TESmart HSW0401A1U

TESmart HSW0401A1U 4K HDMI Splitter User Manual

Model: HSW0401A1U | Brand: TESmart

Introduction

This manual provides detailed instructions for the installation, operation, and maintenance of your TESmart HSW0401A1U 4K HDMI Splitter. This device allows you to connect up to four HDMI source devices to a single display, supporting high-resolution video and versatile audio output options. Please read this manual thoroughly before use to ensure optimal performance and safety.

TESmart HSW0401A1U 4K HDMI Splitter

Figure 1: TESmart HSW0401A1U 4K HDMI Splitter

Пакеттин мазмуну

Бардык буюмдардын бар экенин жана бузулбаганын текшерүү үчүн алгандан кийин пакеттин мазмунун текшериңиз:

  • 1 x TESmart HSW0401A1U HDMI Splitter
  • 1 х IR алыстан башкаруу
  • 1 x DC 5V 1A Power адаптери
  • 1 x User Manual
Contents of the TESmart HSW0401A1U package

Figure 2: What's in the Box - HDMI Splitter, IR Remote, Power Adapter, and User Manual.

Продукт өзгөчөлүктөрү

  • 4-in-1-out HDMI Switching: Share one monitor, display, or projector among four HDMI source devices.
  • Жогорку чечим колдоо: Achieves resolutions up to 3840x2160@60Hz with 4:4:4 chroma subsampлинг.
  • HDMI 2.0 & HDCP 2.2 Compliant: Ensures compatibility with modern high-definition content and devices.
  • EDID Emulators: Features EDID emulators in each input port to ensure connected PCs always receive correct display information.
  • Multi-interface Audio Output: Supports independent audio output via S/PDIF optical and L/R AUX interfaces.
  • Аудио режимдери: Switch between 2.0, 5.1, and Auto audio output modes.
  • Multiple Switching Methods: Easy input source switching via front panel buttons, IR remote control, or automatic switching.
  • HDR 10 колдоосу: Enhances visual quality with High Dynamic Range.
  • Dolby TrueHD Support: Provides high-fidelity audio experience.
Image showing 4K@60Hz ultra high-definition support

Figure 3: Support for Ultra High-definition 4K@60Hz.

Diagram showing multi-interface audio output options

Figure 4: Multi-interface audio output supporting S/PDIF and L/R AUX.

Орнотуу нускамалары

Follow these steps to set up your HDMI Splitter:

  1. Өчүрүү түзмөктөрү: Ensure all HDMI source devices (e.g., gaming consoles, Blu-ray players) and your display are powered off before making any connections.
  2. HDMI булактарын туташтыруу: Connect up to four HDMI source devices to the HDMI Input ports (1, 2, 3, 4) on the rear panel of the splitter. Note that the input ports are labeled from right to left (Input 1, Input 2, Input 3, Input 4).
  3. HDMI дисплейди туташтыруу: Connect your HDMI display (TV, monitor, projector) to the HDMI Output port on the rear panel.
  4. Аудио чыгарууну туташтыруу (милдеттүү эмес):
    • For optical digital audio, connect an S/PDIF cable from the splitter's S/PDIF port to your audio receiver or soundbar.
    • For analog stereo audio, connect a 3.5mm audio cable from the splitter's L/R AUX port to your audio system.
  5. Туташуу кубаты: Plug the DC 5V 1A Power Adapter into the DC 5V port on the splitter and then into a power outlet.
  6. Түзмөктөрдү күйгүзүү: Power on your display first, then your HDMI source devices.
Diagram of TESmart HDMI Splitter front and back panels with labeled ports

Figure 5: Front and Rear Panel Layout with Input/Output Ports.

Видео 1: кутудан чыгаруу жана андан ашыкview of the TESmart HDMI Splitter's ports and features.

Иштөө нускамалары

The TESmart HDMI Splitter offers several methods for switching between input sources and adjusting audio settings:

Киргизүү булагын алмаштыруу:

  • Front Panel баскычтары: Press the 'Input' button on the front panel to cycle through the connected HDMI sources (1, 2, 3, 4). The corresponding Input Selection Status LED will illuminate.
  • IR алыстан башкаруу: Use the included IR remote control to directly select an input source by pressing the numbered buttons (1, 2, 3, 4).
  • Автоматтык которуу: The splitter supports automatic switching. When a new active HDMI source is detected, the splitter can automatically switch to that input.

Audio Format Selection:

  • Press the 'Audio' button on the front panel or the remote control to cycle through audio output modes: 2.0 (stereo), 5.1 (surround sound), or Auto (automatic detection). The Audio Format Indicator LEDs will show the current selection.
Diagram illustrating multiple switching methods for the HDMI Splitter

Figure 6: Multiple Switching Methods including front panel buttons and IR remote control.

Колдонуучу сунуштар

  • For best performance, use high-quality HDMI 2.0 cables, especially for 4K@60Hz signals.
  • If you experience issues with video or audio, try power cycling all connected devices (splitter, sources, display) in sequence.
  • Ensure your display and source devices support the desired resolution and refresh rate (e.g., 4K@60Hz) for optimal picture quality.

