MSI CD270 Multi Node Compute Server

Техникалык шарттар

• Модели: G52-S3862X1
• CPU: CD270-S3071-X2
• Drive Bays: 12 x Hot-Swap 2.5 U.2 Drive Bays (PCIe 5.0 x4, NVMe)
• Memory: Supports DDR5 DIMM slots compatible with RDIMMs, 3DS-RDIMM, and MRDIMMs

CD270-S3071-X2
Server System Quick Start Guide

Сүрөттөө

1	COM USB Type-A Port	5	Тутумдун абалы LED
2	USB 2.0 Type-A порту	6	UID LED Button (default)/ System Reset Button*
3	1000Base-T Ethernet Port (for mgmt.)	7	System Power LED Button
4	Mini-DisplayPort	8	OCP 3.0 Mezzanine Card Slot

* The UID LED button can also function as system reset button, configured using jumper J1_1.

System Node Tray Removal

Маанилүү

• Power Off Node First: Removing a powered-on node will cause immediate power loss.
• Independent Power: Each node operates with its own power supply. Turning off one node does not affect others.

Жоюу кадамдары

1. Pull the thumb latch aside to release the node.
2. Grasp the handle to gently slide the node out of its slot.

Support the weight of the node while removing it to prevent accidental drops.

CPU

Single Intel® Xeon® 6900P series processors, TDP up to 500W per node.

CPU жана радиаторду орнотуу

Эс
Each node supports 12 DDR5 DIMM slots, compatible with RDIMMs, 3DS-RDIMM and MRDIMMs

DIMM түрү	Max Frequency	Max Capacity per DIMM
RDIMM/ 3DS-RDIMM	6400 MT/s (1DPC)	256 ГБ
MRDIMM	8800 MT/s (1DPC)

DDR5 Only DIMM Configuration Diagram ( for Intel® Xeon® 6900P Series)

⚠ Маанилүү

• Ар бир розеткада жок дегенде бир DDR5 DIMM болушу керек.
• DDR5 эс конфигурациялары бирдей DIMM түрлөрүн, даражаларын, ылдамдыгын жана тыгыздыгын талап кылат.
• Сатуучуларды, 3DS/3DS эмес RDIMMлерди, 9×4 RDIMMдерди же x8/x4 DIMMлерди аралаштырууга жол берилбейт.
• Ар кандай иштөө жыштыгы менен DIMMлерди аралаштыруу ырасталган эмес. Жыштыктар айырмаланганда, система демейки эң төмөнкү жалпы ылдамдыкка келет.

Тутум тактасы

On Board Connectors, Jumpers and LEDs

аты	Description
Тутум тактасы
JPICPWR_1~4	12V PICPWR power connectors (12-pin)
JPICPWR_5	12V PICPWR power connectors (6-pin)
JPWR1~2	4-pin power connectors
JMCIO1~9	MCIO 8i connectors (PCIe 5.0 x8)
M2_1~2	M.2 уячалары (M Key, PCIe 5.0 x2, 2280/ 22110)
OCP0	OCP 3.0 mezzanine slot (PCIe 5.0 x16, NCSI supported)
DC-SCM	DC-SCM 2.0 edge slot
JCOOL2	4-Pin liquid leak detection header
JCOOL3	6-Pin liquid cooling header
JUSB3	USB 3.2 Gen 1 connector (5 Gbps, for 2 USB ports)
JFP1~2	DC-MHS control panel header
JPDB_MGNT	PDB management header
JIPMB1	IPMB header (debug only)
JVROC1	VROC connector (debug only)
FBP_I2C_1~3	I2C баштары
JCHASSIS1	Шассиге интрузиянын аталышы
JPASSWORD_C_1	Password clear jumper (default pin 1-2, Normal)
JUART_SEL1	UART BMC/ CPLD select jumper (default pin 1-2, UART BMC to CPU)
JTAG_SEL2	JTAG select jumper (default pin 2-3, BMC to CPU)
JBAT1	MBP/ I3C select jumper (default pin 1-2, MBP)
JBAT2	RTC clear jumper (default pin 1-2, Normal)
JBAT7	PESTI flash select jumper (default pin 2-3, PESTI2 flash)
LED_H1, LED_L1	Порт 80 мүчүлүштүктөрдү аныктоо LED
MGT1 DC-SCM Module
TPM	SPI TPM Header (for TPM20-IRS)
M2_1	M.2 Slot (M Key, for ROT1)
J_JTAG	Manual programming header (debug only)
J3D2	Force BMC update jumper (default pin 1, Normal)
J3C1	FRU jumper (default pin 2-3, FRU normal operated)
J3C5	JTAG SW jumper (default pin 2-3, JTAG SW enable)
J1_1	ID/ Reset button select jumper (default pin 1-2, ID Button)
LED1	BMC жүрөктүн согушу LED

Көп берилүүчү суроолор

• Q: Can I mix different types of DIMMs in this system?
  A: No, mixing vendors, non-3DS/3DS RDIMMs, 9×4 RDIMMs, or x8/x4 DIMMs is not allowed. It is recommended to use identical DIMMs for optimal performance.
• Q: What is the maximum memory capacity supported per DDR5 DIMM?
  A: The maximum capacity supported per DDR5 DIMM is 256 GB.

Документтер / Ресурстар

MSI CD270 Multi Node Compute Server [pdf] Колдонуучунун колдонмосу X2, S386-S3071-v1.0-QG, G52-S3862X1, CD270 Multi Node Compute Server, CD270, Multi Node Compute Server, Compute Server, Server

Шилтемелер

• User Manual