Plugin Alliance EQ825 Mastering Equalizer User Manual

Gain Control of Behavior
The gain knobs’ behavior has been adjusted for intuitive control. Gain in dB is directly proportional to knob rotation, unlike the original hardware unit.

Global Controls

GAIN INPUT: Adjusts the input level entering the plugin.
ЧЫГЫШ: Плагиндин чыгуу деңгээлин көзөмөлдөйт.
THD: Regulate the analog harmonic distortion level.

ФУНКЦИЯЛАРЫ

Куралдар панели

А / Б
Gives access to two different settings for quick comparison. The selected memory appears in blue. All the parameter changes or preset loads affect only the selected memory.

Көчүрүү баскычы (>)
Басканда, учурдагы эс башка эстутумга көчүрүлөт.
График
Shows the EQ curve editor. When the ink is disabled, click L or R to select which channel is edited.

Бардык инстанцияларда коюу » параметрдин маанисин сеанстагы плагиндин бардык инстанцияларына көчүрөт. Буга [shift] + меню опциясын чыкылдатуу менен да жетүүгө болот.
Демейки катары сактоо » плагин ачылганда учурдагы параметр маанисин демейки маани катары орнотот. Буга [alt] + меню параметрин чыкылдатуу менен да жетсе болот.

Жөнүндө
Плагин версиясын жана кредиттер тууралуу маалыматты көрсөтөт.

Калибрлөө
You can choose the calibration level here (the mapping between the real digital dBFS level and the virtual dBu level in the simulated circuits).
Калибрлөө деңгээли көбүнчө XX dBFS = 0 VU (же +4 дБу) катары көрсөтүлөт.

Oversampлинг
Сиз ашыкчаларды тандай аласызampбул жерде линг режими. Жогорку ашууларampling reduces the aliasing problem, but makes the processing n-times moreCPU-intensivee.

UI Zoom
The Lindell EQ825 UI size can be reduced using these menu options from 80% to 150% of its normal size.
Note that the plugin’s size will never get larger than 80% of the screen width/height, regardless of the UI Zoom setting.

Ызы-чуу
Плагин адатта угулбай турган ызы-чуунун өтө аз көлөмүн кошот (ызы-чуу полу). Аны бул жерден өчүрсө болот.

EQ BAND

LOW (Yellow)
FREQ: Selects the corner frequency for the low shelf (20Hz, 30Hz, 60Hz, 100Hz).
GAIN: Boosts or cuts the low-frequency range (+-12dB).
LOW MID (Red)
FREQ: Selects center frequency (60Hz to 1kHz).
GAIN: Boosts or cuts the selected frequency (+-12dB).

MID (Orange)
FREQ: Center frequency from 1.5kHz to 5kHz.
GAIN: Boost/cut control (+-12dB).
HIGH MID (Green)
FREQ: Selects from 6kHz to 16kHz.
GAIN: Boosts or cuts the selected high-mid frequency (+-12dB).

HIGH (Blue)
FREQ: Selects the corner frequency of the high shelf (3kHz, 5KHz, 10kHz, 20kHz)
GAIN: Boosts or cuts the low-frequency range (+-12dB).
Note on the Gain Controls Behavior
The gain knobs response has been intentionally adjusted compared to the original hardware to improve usability. In this plugin,
gain in dB is directly proportional to knob rotation, allowing for more intuitive control. So when comparing with the hardware unit, do not rely solely on matching knob positions.

Пропорционалдуу Q
The original hardware employs a proportional-Q design, where the bandwidth narrows as the gain increases. This behavior contributes to its musical yet precise character, particularly in mastering contexts. The plugin faithfully replicates this behavior for each band.
LINK
Links the Left (Mid) and Right (Side) controls. When a parameter is changed on one channel, the corresponding parameter on the other channel is also modiﬁed.

АЙЫМ
Activates Mid/Side stereo processing instead of Left/Right.

ГЛОБАЛДЫК КОНТРОЛДОР

АЛУУ
INPUT: controls the level entering the plugin.
OUTPUT: controls the level at the plugin output.
THD
Толук гармоникалык бурмалоо. Аны аналогдук гармоникалык бурмалоонун көлөмүн тууралоо үчүн колдонуңуз, 0дБ кадимки эмуляцияланган аппараттык бурмалоо деңгээли.

Жогорку өткөөл
Adds a high-pass ﬁlter after the main EQ ﬁlters. Frequency: 15Hz to 300Hz, Slope: 6dB/oct. To 36dB/oct.
ТӨМӨН ПАС
Adds a lowpass ﬁlter after the main EQ ﬁlters. Frequency: 3kHz to 40kHz, Slope: 6dB/oct. To 36dB/oct.

Special Processing

MONO 200Hz
Collapses all content below 200Hz to mono.

OCTAVE FILLER
Enhances the perceived weight and fullness of the low end using psychoacoustic principles. The trim can be used to select the center frequency of the effect.

ИНТЕНСИЯ: controls how much the bass content is pushed.

Кредиттер

Emmanuel Dubecq – LSR audio Design

Программалоо
Графика
Схеманы моделдөө

Tobias Lindell – Lindell Audio Design

Сыноолор жана тюнинг
Алдын ала орнотуулар

Көп берилүүчү суроолор

Q: How can I link the Left and Right controls?
A: Use the ‘LINK’ option to link the Left (Mid) and Right (Side) controls. Changes made to one channel will reflect on the corresponding parameter of the other channel.

Q: What does M/S activation do?
A: Activating M/S switches to Mid/Side stereo processing mode instead of Left/Right, providing a different stereo processing approach.
Q: What is the purpose of proportional Q design?
A: The proportional-Q design narrows bandwidth as gain increases, contributing to a musical yet precise character, especially in mastering scenarios. This behavior is faithfully replicated in the plugin for each band.

Документтер / Ресурстар

Plugin Alliance EQ825 Mastering Equalizer [pdf] Колдонуучунун колдонмосу
EQ825 Mastering Equalizer, EQ825, Mastering Equalizer, Equalizer

Шилтемелер

User Manual

Plugin Alliance EQ825 Mastering Equalizer

Техникалык шарттар

Продукт колдонуу нускамалары