JoJo Booster Pump Flow Controller
Техникалык шарттар
- Продукт аты: JoJo Booster Pump Flow Controller
- шайкеш келет: JoJo Booster Pumps
- Алмаштыруучу бөлүк: JoJo PC Board
- Керектүү куралдар: STAR SCREW DRIVER
Сиз төмөнкүлөрдү талап кылат:
Эскертүү: Our Booster Pump PC Board is only suited for use with the following JoJo
Booster Pumps:
- 0.37 кВт күчөткүч насос
- 0.55kW, 0.75kW & 1.1kW
- Центрифугалуу насостор
- 0.6 кВт өзүн-өзү толтуруучу реактивдүү насос
Продукт колдонуу нускамалары
1-КАДАМ
Ensure that your pump is disconnected from the power source.
2-КАДАМ
Unscrew the four screws holding the terminal box cover in place.
3-КАДАМ
Терминал кутусунун капкагын алыңыз.
4-КАДАМ
Disconnect the wires from the terminals and remove from the terminal box.
5-КАДАМ
Unscrew the two screws holding the PC Board in place.
6-КАДАМ
PC тактасын алып салыңыз.
7-КАДАМ
Insert the replacement JoJo PC Board.
8-КАДАМ
Insert and fasten the two securing screws on both sides of the PC Board.
9-КАДАМ
Secure the wires to the terminals as follows:
- the wires from the pump through the bottom grommet
- the wires from the three-point plug through the top grommet.
Эскертүү: ensure that the correct color sequence is followed as shown below
10-КАДАМ
Replace the terminal box cover, and fasten the four screws holding it in place.
11-КАДАМ
Your pump is now ready for use and reconnection to your power supply.
Scan the QR Code to watch the instructional video for visual guidance.
Көп берилүүчү суроолор
Can I use the JoJo Replacement PC Board with other pumps?
Our Booster Pump PC Board is only suited for use with JoJo Booster Pumps.
Документтер / Ресурстар
 |
JoJo Booster Pump Flow Controller [pdf] Колдонуучунун колдонмосу Booster Pump Flow Controller, Pump Flow Controller, Flow Controller, Controller |