slime Tube Patch Kit
ПРОДУКЦИЯНЫ КОЛДОНУУ НУСКАМАСЫ
- 1-КАДАМ
- Use the scuffer to lightly scuff the area around the puncture.
- The area to be covered by the patch should feel rough to the touch.
- 2-КАДАМ
- Apply rubber cement onto the roughened surface.
- Gently work the rubber cement into the tube, spreading it evenly and scraping off any excess.
- 3-кадам
- Remove the foil backing from the patch without touching the sticky surface.
- 4-кадам
- Apply the patch (sticky side down) centered over the puncture and press firmly, especially around the edges.
- 5-кадам
- Remove the clear plastic film and wait for the rubber cement to fully dry before reinflating your tube to the recommended pressure.
КӨБҮРӨӨК МААЛЫМАТ
Документтер / Ресурстар
 |
slime Tube Patch Kit [pdf] Instructions Tube Patch Kit, Patch Kit |