Ledbe SP103E LED Magic Controller Owner’s Manual

Ledbe SP103E LED Magic Controller Owner’s Manual

Ledbe-logo

Ledbe SP103E LED Magic Controller

Ledbe-SP103E-LED-Magic-Controller-product

Бүттүview

The SP103E is a compact, high-stability controller for addressable RGB pixels, designed for dynamic lighting with an intuitive 14-key RF remote and a wide 5–24V input range.

Техникалык шарттар

Киргизүү көлөмүtage DC 5–24 В
Pixel Capability 2048 XNUMX XNUMX пикселге чейин
Supported ICs WS2811, WS2812B
RF Remote Range ~20 meters (~65 feet)
Иштөө температурасы -20°Cден 60°Cге чейин
Controller Dimensions 70 × 12 × 3 мм
Remote Dimensions 85 × 40 × 6 мм
Built-in Dynamic Effects 358
Алыскы ачкычтар 14-key RF remote
LED Signal Type TTL/SPI signal addressable RGB pixels
Шайкештик эскертүүсү Not designed for constant voltage PWM LEDs

Quick Setup & Use

  1. Provide DC 5–24V input power to the controller.
  2. Connect supported addressable RGB pixels that use TTL/SPI signaling (WS2811 or WS2812B).
  3. Use the included 14-key RF remote to select lighting modes and effects.
  4. Operate within the remote’s range of approximately 20 meters.
  5. Ensure installation conditions are within -20°C to 60°C and that the total pixel count does not exceed 2048 pixels.
An elegant, high-performance controller designed for addressable RGB pixels. Compact in size and highly stable, it features an intuitive 14-key RF remote control and a wide voltage киргизүү диапазону.

Негизги өзгөчөлүктөрү & Description

  • Addressable LED Compatibility: Supports TTL/SPI signal addressable RGB pixels (WS2811, WS2812B).
  • Шайкеш келбеген түзмөктөр: NOT designed for constant voltage PWM LEDs.
  • RF алыстан башкаруу: Includes a 14-key RF wireless remote with approximately 20 meters of range.
  • Динамикалык эффекттер: Loaded with 358 built-in dynamic lighting effects.
  • Control Capacity: Capable of driving up to 2048 pixels.
  • Compact Hardware: Small, high-stability design optimized for space-restricted installations.

камтыйт

  • 1 * SP103E Mini Programmable LED Controller
  • 1 * 14Keys RF Remote
  • 1 * Колдонуучунун колдонмосу

Проблемаларды чечүү

  • No/incorrect lighting effects: Confirm you are using addressable RGB pixels that match the supported ICs (WS2811, WS2812B) and use TTL/SPI signaling.
  • Controller not responding to the remote: Check that you are within the RF remote range (approximately 20 meters).
  • Effects are unstable or not working as expected: Киргизилген томду текшериңизtage is DC 5–24V and that the operating temperature is within -20°C to 60°C.
  • Pixels not lighting fully: Ensure the total number of pixels does not exceed the controller’s capacity (up to 2048 pixels).
  • Using wrong LED type: The controller is not designed for constant voltage PWM LEDs; switch to compatible addressable pixels.

Документтер / Ресурстар

PDF thumbnailSP103E LED Magic Controller
Owner's Manual · SP103E LED Magic Controller, SP103E, LED Magic Controller, Magic Controller, Controller

Шилтемелер

Суроо бериңиз

Use this section to ask about setup, compatibility, troubleshooting, or anything missing from this manual.

Суроо бериңиз

Ask about setup, compatibility, troubleshooting, or anything missing from this manual. Name and email are optional.