шарттар

Продукт колдонуу нускамалары

Бүттүview