Проблемаларды чечүү

If you encounter problems with your HDMI Splitter, please refer to the following common issues and solutions:

  • No Video/Audio Output:
    • Бардык HDMI кабелдеринин туташууларынын коопсуздугун текшериңиз.
    • Verify that the correct input source is selected on the splitter.
    • Ensure the display is set to the correct HDMI input.
    • Башка HDMI кабелин колдонуп көрүңүз.
    • Power cycle all devices (splitter, sources, display).
  • Жаркылдаган же үзгүлтүктүү сигнал:
    • Ensure HDMI cables are of high quality and rated for the resolution being used (e.g., HDMI 2.0 for 4K@60Hz).
    • Reduce cable length if possible.
    • Башка электрондук шаймандардын кийлигишүүсүн текшериңиз.
  • No 5.1 Audio:
    • Ensure your source device is outputting 5.1 audio.
    • Set the splitter's audio mode to '5.1' or 'Auto'.
    • Verify your audio receiver/soundbar supports 5.1 audio and is correctly configured.
  • Алыстан башкаруу иштебейт:
    • Ensure the remote has fresh batteries (requires 2x AAA batteries).
    • Point the remote directly at the IR receiver on the front of the splitter.
    • Remove any obstacles between the remote and the splitter.

Техникалык шарттар

Өзгөчөлүк Деталь
Модел HSW0401A1U
HDMI версиясы HDMI 2.0
HDCP Нускасы HDCP 2.2
Video Resolution Up to 4K@60Hz (3840x2160@60Hz 4:4:4)
HDR колдоо HDR 10
Аудио чыгаруу S/PDIF Optical, L/R AUX (3.5mm)
Аудио режимдери 2.0, 5.1, Авто
Киргизүү порттору 4 x HDMI
Output Ports 1 x HDMI
Электр камсыздоо DC 5V 1A
Контролдоо ыкмалары Front Panel Buttons, IR Remote Control, Automatic Switching

Техникалык тейлөө

To ensure the longevity and proper functioning of your HDMI Splitter, follow these maintenance guidelines:

  • Keep the device in a cool, dry, and well-ventilated area, away from direct sunlight, heat sources, and moisture.
  • Аппаратты экстремалдык температуранын же нымдуулуктун таасиринен сактаңыз.
  • Түзмөктү жумшак, кургак чүпүрөк менен тазалаңыз. Суюк же аэрозоль тазалагычтарды колдонбоңуз.
  • Түзмөктү ачууга же өзгөртүүгө аракет кылбаңыз, анткени бул кепилдикти жокко чыгарып, зыян келтириши мүмкүн.
  • Disconnect the power adapter if the device will not be used for an extended period.

Кепилдик жана колдоо

For technical support or warranty inquiries, please contact TESmart customer service using the information below:

  • WhatsApp: +86 18473951878
  • Электрондук почта: 17680775530@163.com
Contact information for TESmart customer service

Figure 7: TESmart Customer Service Contact Information.


TESmart 4K HDMI Switch HSW0401A1U Unboxing and Feature Overview

TESmart 4K HDMI Switch HSW0401A1U Unboxing and Feature Overview

0:45 • 1280×720 • кутудан чыгаруу

Тектеш документтер - HSW0401A1U

Preview TESmart HSW0401A1U 4x1 HDMI которгучу колдонуучусунун колдонмосу
TESmart HSW0401A1U 4x1 HDMI которгучу үчүн колдонуучунун колдонмосу. Бул колдонмодо HDMI которгучу үчүн функциялар, орнотуу, туташтыруу, иштетүү, коопсуздук кеңештери жана техникалык колдоо боюнча кеңири маалымат берилген.
Preview TESmart 4x1 HDMI KVM Switch User Manual - 4K@60Hz, USB 2.0
Comprehensive user manual for the TESmart 4x1 HDMI KVM Switch. Learn about features, panel description, connection diagram, hotkey controls, IR remote operation, and warranty information for seamless 4K@60Hz video and USB 2.0 device sharing.
Preview TESmart 8x1 and 16x1 HDMI Switch User Manual
Comprehensive user manual for TESmart 8x1 and 16x1 HDMI Switches (models HSW0801A1U & HSW1601A1U), detailing features, connections, operation via front panel buttons, IR remote, RS232, and LAN control. Includes safety tips, warranty information, and software controller usage.
Preview TESmart KVM Switch Troubleshooting Guide
Comprehensive troubleshooting guide for TESmart KVM switches, covering common issues with hotkeys, keyboard/mouse, video signals, and refresh rates. Includes solutions and support information for models like HKS0401A1U.
Preview TESmart Dual Monitor KVM Switch User Manual
Comprehensive user manual for the TESmart 4x2 Dual Monitor KVM Switch. This guide covers product features, packing list, panel descriptions, display modes, connection diagrams, usage instructions, keyboard hotkeys, IR remote control, verified peripherals, warranty information, and technical support.
Preview TESmart кош монитору KVM колдонуучусунун колдонмосу: Эки компьютерди кош дисплей менен башкаруу
Толук орнотуу, функциялар жана иштөө үчүн TESmart Dual Monitor KVM Switch колдонуучу колдонмосун карап чыгыңыз. Бир гана перифериялык түзүлүштөр жана кош мониторлор менен эки компьютерди натыйжалуу башкарууну үйрөнүңүз.