Power Home MPPT Bluetooth WiFi Solar Controller

Продукт маалыматы

Өзгөчөлүктөрү:

• Контроллердин түрү: Bluetooth, WiFi, Solar Controller
• Киргизүү көлөмүtage: 12V/24V auto adaptive (manually set for other versions)
• Батареянын түрлөрү колдоого алынат: Lead-acid, solid, lithium, lithium iron phosphate
• Кубаттоо булагы: Photovoltaic panels only
• Өзгөчөлүктөрү: Industrial-grade main control chip, MPPT tracking charging, large LCD, 3-stage charging management, built-in protection features

Продукт колдонуу нускамалары

1. Алгачкы орнотуу: Ensure the battery has sufficient voltage. Install the controller close to the battery to avoid a voltagд тамчы. Контроллердин параметрлерин автоматтык түрдө орнотуңуз.
2. Батарея шайкештиги: Understand battery characteristics before charging lithium batteries. Set appropriate charging parameters accordingly.
3. Кубаттоо булагы: Only use photovoltaic panels as the charging source. Avoid using DC or other power sources.
4. Жайгашкан жери: Install the controller on a flat, well-ventilated surface to manage heat dissipation.
5. Коопсуздук чаралары: Use a battery protection board when charging lithium batteries. Do not charge directly without a protection board.

Коопсуз колдонуу боюнча сунуштар

1. This controller is 12V/24V auto adaptive, or another version 12/24/36/48/60V manually set suitable battery charging mode. When installing the controller for the first time, please make sure the battery has enough voltage контроллердин параметрлерин автоматтык түрдө баштоо жана орнотуу үчүн.
2. Voltagе тамчы узун зымдардан келип чыккан, нормалдуу т.аtagе өкүм.
3. This controller is suitable for charging lead-acid, solid, lithium, lithium iron phosphate, and other batteries. When charging lithium batteries, one to be very familiar with the characteristics of its batteries; the power must be set up after charging parameters to used. For example: charging 12V lithium batteries, prohibiting the output protection set to 9.5V, full protection 12.2V, and battery drop starts charging voltage 11.5Вда.
4. This controller can only use photovoltaic panels as a charging source. Please do not use DC or other power sources as a charging source.
5. This controller will be hot when running. Please pay attention to installing the controller on a flat, well-ventilated surface.
6. When charging lithium batteries must be with a battery protection board. Be sure to use certified lithium battery manufacturers to meet the requirements of the product. It is strictly prohibited to charge directly without a protection board, and it is strictly prohibited to privately transform the lithium battery pack charging.

Продукт өзгөчөлүктөрү

1. Industrial-grade main control chip, 16-level AD sampling accuracy, temperature, charging current, discharging current, accurate real-time display, and power generation at a glance.
2. Automatic focusing MPPT tracking charging, high charging efficiency, charging process without stopping detection, and two-way focusing tracking.
3. Large LCD, adjustable charging and discharging parameters. Ultra-wide charging and discharging are adjustable, as long as you understand the characteristics of the battery and set its corresponding charging parameters, you can charge any battery. Output power off points, time can be adjusted, more convenient (the market only sometimes there is no sub-adjustment).
4. 3-секtage charging management, effective protection of the battery, and the battery becomes more durable.
5. Built-in overheating, overcurrent, short-circuit, open-circuit protection, and reverse connection protection. When the fault is eliminated, the controller automatically restores the equipment without damage.
6. Bi-directional MOS tube anti-backflow circuit, high power charging mode, ultra-low heat generation.
7. R5.0 solar charging DC plug, R5.0 DC lamp чыгаруу DC сайгыч, туташуу үчүн жеңил.

Icon Definition/Key

• Меню баскычы: used to switch the parameter display interface and settings, lightly press to switch, long press to modify the parameters, after modification. The parameters are automatically memorized after modification.
• Upward flip: press the parameter once to add one step upward. Press and hold to change the parameter display interface and settings, and press and hold to modify the parameter. After modification, the parameter will be memorized automatically.
• Төмөн: Press the parameter once to decrease one step downwards in the main interface, long-press the center key to display the word rESt, reset all the parameters except the battery.

