INTERRA iX7 Touch Panel Instruction Manual

INTERRA iX7 Touch Panel

Техникалык шарттар

• Продукт коду: ITR165-X0X4
• Электр камсыздоо: 12-30 VDC or PoE+
• Номиналдуу ток керектөө: 350 mA @12 VDC
• Максималдуу учурдагы керектөө: 640 mA @12 VDC
• Communication Current (from KNX Bus): 5 мА
• Номиналдуу электр керектөө: 4.2 Вт @12 VDC
• Max. Кубатты керектөө: 7.7 Вт @12 VDC
• CPU: Төрт ядролуу ARM Cortex-A53
• Эстутум: 2 ГБ DDR3
• Сактагыч: 8 ГБ EMMC
• OS: Interra Operation System based on AOSP 7.1
• Коргоо түрү: IP 20
• USB: 2 х USB2.0
• KNX: 1 x KNX Connector
• Перифериялык түзүлүштөр: Temp/Hum Sensor, MEMS Microphone
• Баскыч: Калыбына келтирүү баскычы
• Тармак: 100Mbps Ethernet
• RTC: Real Time Clock up to 5 days
• GPIO: 6 Digital Dry Contact Inputs (the Sixth input supports Digital/Analog Mode), 6 Relay Outputs
• Температура диапазону:
  • Иштөө: 0°Cден 45°Cге чейин
  • Сактоо: -15 ° Cден 70 ° Cге чейин
• Өлчөмдөрү:
  • Panel: 125 x 210 x 54.15 mm (W x H x D)
  • Mounting Box: 116 x 201 x 65 mm (W x H x D)
• Конфигурация: With Interra Configurator Software

СҮРӨТТӨМ

Interra iX7 touch panel is designed to control the entire automation system from a single smart point. Interra İX7 can control complex systems such as switches, simple sensors, lighting, camera systems, and alarm systems from a central point. Moreover, iX7 can also control the air conditioning systems with 2 2-point mode by thermostat functionality. Mobile control can be done by downloading InterraX software from online software markets related to IOS or Android-based devices. Also, the configuration software (Interra Configurator) can be downloaded from our webсайт (www.interratechnology.com) for the iX7 touch panel configuration.

MODELS AND VARIATIONS

MAIN FUNCTIONAL CHARACTERISTICS

• Automation Control: Control EIO (IO Module controlled over ethernet) and KNX automation systems with the Interra Touch Panel.
• Таймер өзгөчөлүгү: Schedule operations daily, weekly, monthly, or annually using the panel s timer.
• Коопсуздукту көзөмөлдөө: Manage security systems and view cameras via the panel and mobile apps.

БАЙЛАНЫШТАР

Тtage: The panel is powered with 12 12-30 VDC via 2 2-pos red coloured connectors. The connector label shows the correct polarity for cable connections.
KNX: The panel has a blue 2 2-pos connector for the KNX port. The connector label shows the correct polarity for cable connections.
USB: The iX7 features two USB host connectors on the side panel for storage expansion.
Ethernet: The panel includes a standard 10/100Mbps RJ45 Ethernet connector.
I/O: The panel has 6 digital dry contact inputs and 6 relay outputs, Input 6 (the sixth input) input)” can operate in digital or analog mode. A temperature sensor can be connected to input 6. Output relay contacts capable of driving 250VAC 5A resistive loads.

Эскертүү: Input 6 operates in analog or digital mode on products that support analog functionality.

ӨЛЧӨМДӨР

Дүйшtage Box:

Түзмөк

ЖАЛПЫ ӨЗГӨЧӨЛҮКТӨР

МОНТАЖ

1. First, the mounting box must be attached to a suitable place on the wall. The long side of the mounting box should be placed at a right angle to the ground.
2. Then, iX7 is attached to the mounting box as shown in the left figure, and the mounting process is completed.

КООПСУЗДУК НУСКАМАЛАРЫ

• Аппаратты квалификациялуу электрик же ыйгарым укуктуу персонал гана орнотуп, ишке киргизиши мүмкүн.
• For planning and construction of electrical installations, the appropriate specifications, guidelines, and regulations in force in the respective country must be followed.
• Негизги томду туташтырбаңызtage (230 VAC) or any other external voltages to any point of the KNX bus.
• Тышкы томду туташтырууtage might put the KNX system at risk. Please do not overlook this issue.
• Ensure there is sufficient insulation between the 230 VAC voltage cables and the KNX bus.
• The maximum screwing torque value should be 1.2 Nm during the mounting process of the mount case and touch panel.
• Do not use aerosol sprays, solvents, or abrasives that might damage the device.
• Иштөө жана визуалдык текшерүү үчүн аппараттын жеткиликтүүлүгү камсыз кылынууга тийиш.