Орнотуу нускамалары

1. Main interface: Press the menu key to select the interface to adjust the corresponding parameters and set the working status of the device.
2. Working Mode of Load Cot Manually Control Load Output Auto Auto Light Control Mode 00:58\0UT Continuous Output 00:58 Setting the time of load output after no sunlight, hour, and minute can be set individually. 0UT Continuous Output, 24 Hours Output Status.
3. Set real-time working status: d13.1V display battery voltage value, load output current display, d29.1 ℃ temperature display 3, d2.1 A solar charging current display, energy charging current display, high-current charging charging arrows flow fast, and vice versa slow, d0.0A output load current display, high-current discharging discharging arrows flow fast, and vice versa slow.
4. To set the charging battery voltage value, Auto0 automatic recognition mode, low voltage machine 12\24V, high voltagэлектрондук машина 12V 24V 36V 48V 60V.

Система туташуу

1. Connect the positive terminal of the battery to the controller as shown in the picture, and the controller will automatically detect the battery voltage.
2. Connect the load’s positive and negative poles to the controller as shown in the picture, and be careful not to reverse the connection.
3. Connect the solar panel to the controller according to the diagram.
   Эскертүү: Please follow the above order strictly to access; otherwise, it may damage the controller. Disassembling the order and wiring order is reversed.

   
   Батареяны колдонууда 0V баштоо жана батареяны оңдоо функциясын батареяны заряддоо үчүн эстеп калуу керекtage мааниси. Мисалы үчүнample: repair the battery for 12V, set bt12v and memorize it well, the battery can do 0V start without power behind.
   КОРКУНУЧТУУ ЭСКЕРТҮҮ: Only professionals can install this equipment. This equipment can only be connected to the solar panel to charge the battery.

Display Interface/Parameter Setting

Негизги интерфейстин сүрөттөлүшү

PV input and load output icons have three display states: normally lit (off), slow flashing (on), and fast flashing (the type of current parameter in the data field is the corresponding fast flashing icon, such as the fast flashing Volt input icon, the current parameter at the bottom is the PV input current).
Clock and Bluetooth connection icons have two display states: always on (off), blinking (on/connected). Bluetooth connection icons follow this display in any interface.

Кыйынчылыктарды табуу боюнча колдонмо

Аномалдуу көрүнүш	Мүмкүн болгон себептер	Чечим
Sunny but not charging	PV тактасы ачык же тескери	PV панелдерин кайра туташтырыңыз
The load logo does not light up	Туура эмес режим жөндөөсү	Кол режимин баштапкы абалга келтирүү
Жүктөө күйбөйт	Батарея көлөмүtage is too causingintthee g protection	Заряддоо
Жүктөө логотиби акырын бүлбүлдөтөт	Ашыкча токту жүктөө	Жүктүн күчүн азайтыңыз
Load logo blinks fast	Кыска туташуулардан коргоо	Remove the short circuit and recover on your The controller
er does not light up	Батарея көлөмүtage өтө төмөн/тескери	Replace battery/check reverse connection
Suddenly not charging	Solar panel disappears	Overheat protection, the device recovers on its own

Техникалык маалымдама

Кубатталуучу токтун номиналы	30A	40A	50A	60A
Номиналдуу разряддык ток	10A	20A	20A	30A
Ыкчам тандоо Орнотуу Кайра заряддалуучу Батарея 12V/24V	Li-ion батареясы	Colloid type		Диафрагма түрү
	12.2V/24.4V	14.2V/28.4V		14.6V/29.2V
Тез Тандоо Орнотуу Кайра заряддалуучу Батарея 60V	Li-ion батареясы	Colloid type		Диафрагма түрү
	61V	71V		73V
Күтүү агымы	<10мА
USB чыгышы	5V/2A Макс
Иштөө температурасы	-10 ~ +60℃
Өлчөмү/салмагы	170*95*45мм/300г

Түзмөктүн номерин байланыштыруу көрсөтмөлөрү

• The product supports WIFI/Bluetooth for global use.
• Please buy the right machine and do the corresponding settings and operation.
• Download and ZhiJinPower APP from the software store to support Android and Apple phones. Please download the appropriate software. The Bluetooth APP is for one-to-one use; only one cell phone can be accessed at the same time. The Wi-Fi/BT can be used globally. Sweep the box or manual QR code to download APP software, automatic identification and installation of Android and Apple phones in the main interface, click on the link Bluetooth/WIFI can be added by searching the name of the ZJXX device, WIFI first search for Bluetooth and normal control, through the “network to add WIFI and enter the password to complete the device connection. After the registration is completed, you must search for the correct Bluetooth ZJBE/ZJBX/ZJBW name in the APP interface and add the device to operate.

Орнотуу процесси

1. ZhiJinPower APP download link, or search ZhiJinPower
   • Android: https://tt.appc02.com/j73q9l
   • Apple: https://apps.apple.com/cn/app/zhijinpower/id6450771899
   • Customer PC the entrance link: http://app.gz529.com/VuGvSgOfDB.php/index/user..login Login account and password through the same cell phone, download and install the software, enter your cell phone number to register, and install the password 1234562.
2. Cell phone search ZJBX, ZJBW, ZJBX bluetooth number, add equipment, edit the name of the device to facilitate the operation of multi-device multi-projects.

   

Алыстан башкаруу APP иш нускамалары

APP интерфейсинин сүрөттөмөсү
The following specifically refers to the Bluetooth / WIFI connection and operation of the device with the network, open the cell phone Bluetooth and the controller to connect to the ZJBE-CXXXX Bluetooth automatically copy the current cell phone with the WIFI, enter the password and press the “Confirm”, when the machine is only connected to the Bluetooth, but also through the Bluetooth and the machine APP short-distance operation, WIFI connection to achieve remote control, mobile phone WIFI or traffic card for remote control. WIFI connection to realize remote control, cell phone WIFI, or traffic card for remote control.

1. Data acquisition corresponds to the machine, displaying the current working status of the device.
2. Parameter configuration can modify the solar control parameters and automatically memorize them after modification.
3. Real-time power generation collection and display, daily sunlight utilization power generation are clearly recorded.
4. Accumulated power generation, the first 4 bits are accumulating, and the last 4 bits are synchronized with the solar controller display.

Solar controller remote control adjustment

• Use battery type setting:
  • литий батарея
  • Гель батареясы
  • Lead-acid battery/Lithium iron battery
• Valid in timed output mode, turn off lights by hour after no sunlight, range 0–23 hours.
• Valid in timed output mode, turn off the light by the minute after no sunlight, range 0 – 59 minutes.
• Толук томду коюңузtage value of the battery to prevent overcharging and damaging the battery; the setting range is 12.0–15.0V, or you can select the appropriate parameters automatically when selecting the battery.
• Set the use mode of the load: 0 – manual control of the load output, 1 – automatic light control mode, 2 -load output when there is no sunlight, 3 – forever output,  and the other four use states.
• Set the value of over-discharge voltage of the battery to prevent over-discharge from damaging the battery; the setting range is 9.0–12.0V, or you can select the battery to choose the appropriate parameters automatically.
• Load output control, close or open, and display the current status through data acquisition.
• Батарея көлөмүtage selection: select the voltagкайра заряддалуучу батареянын e наркы, автоматтык аныктоо режими (төмөн тtage моделдери 12V жана 24V батарейкалары) же жогорку көлөмдөгүtage моделдери 12V, 24V, 36V, 48V, 60V батареяларды бекитет.

Көп берилүүчү суроолор

Can this controller be used with 36V or 48V batteries?

Yes, the controller can be manually set for 12/24/36/48/60V batteries.

What are the built-in protections in this controller?

The controller has protections against overheating, overcurrent, short-circuit, open-circuit, and reverse connection.

How do I adjust the charging and discharging parameters on the controller?

Use the menu key to switch parameter display interfaces and settings. Lightly press to switch, long press to modify parameters.

Документтер / Ресурстар

Power Home MPPT Bluetooth WiFi Күн контроллери [pdf] Колдонуучунун колдонмосу MPPT Bluetooth WiFi күн контроллери, MPPT, Bluetooth WiFi күн контроллери, WiFi күн контроллери, күн контроллери, контроллер

Шилтемелер

• User Manual